Lightroom :: Printing Adds Green Line To Top Of Picture?
Dec 23, 2011
Starting this week, when I print my note cards from LR, the greenish line (aproximately 1/8") is added to the top of every photo. It's not noticable if I do draft mode printing. Also, if I print to jpeg file, then print this file outside LR, it's not there. I blamed it on 3.6 upgrade first, rolled back to 3.5, but it haven't solved the problem. I'm on Windows 7 and HP Photosmart Premium C309a printer. I really need to print lots of cards and I cannot!
Addition on 12/17/11 - the line is not noticable on black or any darker color.
View 1 Replies
ADVERTISEMENT
Apr 13, 2013
I upgraded to win 8 64 bit and neither Canon nor Ilford have updated their software but I dont know whether that is causing red/orange to be printed as green.
View 1 Replies
View Related
Dec 5, 2012
The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies
View Related
Nov 17, 2013
how I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies
View Related
Nov 5, 2008
I am running windows xp and photoshop cs. I save my work as a JPG and haven't had any printing problems until now. When I print now it prints a solid green sheet. I can see the work I did under the green,
View 2 Replies
View Related
Jul 3, 2012
I used to use HP photosmart c4480 to print film for own screen printing job. I use coreldraw to print back colour logo and use special photo paper and max dpi to print and got a good printing on back colour.
But after I moved to new factory, the printing change to all green colour. I thought may be the ink problem, then I change the new ink but can't fix it. I try to use the other printer but same.
I use same printer and photoshop to print some photo is OK.
View 7 Replies
View Related
May 4, 2009
Have just switched from Mac G4 OS 10.4 to IMac G5 OS 10.5.1 printing with Epson Stylus Photo R285. Apart from this change am still using the same Photoshop CS2 and printer set-up.
Now printer is putting green tint in shadow area and Red is printing almost black see examples.
Have spoken to Epson who reckon I have the right driver and the printer is fine.
Epson suggest Photoshop needs to be Set-up properly.
Not sure what this means exactly anyone got any ideas?
View 1 Replies
View Related
Sep 19, 2012
I am using pse10 with an epson workforce 60 printer and everything prints out with a green tinge through it. Also the print is nothing like what is on my screen. I am using a Visi-sub icc profile for sublimation printing.
View 2 Replies
View Related
Jan 21, 2014
On import lightroom 5.3 still does not recognize previous imports of the same file name. I have the "do not import suspected" checked, but LR5 does not exclude the old files. Import has Copy, New Photos and Do not import suspected duplicates checked. No problem with LR4.4 on imports
View 7 Replies
View Related
Aug 8, 2009
I am getting photos ready to be used in a Premeire Pro video. I was given these photo by someone who scanned them. There is a fine green line running through some of them. I have tried removing it with the clone and the healing tools but they don't work on it (they DO work on the rest of the photo). I cannot figure out how to get rid of this line. There are no layers to flatten. Any help would be appreciated. I have never seen this before.
View 2 Replies
View Related
May 21, 2012
All of a sudden when i create a circle on the origin it is not turning green and constraining the circle to it. Also when i am creating a line from the midpoint of another line the midpoint is not turning green and the line is not constrained to that point. I have checked the autoproject origin box in the appl settings and it is active.
View 8 Replies
View Related
Oct 25, 2012
I am new to Photoshop (Elements Vers 10).
Today I have been working on a photo (cloning out the background) and after about 4hrs work a thin green line about 1-2 pixel thick, has appeared across the center of the page. How it got there but I can not remove it.
I have tried saving the project (as a photoshop file) and then opening it as a new project in an old version of Photoshop (Vers 3 ?) to see if I could clone out the line, but it will not permit me to clone it.
What the line is, what I did to cause it to appear and how do I get rid of it. I possibly could export the project as a JPG and start as a new project.
View 5 Replies
View Related
Apr 19, 2011
I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies
View Related
Mar 29, 2013
I'm looking for a way to copy a text or a simple line, circle... ; after I copied it, the last entity change its color to green.
View 3 Replies
View Related
Aug 31, 2012
I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
View 2 Replies
View Related
Oct 30, 2012
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies
View Related
Feb 26, 2008
I have a picture that is 21x32cm in 300ppi. I want to print it to 50x70cm in digital printer.
I need to enlarge it to fit, right? What are the settings I should use in the image size dialog box?
Should it remain 300ppi or perhaps 600 ppi?
Should I resample pixels or not?
View 5 Replies
View Related
Apr 22, 2008
I have Adobe Photoshop 7.0 and an Epson Stylus Pro 9800 Printer. I need to be able to print 2 prints (16 x 20in each) on the 44" wide canvas.
