Xara :: How To Combine Curved Line With Base Line Of Green Rectangle
Nov 17, 2013how I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Green Line Changes Its Relationship To Dark Line
Dec 5, 2012The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies View RelatedAutoCad :: How To Not Make Curved Line Break Into Straight Line Segments
Jun 27, 2012I draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
Xara :: How To Draw Rectangle With One Curved Corner
Feb 22, 2012There are many ways to skin this particular cat. This is the way that I do it.
View 9 Replies View RelatedAutoCAD Civil 3D :: Curved Label For Curved Feature Line?
Mar 8, 2013How to create a flow arrow label for a feature line that parallels the curve?
I've a vague notion that this could be done with a dynamic block and a few fancy expressions. I'm comfortable with expressions, but I've never used dynamic blocks at all, so I wouldn't know where to start.
To be clear, I know curved text is possible, but I'm looking for a curved line (ie an arc) that would look 'parallel' to the arc of the feature line (ie have the same centre point). This would have to be dynamic to allow for different radii and for flipping to the left and right side of the feature line.
Revit :: How To Constrain Curved Ribs On A Curved Roof Line
Jan 26, 2014Having a time getting ribs to align 2m below top of ridge beam, and connect to curved wall below. I created one, then arrayed, but the radius changes at each 2.5 degree interval. I don't think I should have to calculate the % radius change to get the beams to do this. Some constraint button maybe?
Not sure if editing a wall profile is the best way to model this, but it's working.
Photoshop :: Base Line Shift
Mar 17, 2005What is the default setting for base line shift in the Character pallet?
Mine is always default to 51.66pt but I believe this is incorrect. I have looked on other photoshop users computers and they seem to have 0.8pt. How can I reset the default if this is incorrect??.
AutoCAD LT :: Aligning Boxes To One Base Line
Jan 7, 2013In my drawing I have 6 rectangular object and of different sizes. I want to align them to one base line or align bottom as in visio. How can I do that?
View 9 Replies View RelatedLightroom :: Printing Adds Green Line To Top Of Picture?
Dec 23, 2011Starting this week, when I print my note cards from LR, the greenish line (aproximately 1/8") is added to the top of every photo. It's not noticable if I do draft mode printing. Also, if I print to jpeg file, then print this file outside LR, it's not there. I blamed it on 3.6 upgrade first, rolled back to 3.5, but it haven't solved the problem. I'm on Windows 7 and HP Photosmart Premium C309a printer. I really need to print lots of cards and I cannot!
Addition on 12/17/11 - the line is not noticable on black or any darker color.
Photoshop :: Curved Line?
Nov 12, 2007Is it possible to draw a curved line, preferably with arrows at one or both ends? Lines drawn with the freeform brush are too jaggedy; I'm looking for something with intermediate handles that will make smooth curved leaders for text annotation of features in photos.
I've figured out how to make paths...what I'm trying to do is make a line that follows a path - without having the program "fill in" the path-defined region.
AutoCAD 2010 :: Base Line Spacing Operational
Nov 26, 2012I normally use AutoCAD Electrical 2012 but my problem is AutoCAD so I thought I would log it here.In ACE there are default profiles for ACE and Vanilla AC. I use the Vanilla AC for basic CAD drawings.
I like the feature "Base Line Spacing" for dimensions, to state the obvious,BUT it I do some vertical dims then try to do some horizontal dims (both in base line spacing) the software wants to stay in vertical BSL.
I can find is to create a standard DIM, delete it, then i can do a selection of horizontal BSL.Is this how it works in AC2012? Or is it a function of ACE? There are some other functions in ACE that do not work in standard CAD under the CAD profile.
AutoCAD 2010 :: Drawing A Line From Base Coordinate?
Jul 9, 2012We have a new PC set up, and the user is trying to draw a line, starting from point 0,0,0. AutoCAD won't let him draw a line from that coordinate.
How do we get AutoCAD to draw from the BASE coordinate? Is there a new switch that's messing this up?
AutoCad :: Base Point Is Offset From Extended Line
May 12, 2011I meet a problem in autocad2010. the normal situation is : the base point is in the line of extended line for dimension. see the picture.
but in my condition,the base point is offset from the extended line .see the picture. how can I solve this?
Photoshop :: Remove Fine Green Line Clone Healing
Aug 8, 2009I am getting photos ready to be used in a Premeire Pro video. I was given these photo by someone who scanned them. There is a fine green line running through some of them. I have tried removing it with the clone and the healing tools but they don't work on it (they DO work on the rest of the photo). I cannot figure out how to get rid of this line. There are no layers to flatten. Any help would be appreciated. I have never seen this before.
