AutoCAD LT :: Unselectable Lines Appearing At The End Of Each Drawn Line
Aug 26, 2013
Any one deal with lines that appear to the right of each line that is drawn? For example if I draw a vertical line I get a line at the start point and the end point that display off to the right 2 cm or so. Zoomed in or out, always about 2 cm. After about 15 minutes, every line does this. Pretty bothersome. I thought it was a graphics card but the blocks in my drawings go off to the right in which they were created. So if the block is rotated, these little 'tails' rotate with it.
I tried some troubleshooting - Reinstalling/updating graphics card driver, switching monitors, but no luck.
I have 8gb of ram on a windows 7 Bit system, and have an Autodesk/AutoCAD certified graphics card - an AMD FirePro 3900 (ATI FireGL). You'd think that this 'certification' would prevent problems like this. What do I know.
On a side note, Draw Order > send to back/send to front does not appear to work either on my display.
View 8 Replies
ADVERTISEMENT
Aug 5, 2013
I have text from dt command, circle and leader line. After selecting them I use the copy command and starte pasting all over my drawing. Probable about 6 copies. about 3 or 4 of them end up not being able to select them. So if i want to edit the text, move all three entities or just delete them i cant. I figured out the only way to delete these "unselectable" objects i copied is to only have that layer on, type selectall and delete. Why this happens and why if i did 6 pastes it only happens to 3 or 4 of them? does it have to do with feature lines? I do have 3d lines in this dwg but i should still be able to select what i copied.
View 7 Replies
View Related
Apr 16, 2013
I draw a T with the pen tool, supposed to be vectorial, that is, you can enlarge it without losing quality.
But the top edge appears pixeled! Why??
View 10 Replies
View Related
Nov 24, 2011
For some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies
View Related
Jun 6, 2012
Is it possible to compress a line or object drawn on top of another line or object to create one object?
I import my AutoCAD 2011 drawings into a CNC however the software isn't happy if a line is drawn on top of another line. If this happens it is not obvious simply by looking at the drawing and I have to go through the drawing checking each and every line which can be quite time consuming.
View 9 Replies
View Related
Apr 22, 2013
I just upgraded from AutoCad LT 2008 to 2013. I cannot offset a line that is drawn the x-axis. I also cannot copy an item with the ORTHO command on and run it along the x-axis. I'm only allowed to move it along the y-axis. I've now waisted at least three hours messing with every possible command that I can think of trying to fix it. What do I have set wrong?
View 9 Replies
View Related
Oct 18, 2012
I use splines a lot to provide a contiuous smooth curve between two lines which are co-planar. The splines are drawn by connecting the ends of the two lines and then the tangent direction set by hovering over the end grips. I then use the FLATEN command to convert these splines to polylines that can have their lineweights set to a value other than 0. My problem is that sometimes when i use the FLATTEN command, the spline is erased.
View 7 Replies
View Related
Aug 24, 2012
I'm wanting to have vertical and horizontal construction lines already created whenever I start a sketch so that I can set symmetric constraints to the part I'm drawing up. At the moment, I have to draw both lines every time and constrain them to the center point. It would be much easier if it was already there when I started so I can start on the sketch right away. Is there a way to do this? I've included a photo of what I'd like to do.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professional 64-bit
View 9 Replies
View Related
Oct 13, 2010
I was wondering is there an option where you can dim or change the opacity of a drawn line? Similar to when you can change the linetype and linewieght, is there a precentage that allows to dim lines? Like when you insert .pdf plans as underlay, and you can actualy reduce the opacity. So that when you plot the plan drawing, some lines look solid black, but some are almost impossible to see? Or should I just change the colour of the line to light gray?
View 5 Replies
View Related
Sep 12, 2011
I have existing drawings that I copy and manipulate into new ones. I have a drawing of a conveyor line that has some segments "highlighted" with a yellow hatch that appears to follow a single line. The conveyor layout has been changed. So I need to update the drawing for the new layout. I'm wondering how this was drawn. I cannot explode the hatch to copy parts of it. I'm thinking there was probably a simple way to get the hatch to follow the drawn line. Putting boundaries around the drawn line to hatch in would be rather time consuming. Is there a simple function I don't know about?
