AutoCAD Inventor :: Making Support And Stiffening Ribs On Curved Plastic Surface?
May 22, 2013
I am trying to make support ribs on a curved plastic surface to make the construction stiffer for a snow puncher.
(Just like on the attached picture, "pic 1".)
But I am having trouble doing this over the curved surface towards the top end of the rib.
As is now I sketch the shape of the rib in both ends and loft it over a sketch (see attached picture, "pic 2"), and then revolve to get the ends.
But this gives problems, result is not good and it's very time consuming.
If this was on a flat surface it would be easier, but now I get a lip along the loft and along the revolve on the top end of the rib.
I'm using Inventor Professional 2013 Student Version.
View 1 Replies
ADVERTISEMENT
Feb 28, 2013
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
View 9 Replies
View Related
May 24, 2012
How do I draw ribs on a curved surface. Attached is model that I am working on and I need to create ribs on the curved surface in radial direction. How do I do it?
View 8 Replies
View Related
Jan 26, 2014
Having a time getting ribs to align 2m below top of ridge beam, and connect to curved wall below. I created one, then arrayed, but the radius changes at each 2.5 degree interval. I don't think I should have to calculate the % radius change to get the beams to do this. Some constraint button maybe?
Not sure if editing a wall profile is the best way to model this, but it's working.
View 4 Replies
View Related
Nov 23, 2012
Suppose we have a plastic part modeled as bent around a cylinder with an x-axis. Because the material is plastic and the manufacturing method is injection molding, part stretch is not a concern.
Suppose further that the part is a solid part that will be converted to a straight spring. The part needs to be flattened to obtain the correct spring dimensions--the part may have variable width in the x direction.
What is the best way to flatten this part?
View 8 Replies
View Related
Dec 11, 2012
The question is 'how to generate ribs out of surface, to machine from wood and assemble the skeleton for doing fiberglass'). URL....Someone generated those wooden ribs, machined it and assembled the shape to fill inside with stereofoam (say), and cover by fiberglass to generate mold.
I failed to find any kind of tutorial that answers "how generate such ribs out of a surface at hand".
View 3 Replies
View Related
Nov 25, 2011
Trying to get ribs / fins constructed along the surface of this dome - like them to be evenly spaced and follow the angled plane above. Any thoughts on best way to build this ? Repeating patern doen't work because width of fin changes for each iteration across the dome.
View 2 Replies
View Related
Aug 6, 2012
I want to extrude a big number of pillars to a rather complicated surface and that works out fine. But each end of the pillars warps around the surface and I want them just to go up to it and stop with a resulting horizontal face.
View 1 Replies
View Related
Apr 10, 2013
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
View 9 Replies
View Related
Feb 14, 2013
I am looking at building a support for a customers part. Trouble is the part is curves and surfaces. Part doesnt have too many "flat" sides to it. I am struggling with how to get what I need. In this video, I am showing how the part will move onto the support (support is clear blue).
I created an assembly, then derived the iam into a part... subtracting out where the part will sit in the support. The problem I am having is removing the material so the part can move into the support from above.
Here is a picture of the support with the part subtracted out. I would post this, but the filesize is pretty large (18mb).
I cant seem to find a way to trim this off.
View 1 Replies
View Related
Nov 7, 2009
I'm loft retarded. What I did here was loft to a tangent work plane, then did a sketch on the top surface and extruded the shape that I want. There has to be a better & easier way.
View 9 Replies
View Related
Sep 30, 2013
Basically I’m trying to create a circular cut in a flat pattern for a hole made in a rolled piece of sheet metal.
I have created a "case" (this is what we call it) to mount an axial fan, it will require holes for mounting the motor plate. When I create these holes in the rolled case assembly they appear to be fine, but when I flatten it they are turned into two sets of semi-circles or ellipses.
This is only a problem when we run the parts on our Laser; the laser will attempt to start the cutting at the end of each of these "semi-circles" causing a hotspot where the two semi circles meet. This causes the hole to be slightly smaller than intended in this area causing great difficulty inserting bolts, they normally require drilling.
