CorelDRAW X3 :: Printing On HP Photosmart - All Green Print
Jul 3, 2012
I used to use HP photosmart c4480 to print film for own screen printing job. I use coreldraw to print back colour logo and use special photo paper and max dpi to print and got a good printing on back colour.
But after I moved to new factory, the printing change to all green colour. I thought may be the ink problem, then I change the new ink but can't fix it. I try to use the other printer but same.
I use same printer and photoshop to print some photo is OK.
View 7 Replies
ADVERTISEMENT
Jan 22, 2013
I'm having problems with printing documents in color using the Corel Draw X6 (Windows 7). My printer is an HP Photosmart 8200 Series and I'm using the most recent driver from HP. I've made sure that the color is turned on (i.e. grayscale is turned off).
When I go the print dialog and the preview I only see black and white (and get no colors when proceeding with printing). For some strange reason I don't get a 'color' tab in the print dialog (where I could check whether grayscale/black&white printing is turned on).
But when I use a different printer driver (e.g. Windows XPS) then suddenly I see the correct preview with color. So somehow this is linked to the HP printer driver.
View 2 Replies
View Related
Sep 1, 2012
I recently replaced my hard drive and upgraded to Mountain Lion. Now Photoshop crashes every time I try to print to my HP Photosmart Premium printer.
View 1 Replies
View Related
Feb 22, 2014
I am unable to make the Lr 5 to print on my HP photosmart C309a. Previously I had Lr 5 running on my PC with Windows 7 and I was able to use the same HP printer to print both from the main tray and photo tray. Now I cannot get any photos from Lr printed, while the printer does print a test page ok from Device Manager.
View 4 Replies
View Related
Jun 2, 2008
So, about 3 weeks ago, I discovered this plug-in and really enjoyed it:
Automate--->Photosmart Pro print
Well, this week I must have done something, and I need to figure out how to fix it. I've tried uninstalling and reinstalling everything but Photoshop (CS), and spent the entire day talking to HP tech support. No one can figure it out. So hopefully, one of you experienced my problem and know how to fix it. Code:
View 1 Replies
View Related
Jul 19, 2013
Why can't I set the print quality to best on HP Photosmart 7520 with either PSE 8 or 11. I can with Lightroom 4.
View 1 Replies
View Related
Mar 3, 2013
I can't print to the phototray in LR4 with HP photosmart 7520
View 7 Replies
View Related
Nov 30, 2012
Since recent upgrade to win 8 from 7 HP printer will not accurately print from Photosmart 7.0.1
View 2 Replies
View Related
Apr 4, 2011
I was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
View 14 Replies
View Related
Mar 4, 2013
when i'm going to print may files with 36 layers, corel x5 will close and nothing happen in printing.
note: the file is edited in corel x3 but the printing will done in x5.
View 2 Replies
View Related
Nov 23, 2012
Whenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
View 4 Replies
View Related
Jun 23, 2012
I am trying to print film for screen printing using an epson 1100 workforce. I am not able to select the 'advance setting' box under the separations tab when I try to print separations. I am trying to be able to choose the dot
View 1 Replies
View Related
Apr 10, 2009
OS WinXP and Win Vista 64 bit.
To print business cards, I selected Label AVERY 5371 - 2X 3.5 BusCr. Print preview looks good. There is no any visible alignment problems.
When printing is completed (Linen paper AVERY 5371), there is about 2 millimeters alignment problem for each card. I created my own template and the print is with the same results. The printer I use is Canon MP830 ink jet.
View 7 Replies
View Related
Nov 5, 2008
I am running windows xp and photoshop cs. I save my work as a JPG and haven't had any printing problems until now. When I print now it prints a solid green sheet. I can see the work I did under the green,
View 2 Replies
View Related
May 4, 2009
Have just switched from Mac G4 OS 10.4 to IMac G5 OS 10.5.1 printing with Epson Stylus Photo R285. Apart from this change am still using the same Photoshop CS2 and printer set-up.
Now printer is putting green tint in shadow area and Red is printing almost black — see examples.
Have spoken to Epson who reckon I have the right driver and the printer is fine.