View 7 Replies
View Related
Dec 13, 2012
I am trying to print a sunset with cacti and I get a very very green cast on epson r2000. I only get it on the printout and not on the screen. I have the print color management for the right paper etc. ICM is on . I have tried epson vivid and epson rgb, same green unuseable cast. Perceptual vs relative doesn't work. I am new to lightroom. Got it mainly for softproofing and raw processing. OS is windows vista 32 bit I do not get this in pse 11.
View 2 Replies
View Related
Aug 17, 2011
I opened a .pdf with an image in the middle that I need to print (house plot map). I then cropped that image from the center so I could get it a bit bigger. The first print was almost perfect, but it lost a bit on two corners. I didn't change any settings and now it's only printing one corner of the image on a full page...really big!
I just need the image to scale to the page. Of course I've selected scale to fit media on the print page. It shows the image on the left of the print page and it looks perfect. Using Photoshop CS3 on Win 7.
View 6 Replies
View Related
Sep 7, 2011
I have Paint Shop Pro PHOTO XI. I want to shrink a photograph so when it's printed on a standard 6x4 print the picture only takes up a part of the print. Is this possible? If so, how do I go about it?
View 4 Replies
View Related
Jul 1, 2004
How can I print 1 picture on multiple pages. In Coreldraw 11, they have a printing option called "Mosaic printing".
View 2 Replies
View Related
Aug 5, 2002
I clicked on filter and then I clicked on the sharpen but I'm kind of confused about the sharpen. Whic sharpen tool do you use to sharp before printing the picture out?
and then I marked the ruler from the view but I see the extra on so turned it off but every time I would see the extra is on. How do I turn the extra off forever?
View 2 Replies
View Related
Apr 26, 2009
Is there a correct way to size pictures for printing. This is what I have done.My camera is set of 6 meg’s which gives me a huge original. I want to take this and print on a 4x6.I bring up the picture, select print > click on “scale to fit media. This gives me the size of5.333 X 4. I go back to the picture select: Image>Image Size. Under Document size I enter 5.333 in the Width.
View 5 Replies
View Related
Oct 13, 2012
Brand new GIMP user. I have been able to layer my pictures to create the effect I want. My problem is PRINTING. I can print but it is only printing half of the picture. Trying to print 4x6. If I flip the setup on my printer to landscape it only shows the bottom of the picture and it is not centered, the right size, and is on the top middle of my 4x6 photo paper. If I leave at portrait, it only hows the right side of the picture and, again, is the worng size and on the left side of the photo paper. Obviously I am missing something very basic?
View 1 Replies
View Related
Nov 3, 2012
I have had Lightroom for a bout a month and use my QNAP NAS to store images. This has always been ok until today.Today the light next the QNAP directory in the 'folders' dropdown of LR4 shows yellow rather than green. If I set folder status to display it says it's online and I can access the images fine.
The problem is that I have a custom renaming preset which takes the folder name and makes it part of the file name. While the light is showing yellow it no longer picks up the folder name (but will remane the file according to other presets such as date). It's really odd because the black bar just above the filmstrip tells me the name of the folder correctly so I don't know why the rename won't show it. I know the preset works correctly because 1) I have always used it before on this NAS and 2) it works fine for files on my mac HDD (which shows a green light status).
View 7 Replies
View Related
Oct 11, 2012
When I send a photo to the printer, only part of the photo is printed.
View 2 Replies
View Related
Aug 28, 2013
My PSE 5 lets me print an 8 X 10 photo with choice of borders using the "print multiple photos" feature. Will either of these newer PSE versions also print an 8 X 10 as well? I downloaded the PSE 11 trial version, which seemed to allow only up to 5 X 7 prints.
View 4 Replies
View Related
Jul 22, 2013
What is the keyboard shortcut for going from picture to picture in Develop module?
View 2 Replies
View Related
Dec 13, 2004
How can I automatically add different pictures in a single canvas using Picture package? i.e. I have about 48 pictures and I want to place 4 different pictures to each [10 X 8 - "4(4X5)"] canvas so that I can send all 48 pictures for printing at a digital studio. When I try, multiple copies of single picture appear on each canvas. I tried 'contact sheet' but not satisfied with the result as I could not change the length and width of the pictures.
View 2 Replies
View Related
May 21, 2012
How to unite the red and green parts of the leaf into one solid green leaf? See attached “Leaf” file. (How do I attach the AI file?)
I tried the Pathfinder UNITE command and the Live Paint MERGE command.
View 29 Replies
View Related