Our material thicknesses vary from about 3mm to 8mm.
I’ve included a crude example of what I’m trying to achieve. To really see what I mean, place the file into a Drawing file and zoom into the hole. I couldn't add the file, with only 3 features the file was 5mb in size.
By the way, I have a temporary solution, it's just a little complicated. (My solution: use square holes first in the un-flat, use the diagonal lines from each corner of the square in a sketch on the flat pattern to place a circular cut on its mid points.)
Intel Xeon 3.0GHz (4 Cores)
nVidia Quadro 2000 (1GB) - Dual Screen
8GB RAM
View 6 Replies
View Related
Jul 8, 2013
I have tried, such as creating lines in a 3D sketch and projecting the geometry to surface, and creating a work plane, and both don't seem to work for me.... I'm trying to cut out a 5.8mmx14mm rectangle out of a cylinder. When I project the geometry to the cylinder's inner surface, I cannot trim the solid in order to extrude. I've attached the file.
View 9 Replies
View Related
Apr 27, 2012
I have a cylinder that has for lack of a better word, a zig zaged slot milled into the outside of it thru to the bore. I am unsure how to go about drawing this so I can get it to extrude correctly around the part.
From other cad software history, I could draw it on a straight plane and tell it wrap around the part of whatever diameter. But, since I have not attempted this in Inventor I don't know if this exists.
Just for reference, this is a twist lock device. Turn the cylinder, advance a key the is inside the zig zag advancing or retracting the part that is inside the bore attached to said key.
View 3 Replies
View Related
Aug 30, 2011
I am trying to assemble a roller to follow the path as shown in the attached file. I am able to make it follow one path, i.e. around the bend, but then how do I make it continue along the straight section and not continue around the circular path?
I eventually intend to use the dynamic simulator tool to animate my full model. Is there a way to use the connection parameters in this environment to enable the roller to follow the correct path.
View 9 Replies
View Related
Dec 22, 2012
I am trying to design a new mold for some sailing rudders I am building. The files I have for the current molds are in the IGS format, which Inventor can open. The current rudders are convex going from the widest part of the foil down to the trailing edge. The goal is to create another model with this flattened. If I were doing this in logic it would be: Find max height, alter foil to be straight from max height to trailing edge. I have tried everything I can do to make this happen with no avail. what would be optimal is if I could get it set up so that I can easily control the amount of convexness to the aft section, but the primary goal is to just get it to be straight. The trailing edge is the straighter one.
The final goal is to export to g-code and send off to a cnc.
I have attached the files after I have imported them into autodesk, but below is a link to the original iges files.
[URL]
View 9 Replies
View Related
Oct 29, 2012
I am trying to create a simple hole with threads for a set screw on a hub. I cannot figure out how to select the tangent plane I need to create the sketch. I'm using Inventor 2013 and have attached the file below.
View 9 Replies
View Related
Oct 2, 2012
I'm designing a part, and am having trouble creating a plane tangent to a curved surface. One option for creating a plane says "Tangent to Surface through Point", which in theory I should be able to use, but I can't figure out how to actually place a point there before in order to create a surface at the point.
Basically I am trying to cut a circle into the curved right side of the part
I've attached the part file for reference.
View 5 Replies
View Related
Mar 23, 2012
I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.
View 1 Replies
View Related
Aug 16, 2012
I've read the posts pertaining to coil features along curved paths. The existing solutions are limited in that they must rely on a solid with the addition of a bend feature. How can I create a helical surface structure including multiple bends like the one shown?
View 2 Replies
View Related
Aug 16, 2012
In inventor 2013, how do I engrave and wrap some text onto a surface that is neither on a cylinder, a cone, or a sphere? I created the part by first drawing a cross section made up with the spline tool, then revolved it around an axis. I need to imprint two words on the part's curved surface. I sketched the words, then I tried using the emboss/engrave wrap feature, but I got an error message saying that emboss/engrave wrap can only be done on standard surfaces such as cylinders, cones, or spheres. How to engrave words on surfaces other than these standard surfaces? I also tried to extrude cut the words onto the surface, but the words don't wrap to the surface, and are not evenly imprinted onto it.