Epson suggest Photoshop needs to be Set-up properly.
Not sure what this means exactly — anyone got any ideas?
View 1 Replies
View Related
Dec 23, 2011
Starting this week, when I print my note cards from LR, the greenish line (aproximately 1/8") is added to the top of every photo. It's not noticable if I do draft mode printing. Also, if I print to jpeg file, then print this file outside LR, it's not there. I blamed it on 3.6 upgrade first, rolled back to 3.5, but it haven't solved the problem. I'm on Windows 7 and HP Photosmart Premium C309a printer. I really need to print lots of cards and I cannot!
Â
Addition on 12/17/11 - the line is not noticable on black or any darker color.
View 1 Replies
View Related
Apr 13, 2013
I upgraded to win 8 64 bit and neither Canon nor Ilford have updated their software but I dont know whether that is causing red/orange to be printed as green.
View 1 Replies
View Related
Sep 19, 2012
I am using pse10 with an epson workforce 60 printer and everything prints out with a green tinge through it. Also the print is nothing like what is on my screen. I am using a Visi-sub icc profile for sublimation printing.
View 2 Replies
View Related
Oct 16, 2013
I have AutoCAD LT 2014 and i have a drawing that i attached a picture to and have a few hatches over. When i go to PDF it and print the drawing it has green lines throughout and not just on the part of the attachment but over the entire page. How do i get rid of these? I dont see them in AutoCAD
View 9 Replies
View Related
Dec 13, 2012
I am trying to print a sunset with cacti and I get a very very green cast on epson r2000.  I only get it on the printout and not on the screen. I have the print color management for the right paper etc. ICM is on . I have tried epson vivid and epson rgb, same green unuseable cast. Perceptual vs relative doesn't work. I am new to lightroom. Got it mainly for softproofing and raw processing. OS is windows vista 32 bit I do not get this in pse 11.
View 2 Replies
View Related
Jan 12, 2011
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
View 2 Replies
View Related
Jun 27, 2013
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
View 13 Replies
View Related
Feb 28, 2014
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies
View Related
Oct 15, 2013
My epson R1900 printer will not print the color green- all inks are full
View 3 Replies
View Related
Aug 29, 2012
i always use corel for designing an advertorial matter, but there's always something that bothering me when i get the print results.. why does the colors especially blue and green always looks so dark, infact, Â they became brown and purple..
View 1 Replies
View Related
Aug 31, 2012
I've attached a leaf image. We'd like to "Autumnize" the leaf even more and remove the green from the leaf. I've tried playing with the various options in the Color drop down (Color Balance, Hue Saturation, Colorize, Brightness-Contrast, Threshold, Levels, Curves), but I can't seem to do it.
View 2 Replies
View Related
Nov 25, 2012
I scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies
View Related
Apr 4, 2012
I recently switched to coreldraw x5. is there a way to change default guidelines color. and this setting should remain forever. Â
one more thing i want the green processing filling, which is now present in the background tasks to be visible. ...just like in older versions how can i do it?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 12 Replies
View Related
Sep 13, 2011
I have created a drop shadow on a green background.
Shadow Black value being C - 0Â Â M - 0Â Â Y - 0Â Â K -100.
In the file and the hard print the shadow comes out as a reddish color. How do I get the shadow Black?
View 2 Replies
View Related
Nov 17, 2006
I'm having trouble printing an image that's longer than 11 inches. I have a Canon i560 printer, and use either PS 7 or PS CS.
I want to print an image that's 6 x 16 inches, using 13x19" paper that I've cut in half the long way. I specified Custom (for size), and got approximately the correct width, but it stops printing after 11 inches. I also tried printing a JPG version of the image using WindowsXP print utility, and it allowed me to specify a custom size, but it also stops printing after 11 inches in length.
View 2 Replies
View Related
Oct 30, 2012
When printing to PDF via the DWG to PDF.pc3, I am getting a blank PDF. When i hit preview everything shows fine, but when I print it all disappears. The layers list shows in the PDF on the right, but turning them on and off does nothing.
View 3 Replies
View Related