View 6 Replies
View Related
Nov 21, 2012
I have a user that when he draws the first line he does not see it until the second line or other action is taken. Photoshop is similar to this when drawing lines. Is there a setting to change that in the command line?
View 2 Replies
View Related
May 27, 2012
I am new to AutoCAD and I want to draw something in it, I have taken screen shot of a google map and placed it in AutoCAD, Now I want this map to be scaled proper size, for example I have 880meter x 330meters but placed object is only 20' x 15'.
How can I resize it or how can I make my drawn line to be exact 880meters ? ( I will resize my picture according to my drawn line).
View 1 Replies
View Related
Nov 14, 2012
I was making a drawing and i don't know what i did but now anything i draw is not visible on screen although it is actually there because i can select it.
View 2 Replies
View Related
May 15, 2013
I have pieced this lisp together from a few I have come across here in the groups, but am now stuck with the final pieces. Once the pline is drawn I would like the lisp routine to select the pline (last ?) instead of the user doing so. I would then like to offset the line 1 (foot) and then erase the original line drawn, so the user does not have to.
View 9 Replies
View Related
Sep 22, 2012
With my inkling pen i've created a drawing for PS. It now contains 30 layers, each one has a line. I would like to animate these lines/layers, so it looks (in an animated gif) like the lines are drawn one by one.
Is there a "quick" way to do so?
View 7 Replies
View Related
Sep 20, 2012
I am using vanilla autocad 2011. installed from the autocad mechanical suite. I keep having a problem when copying blocks, leader lines and text, they sometimes apear bold in paper space. I have used the trick of changing the Z dimension from 0 to 1 and back to 0. My leader lines do not have the ability to do that. How can I keep this from happening. Autocad 2010 never had this isssue. Attached is a capture of the problem, you will see the bold text.
View 3 Replies
View Related
Jun 19, 2013
I'm having a problem with "phantom" lines appearing in PDF plots.
The Situation:
The firm I work for often uses Excel tables in Autocad LT 2013. I have learned through experience its better to use a linked table, but in this situation only paste special is an option due to time constraints.
Basically when we try to plot a DWG with tables specially pasted in the drawing space phantom lines appear.
But only when we try to convert to PDF. In the plot preview everything is fine, but when the PDF is created vertical lines appear in the tables on the actual PDF.
I've tried many different options to fix this but so far the only thing that has worked is, converting the DWG to a DWF and opening in Design Review. From there I plot to PDF and everything is fine, no lines appear.
In the DWG I have tried tweaking the Plot Quality for the "pasted" tables to no avail.
View 8 Replies
View Related
Dec 19, 2012
I have a linetype that is a drain line so it's dashed and has a "D" within it along with an arrow pointing in the direction of flow. The drawing I have contains many of these lines ehich display properly in the viewport meaning you can see the dashes, D's and arrows.
Problem is, I got an as-built from a contractor as pasted it into my drawing. His lines look fine in my model space, but in my viewport the lines appear solid and you don't see the dashes, D's or arrows. I tried MATCHPROP to make the contractors lines match my existing lines but that did not work. I tried andjusting the linetype scale but that doesn't work either.
View 4 Replies
View Related
Jan 25, 2013
My work is generally calligraphy, it is all drawn by hand but would like the option to smooth it out on Photoshop if possible? I have attached a copy of the artwork,
View 9 Replies
View Related
Jan 3, 2013
I was wondering if there's any easy way to make lines to appear less precise as if they were hand drawn with a pencil?
eg.
I have seen brush strokes, but they only really provide a texture rather than a variation in the line as far as I have seen.
View 9 Replies
View Related
Sep 3, 2013
I recently got a new drawing tablet (Monoprice Graphics Tablet) and i set up everything perfectly fine. However, i opened photoshop cs6 and when i draw, there would be an extra line. when i draw a semi circle, it automatically completes the gap with a straight line when i lift the pen up or stop drawing and it's really bothering me.
Here is a gif that i made to demonstrate what i mean: (click if it doesn't move)also... my lines appear to be sort of jittery or non-smooth. even my mouse looks smoother than when i use my pen..
View 1 Replies
View Related
Dec 3, 2012
I have a problem with a File in Autocad.
We have a dynamic block here at work that has a solid hatch in it. It is a simple block which only utilizes a dropdown menu.
