I am having a heck of a time trying to make a curved line. I have Photoshop version 8.0
Can this only be done using the Pen?
Can I use the 'line' tool and curve that line somehow?
The graphic I am trying to make is the bottom of a boat anchor.
How to create a flow arrow label for a feature line that parallels the curve?
I've a vague notion that this could be done with a dynamic block and a few fancy expressions. I'm comfortable with expressions, but I've never used dynamic blocks at all, so I wouldn't know where to start.
To be clear, I know curved text is possible, but I'm looking for a curved line (ie an arc) that would look 'parallel' to the arc of the feature line (ie have the same centre point). This would have to be dynamic to allow for different radii and for flipping to the left and right side of the feature line.
Having a time getting ribs to align 2m below top of ridge beam, and connect to curved wall below. I created one, then arrayed, but the radius changes at each 2.5 degree interval. I don't think I should have to calculate the % radius change to get the beams to do this. Some constraint button maybe?
Not sure if editing a wall profile is the best way to model this, but it's working.
I'm trying to make a site that has some nice curved lines in it with some transparent sections showing through.
I'm refering to the cool transparent sections in the image section that fade from completly transparent to opaque.
how to make curved lines like these?
how I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies View RelatedI draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
Is there a fast and simple way to make a straight path curved? I'm a FreeHand convert, and with it you could hold down the option key, click and drag the straight path (line) into a curve and control it fairly well.
View 10 Replies View RelatedIs it possible to draw a curved line, preferably with arrows at one or both ends? Lines drawn with the freeform brush are too jaggedy; I'm looking for something with intermediate handles that will make smooth curved leaders for text annotation of features in photos.
I've figured out how to make paths...what I'm trying to do is make a line that follows a path - without having the program "fill in" the path-defined region.
I am trying to assemble a roller to follow the path as shown in the attached file. I am able to make it follow one path, i.e. around the bend, but then how do I make it continue along the straight section and not continue around the circular path?
I eventually intend to use the dynamic simulator tool to animate my full model. Is there a way to use the connection parameters in this environment to enable the roller to follow the correct path.
Ho can I make a curved line like on the image but in a shape of an egg? What I mean is, line going from thick to thin.
View 3 Replies View RelatedIm trying to re-create this logo and cant figure out how to make that swoosh line thing.
View 3 Replies View RelatedI have a photograph of a female model and I need to draw lines onto the photograph to show where the waist and chest measurements would be. I guess I need a solid eliptical line which passes in front of the model and then a dotted line which shows where the ellipse would pass behind her.
View 3 Replies View RelatedIs it possible to draw a curved line. I am using the line tool but is there a way to get it to bend?
View 4 Replies View RelatedI am trying to make support ribs on a curved plastic surface to make the construction stiffer for a snow puncher.
(Just like on the attached picture, "pic 1".)
But I am having trouble doing this over the curved surface towards the top end of the rib.
As is now I sketch the shape of the rib in both ends and loft it over a sketch (see attached picture, "pic 2"), and then revolve to get the ends.
But this gives problems, result is not good and it's very time consuming.
If this was on a flat surface it would be easier, but now I get a lip along the loft and along the revolve on the top end of the rib.
I'm using Inventor Professional 2013 Student Version.
How to make custom brushes flow in a curved line. For instance I created a thorn stem brush and it works if I use it in a straight line (A) but if I curve it, it goes out of shape (B)...
View 3 Replies View RelatedWhen making a line longer with no dims on the line whats the best way to do this? Stretch command or grab one end point and type the legnth you want the line to be longer by? ie: 2" long line needs the be 2-1/2" long
I will use the stretch command without problems. 2" long line: stretch command: type .5, line is now 2-1/2" long
We have a drafter (uses 2011LT) that will grab one end point stretch the line in the direction they want the change, type the added length and the line goes to the added length..2" long line: grab right side point stretch line to right: type .5, line is now 1/2" long
They use quick properties but they don't type the change in it, they type it in the command line.
They donot stretch first they just grab the point and move to the right and type .5" and the 2" line is now .5" lone when it should be 2-1/2" long. They do not have the dynamic input on. could that be the issue? When I do the same my 2" line becomes 2-1/2" long. What would be causing the difference? This just started a few days ago after we did the update for 2011LT
At the top of the clock, how do you draw the curved lines, which say radius of 4.
[URL]........
Is it possible to array a component along a curved line?- I want to set out trees at a regular spacing along a path which has several bends in it.
View 1 Replies View RelatedI have a bench which I have drawn in CAD, and I want to calculate the area.
The bench is a sort of "S" shape.
In the past I have only calculated the areas of straight objects and so have been able to pick points, but i'm not sure how to go about it when the object includes a curve.
My question is how do I create text in a curved line? I have a circular logo which I want to have a curved line of text above and below. I can create the text OK but I can't see how to make it curved.
View 2 Replies View RelatedTry to place text on a curved line. What the easiest wat in Illustrator? Is this the best product to use?
View 1 Replies View RelatedWhen I have a cdr file and need to save it as a plt file for my plotter the saved file has several little straight lines to make a curve instead of one smooth curved line. This didn't start happening until I upgraded to Corel Draw x4.
View 5 Replies View RelatedI have an assembly with a curved line made in a sketch, and a part with a point in the bottom.
I want to constrain the point to the curved line, but the regular Constrain options wont let me do so.
I am making an animation with Inventor Studio, so I need this constrain, so I later on in studio can manipulate it and insert the first part into the other.
I have curved underbelly of a massive stair. In order to draw the the detail, I would like to pick this curved line of the underbelly to make a hatch but unable to. Is there a way around this or is this just something I have to work around?
View 1 Replies View RelatedIf there is a way to "flatten" a non curved polyline or series of lines to one straight segmented line, without altering the distances of each segment?
View 3 Replies View RelatedCreating a linear section view from a curved line
View 5 Replies View RelatedUsually, when you check the 'dashed line' option on the stroke pallete, you will instantly create a dashed-line stroke on the selected path. What I don't know how to do is retaining the straight property of a dash on curve parts of the path.
(Improvised image for illustrating my problem)
I'm having problems exporting a logo to a png or jpg the top line of curved text (MWW) keeps disappearing. It's probably really simple, but damn its annoying. File is on rapid share [URL ...
View 5 Replies View RelatedI am trying to draw a needle and thread showing a curved line as the thread with parallel lines so I can show where the thread crosses over itself. This is used as a stitching diagram.
View 3 Replies View RelatedHow do I draw a perfectly straight line...?
View 8 Replies View RelatedLast night in CS5 I was playing with the opacity and spacing of the brush, and now I can't get back to a normal brush.I want just a normal stroke, but the brush is making lots of transparent dots instead. I've switched to Photoshop Elements 7 for now and everything is fine there, it's only CS5.
View 2 Replies View Related