View 2 Replies View RelatedAutoCAD Inventor :: Origin And Line Midpoints Not Turning Green
May 21, 2012All of a sudden when i create a circle on the origin it is not turning green and constraining the circle to it. Also when i am creating a line from the midpoint of another line the midpoint is not turning green and the line is not constrained to that point. I have checked the autoproject origin box in the appl settings and it is active.
View 8 Replies View RelatedPhotoshop Elements :: 10 - Green Line Appeared Across Center Of Page
Oct 25, 2012I am new to Photoshop (Elements Vers 10).
Today I have been working on a photo (cloning out the background) and after about 4hrs work a thin green line about 1-2 pixel thick, has appeared across the center of the page. How it got there but I can not remove it.
I have tried saving the project (as a photoshop file) and then opening it as a new project in an old version of Photoshop (Vers 3 ?) to see if I could clone out the line, but it will not permit me to clone it.
What the line is, what I did to cause it to appear and how do I get rid of it. I possibly could export the project as a JPG and start as a new project.
Photoshop :: Making A Curved Line
Sep 27, 2005I am having a heck of a time trying to make a curved line. I have Photoshop version 8.0
Can this only be done using the Pen?
Can I use the 'line' tool and curve that line somehow?
The graphic I am trying to make is the bottom of a boat anchor.
Photoshop :: How Can I Make A Curved Line
Aug 14, 2007Ho can I make a curved line like on the image but in a shape of an egg? What I mean is, line going from thick to thin.
View 3 Replies View RelatedPhotoshop :: How To Make A Curved Line?
Mar 24, 2004Im trying to re-create this logo and cant figure out how to make that swoosh line thing.
View 3 Replies View RelatedPhotoshop :: Really Simple Curved Line
Dec 2, 2004I have a photograph of a female model and I need to draw lines onto the photograph to show where the waist and chest measurements would be. I guess I need a solid eliptical line which passes in front of the model and then a dotted line which shows where the ellipse would pass behind her.
View 3 Replies View RelatedAutoCad :: How To Draw The Curved Line
Dec 8, 2012At the top of the clock, how do you draw the curved lines, which say radius of 4.
[URL]........
Illustrator :: Make Text Align Using Their Base Line Not Their Bounding Box?
Dec 2, 2012Left: 'vertical align bottomed text with the box of black stroke
Right: manually moved text with smart guide to align with its base line.(what I want to achieve)
As you can see in the left one, text has its base line under itself, and its bounding box doesn't match its base line. when I use align, it doesn't align using its base line but its bounding box.How can I make text align using their base line easily?
AutoCAD Inventor :: Line Snap - Cursor Turns From Yellow To Green
Apr 19, 2011I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies View RelatedRevit :: Array Component Along Curved Line
May 3, 2012Is it possible to array a component along a curved line?- I want to set out trees at a regular spacing along a path which has several bends in it.
View 1 Replies View RelatedAutoCad 2D :: How To Calculate Area Of Curved Line
Jul 9, 2013I have a bench which I have drawn in CAD, and I want to calculate the area.
The bench is a sort of "S" shape.
In the past I have only calculated the areas of straight objects and so have been able to pick points, but i'm not sure how to go about it when the object includes a curve.
Paint.NET :: How To Create Text In Curved Line
Aug 1, 2011My question is how do I create text in a curved line? I have a circular logo which I want to have a curved line of text above and below. I can create the text OK but I can't see how to make it curved.
View 2 Replies View RelatedIllustrator :: How To Place Type On A Curved Line
Dec 25, 2013Try to place text on a curved line. What the easiest wat in Illustrator? Is this the best product to use?
View 1 Replies View RelatedPhotoshop Elements :: How To Draw A Curved Line
Oct 3, 2012Is it possible to draw a curved line. I am using the line tool but is there a way to get it to bend?
View 4 Replies View RelatedPhotoshop :: Custom Brush Flow In Curved Line
Oct 9, 2011How to make custom brushes flow in a curved line. For instance I created a thorn stem brush and it works if I use it in a straight line (A) but if I curve it, it goes out of shape (B)...
View 3 Replies View RelatedCorelDRAW X4 :: CDR To Plt / Make A Curve Instead Of One Smooth Curved Line
Mar 1, 2013When I have a cdr file and need to save it as a plt file for my plotter the saved file has several little straight lines to make a curve instead of one smooth curved line. This didn't start happening until I upgraded to Corel Draw x4.
View 5 Replies View RelatedAutoCAD Inventor :: Constrain Point To Curved Line?
Nov 23, 2012I have an assembly with a curved line made in a sketch, and a part with a point in the bottom.
I want to constrain the point to the curved line, but the regular Constrain options wont let me do so.
I am making an animation with Inventor Studio, so I need this constrain, so I later on in studio can manipulate it and insert the first part into the other.