I know that I can animate using basics animation feature un Xara. Any way to create an animation showing every line drawn. Like in this exemple : [URL] I could record xara using screencast software but maybe there is a way to do it in automaticaly in Xara one the drawing have been made or maybe a software in wich I can import svg file to animate the lines.
View 7 Replies
I have created a simple animation with 6 frames in the gallery. I want to link each individual frame to different websites. So, as the animation on the site is changing, you can click on one frame, and it takes you to one site, or you click on the next frame and it takes you to another site.
View 2 Replies View Relatedthis is from the magix website. how to create this in xara
View 9 Replies View RelatedHow do I create a Line-Map animation effect? i am trying to highlight a 'Route' on a map.
View 1 Replies View RelatedIm trying to create a line that starts a one point then it moves 90 degrees one direction then 90Deg in another direction so i get like a maze effect. When i use the line tool and draw a line holding down i think SHIFT to make it 90deg when i let go to finish the line and then try and draw on the end of the line i cannot! It just gives me a grab handle for the end of the line but i want to continue drawing the line adding to it so to speak.
View 7 Replies View RelatedIs it possible to compress a line or object drawn on top of another line or object to create one object?
I import my AutoCAD 2011 drawings into a CNC however the software isn't happy if a line is drawn on top of another line. If this happens it is not obvious simply by looking at the drawing and I have to go through the drawing checking each and every line which can be quite time consuming.
I was wondering if there's any easy way to make lines to appear less precise as if they were hand drawn with a pencil?
eg.
I have seen brush strokes, but they only really provide a texture rather than a variation in the line as far as I have seen.
I hand drew some pictures of rats that I have to use for a video pitch assignment. I'd like to add some fur using the live effect found in the Eye Candy 4000 plugin. I have disabilities and drawing in Xara is very difficult. Is it possible to add a live effect to a picture without having to draw over it using the program? I also drew smiling cheese that I'd like to add the gradient glow live effect to.
One of my rats (fur live effect wanted): [URL]
Smiley cheese (glow live effect wanted): [URL]
I've got a very annoying problem. When drawing rectangles with grid / guidelines showing using 960 Grid System (although it happens with other documents as well), the edges of the rectangle are not sharp, e.g. http://img16.imageshack.us/img16/6232/blurred.png - note top and right side is blurred. There are no styles applied.
When I switch off grids / guidelines, the rectangles are always sharp.
Also, resizing rectangles causes loss of sharpness to edges.
Using CS4.
I recently got a new drawing tablet (Monoprice Graphics Tablet) and i set up everything perfectly fine. However, i opened photoshop cs6 and when i draw, there would be an extra line. when i draw a semi circle, it automatically completes the gap with a straight line when i lift the pen up or stop drawing and it's really bothering me.
Here is a gif that i made to demonstrate what i mean: (click if it doesn't move)also... my lines appear to be sort of jittery or non-smooth. even my mouse looks smoother than when i use my pen..
I was wondering is there an option where you can dim or change the opacity of a drawn line? Similar to when you can change the linetype and linewieght, is there a precentage that allows to dim lines? Like when you insert .pdf plans as underlay, and you can actualy reduce the opacity. So that when you plot the plan drawing, some lines look solid black, but some are almost impossible to see? Or should I just change the colour of the line to light gray?
View 5 Replies View RelatedI have existing drawings that I copy and manipulate into new ones. I have a drawing of a conveyor line that has some segments "highlighted" with a yellow hatch that appears to follow a single line. The conveyor layout has been changed. So I need to update the drawing for the new layout. I'm wondering how this was drawn. I cannot explode the hatch to copy parts of it. I'm thinking there was probably a simple way to get the hatch to follow the drawn line. Putting boundaries around the drawn line to hatch in would be rather time consuming. Is there a simple function I don't know about?
View 6 Replies View RelatedAny one deal with lines that appear to the right of each line that is drawn? For example if I draw a vertical line I get a line at the start point and the end point that display off to the right 2 cm or so. Zoomed in or out, always about 2 cm. After about 15 minutes, every line does this. Pretty bothersome. I thought it was a graphics card but the blocks in my drawings go off to the right in which they were created. So if the block is rotated, these little 'tails' rotate with it.
I tried some troubleshooting - Reinstalling/updating graphics card driver, switching monitors, but no luck.
I have 8gb of ram on a windows 7 Bit system, and have an Autodesk/AutoCAD certified graphics card - an AMD FirePro 3900 (ATI FireGL). You'd think that this 'certification' would prevent problems like this. What do I know.
On a side note, Draw Order > send to back/send to front does not appear to work either on my display.
I have a user that when he draws the first line he does not see it until the second line or other action is taken. Photoshop is similar to this when drawing lines. Is there a setting to change that in the command line?
View 2 Replies View RelatedHow to choose the thickness change line drawn?
or
Select the objects to be drawn?