Also how do i make the letter's bigger when I sketch them? even though I put in large numbers such as 50 in the size box, the text does not appear big. Also, how do I increase the spacing between the letters?
View 4 Replies
View Related
Jul 20, 2012
I need to apply a knurled texture to an organic curved surface. It cannot be a decal, this is to be rapid prototyped so the knurl must be real 3d. I have an imported Solidworks file that shows exactly what I need. I do not have access to the author of the Solidworks part so I don't know how they did it. Its part of a pistol grip handle.
Keep in mind that emboss does not support organic surfaces, only cylindrical or planar.
View 9 Replies
View Related
Nov 20, 2013
I am drawing a fan wheel. The fan blade is curved intersects the shroud, consisting of two cones. I do not know how to trim the blade to the cones. I tried to "split" the blade at the cones and then "delete face" but then the "Go to flat pattern" section on the ribbon is missing. If I suppress the "delete face" feature the "Go to flat pattern" re-appears.
View 1 Replies
View Related
Sep 2, 2013
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies
View Related
Oct 19, 2011
If you look in the attached PDF, I have an elliptical wall that also has changes in elevation. call it a compound radius if you will. What I have to do is to make a wall cap to go on top of the wall. I know, sounds fun.....I have the surface on the right of the PDF and i need to figure out how i can take that shape and have it lay flat so that i can cut this shape out on my CNC. i know I can use the FLATSHOT command, but this will not give me the true shape of the board.
View 4 Replies
View Related
Aug 1, 2007
Just wanting to know opinions, for sectioning of views, typically ribs & webs are not sectioned, so extra work is involved in creating views to meet NZ & Australian standards, is it feasible for Autodesk to have it so that if a rib feature is created in a model, this is not sectioned in a section view of a part (much like parts can be turned off for sectioning in an assy view)
View 9 Replies
View Related
Feb 4, 2013
I am designing perfume bottles and for that i need to to repeat a semi circle to repeat over a curved surface fo the bottle. To simplify the problem i have created curved surface and made a semi cirle as a feature, now i want the feature to repeat on the curved surface. I have tried to rectangle pattern, aswell as the circular pattern in all possible ways i can think.
P.s. I have hp I7 processor, 8 gb ram, windows 7 and am using autodesk inventor pro 2013
View 4 Replies
View Related
Sep 9, 2013
I keep running into a situation where I would like to be able to create an edge or a work axis at the intersection of a work plane and the surface of the part. I figured out a work around if the surface is flat, but I haven't figured out a work around for a curved surface.
How do I create work axis where work plane intersects curved surface?
Or put another way: How do I project intersection of work plane and curved surface onto the work plane in a 2D sketch?
I need to be able to draw a 2D sketch on the work plane, but get a perfectly matching projected line onto the work plane, from the curved surface, at the intersection of the curved surface and the work plane.
The attached jpg shows the intersection in question. I circled it.
View 5 Replies
View Related
Sep 18, 2013
How do you most easily do a sheet metal plate that needs to follow a surface?
L1 is less than L2, and a radius of the plate?
In Inventor 2012
View 3 Replies
View Related
Nov 27, 2013
So I need a starting point on how to draw on a curved surface.
[URL]
how to draw the "slot" I know in solid works i can "project" onto the surface and then so a cut.
View 9 Replies
View Related
Jun 13, 2011
I have a curved surface and I don't know a right way to export it. If it like Editable Poly then I have a mesh in DWG. Then I set to Faceted and optimized then merge faces (to receive one face) and then convert to surface but after that I have a surface with multiple triangles. This is one way which I use, I tried many ways but I have the same results.
This is what I have after export from 3DS MAX (same as DWG, SAT, IGS)
02_old.jpg
This is what I receive from splines and loft in AUTOCAD.
02_new.jpg
View 5 Replies
View Related