This block is a circle with a solid hatch in it. However when I select the block via dropdown menu, the hatch is not solid, it is a bunch of lines originating from the center of the circle.
I have never had this problem before with this block and nothing has changed with the block.
It also works fine when I open up other drawings.
This tells me that there is a problem with the settings of this specific file but I cannot figure out what setting.
I believe the problem occurred because I brought my work home with me and I have different settings on my autocad (both ACAD 2011).
View 1 Replies
View Related
Apr 28, 2011
A coworker is trying to publish a bunch of drawings to dwf and is having problems with the linetypes. Essentially, after publishing, the hidden lines are showing up dashed in some drawings and solid in others. We've tried setting the ltscale to 1 and the psltscale to 0. We are using AutoCAD 2007. Additionally, when we look at one tab in paperspace, the lines look correct, on another, the dashes look smaller. I'm at a loss as to what to do.
View 3 Replies
View Related
Sep 6, 2013
I know that I can animate using basics animation feature un Xara. Any way to create an animation showing every line drawn. Like in this exemple : [URL] I could record xara using screencast software but maybe there is a way to do it in automaticaly in Xara one the drawing have been made or maybe a software in wich I can import svg file to animate the lines.
View 7 Replies
View Related
Dec 25, 2012
How to choose the thickness change line drawn?
or
Select the objects to be drawn?
View 5 Replies
View Related
May 10, 2011
I have a cartoon line drawing. The black outlines are anti aliased so the edges of the lines have different grades of gray pixels on them. When I use the fill tool, and adjust the fill with the opacity and tolerance sliders, (I think that's what they're called in GIMP), I still can't get what I want. Only some of the gray pixels are colored in. Others are canceled out. Completely covered by the color, erasing some of the line.
Or some pixels remain uncolored. Just gray instead of a combination of the gray AND the fill color. What I'm looking for is an effect that looks like I placed a colored gel shaped like the cartoon character over the drawing. All the different shades of gray pixels should still be seen. Even the ones that are lighter than the fill color. With a gel, those pixels would appear darker, even though they were lighter than the fill color without the gel over them. The darkness of the color PLUS the added darkness of even the lightest gray pixels should make all the pixels appear darker. And the line would appear complete. Not partially erased.
Is it at all possible to get this effect?
View 8 Replies
View Related
Jul 23, 2013
I cannot determine what triggers this but the command line has stopped returning values from lisp expressions.
eg. If I type (setq fred "Hello") I would expect to see "Hello" returned. I am getting nothing. Similarly if I type !fred I get nothing. If I restart AutoCAD the problem goes away. The after some time it happens again. Is there a toggle or switch or system variable that I'm not aware of?
View 4 Replies
View Related
Feb 9, 2014
I am making a conatct sheet of photos. I wanted to define the outside edge of the photos, so I used the Rectangular Marquee to draw an outline around the perimeter, and then I went to Edit>Stroke (Outline) Selection. I chose the weight of the line (I made it 3 pix) and successfully had the outline. I then saved the file.
But now I want to change the weight of the line (down to 1 pix). But I can't figure out how to delete the 3 pix line.
View 1 Replies
View Related
Jan 13, 2013
I am using illustrator for doing some calligraphy and I am not really experienced with this program. I am using a mouse pen with pressure to draw/write calligraphies. My question is, can I change the pressure amount after I drew lines using brush tool. Let’s say I drew a line, it is good but still not satisfactory. I just want to do a little change in pressure amount in some segments –not all the line- on line. Does illustrator give me this option?
View 5 Replies
View Related
Oct 9, 2012
Whilst editing images in photoshop cs3 (using power mac), random horizontal lines are appearing on images. Usuall just one or two and the only way to get rid of them is to edited/erase them out....
I have tried saving and opening image on another mac and it still shows up...
View 3 Replies
View Related
Jul 26, 2008
I'm having a really weird problem. Sometimes I like to add a texture to a drawing, to do so I add the texture in a layer above the drawing, set the layer mode to Multiply and adjust the opacity. Simple and easy.
But now I'm getting this weird "film" of lines appearing in that layer everytime I adjust the opacity, they become even worse when I add color...I use a normal brush and it actually paints lines rather than solid color!
View 16 Replies
View Related