I am new to AutoCAD and I want to draw something in it, I have taken screen shot of a google map and placed it in AutoCAD, Now I want this map to be scaled proper size, for example I have 880meter x 330meters but placed object is only 20' x 15'.
How can I resize it or how can I make my drawn line to be exact 880meters ? ( I will resize my picture according to my drawn line).
I have a cartoon line drawing. The black outlines are anti aliased so the edges of the lines have different grades of gray pixels on them. When I use the fill tool, and adjust the fill with the opacity and tolerance sliders, (I think that's what they're called in GIMP), I still can't get what I want. Only some of the gray pixels are colored in. Others are canceled out. Completely covered by the color, erasing some of the line.
Or some pixels remain uncolored. Just gray instead of a combination of the gray AND the fill color. What I'm looking for is an effect that looks like I placed a colored gel shaped like the cartoon character over the drawing. All the different shades of gray pixels should still be seen. Even the ones that are lighter than the fill color. With a gel, those pixels would appear darker, even though they were lighter than the fill color without the gel over them. The darkness of the color PLUS the added darkness of even the lightest gray pixels should make all the pixels appear darker. And the line would appear complete. Not partially erased.
Is it at all possible to get this effect?
I am making a conatct sheet of photos. I wanted to define the outside edge of the photos, so I used the Rectangular Marquee to draw an outline around the perimeter, and then I went to Edit>Stroke (Outline) Selection. I chose the weight of the line (I made it 3 pix) and successfully had the outline. I then saved the file.
But now I want to change the weight of the line (down to 1 pix). But I can't figure out how to delete the 3 pix line.
I have pieced this lisp together from a few I have come across here in the groups, but am now stuck with the final pieces. Once the pline is drawn I would like the lisp routine to select the pline (last ?) instead of the user doing so. I would then like to offset the line 1 (foot) and then erase the original line drawn, so the user does not have to.
View 9 Replies View RelatedI am using illustrator for doing some calligraphy and I am not really experienced with this program. I am using a mouse pen with pressure to draw/write calligraphies. My question is, can I change the pressure amount after I drew lines using brush tool. Let’s say I drew a line, it is good but still not satisfactory. I just want to do a little change in pressure amount in some segments –not all the line- on line. Does illustrator give me this option?
View 5 Replies View RelatedSo I am basically a brand new user to ai-cs6 and have been working on a project for a friend. I've drawn up the basic components of the logo she wants, all separate individual pieces. My intention is/was to trace in each piece, and scale, rotate, and clean them up according to how the final piece should look. Where I'm running into trouble is that the sketches are not point perfect, meaning there's some shading in the hand drawn, and the lines are rough in areas. I'm trying to avoid redrawing the pieces because we both are really happy with where they're at.
What I'd like to do with ai-cs6. How to trace very simply a one line vector of the outline of the image. So instead of creating a piece that has stroke straight from the scanned in artwork, I get a single line, with multiple points, that flows the simple shape of the piece. From there it seems it would be pretty simple to just increase the stroke weight and modify the style of line to make it look how we would like. except that since the sketch has some rough line sections ai-cs6 is adding either a lot of detail and making it look pretty rough, or it's missing entire sections and leaving them blank.
Okay I'm making an image and I want to create a black border around a freely drawn selection but then feather it in so the opacity of the black border starts at 0 and ends at 100. How would I do this?
View 4 Replies View RelatedI'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
how I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies View Relatedin iParts factory I would like to create part ## by setting common name and adding to it different values drawn from part parameters.
Please refer to attached image – common name in that example would be “DRILL” and description of the diameter and length automatically taken from parameters in columns “DRILL_D” & “INSERT_L”.
Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
how to create a vacuum sucking animation?
What I need to do is suck little strands of something I made into/thru a hollow a needle.
I'm just starting out with animating for a project. I'm trying to animate a weapon, but the bones are not showing, I've tried pretty much everything. The bone helpers are showing, but not the bones themselves:
View 3 Replies View RelatedI am having difficulty with the pdf export settings.It seems like it is working fine but text will not show up when viewed on Apple computers/ipad/iphone. Pdf opens fine on my windows system.I know that I can "print" to a pdf viewer like "cute pdf" or similar but those viewers distort and cut off pages and are a general pain to use with xara.
I could also convert the text to "editable shapes" but then all the 'l' 's look terrible and the text generally looks very rough and horrible.
I have been exporting docs to pdf/x and the fonts are not showing up on Macs only on pc's? If this is a bug I hope we are not going to have to wait until next version for this to be fixed.
View 3 Replies View RelatedI use Xara Xtreme Pro 3, and when I open a pdf file for editing, the color gradients don't show up. They are definitely there in the pdf file (I can see them in Adobe Reader) but Xara doesn't seem to display them.
Let me know if I can upload images, pdfs, more info, etc
