So, about 3 weeks ago, I discovered this plug-in and really enjoyed it:
Automate--->Photosmart Pro print
Well, this week I must have done something, and I need to figure out how to fix it. I've tried uninstalling and reinstalling everything but Photoshop (CS), and spent the entire day talking to HP tech support. No one can figure it out. So hopefully, one of you experienced my problem and know how to fix it. Code:
Why can't I set the print quality to best on HP Photosmart 7520 with either PSE 8 or 11. I can with Lightroom 4.
View 1 Replies View RelatedSince recent upgrade to win 8 from 7 HP printer will not accurately print from Photosmart 7.0.1
View 2 Replies View RelatedI used to use HP photosmart c4480 to print film for own screen printing job. I use coreldraw to print back colour logo and use special photo paper and max dpi to print and got a good printing on back colour.
But after I moved to new factory, the printing change to all green colour. I thought may be the ink problem, then I change the new ink but can't fix it. I try to use the other printer but same.
I use same printer and photoshop to print some photo is OK.
I can't print to the phototray in LR4 with HP photosmart 7520
View 7 Replies View RelatedI recently replaced my hard drive and upgraded to Mountain Lion. Now Photoshop crashes every time I try to print to my HP Photosmart Premium printer.
View 1 Replies View RelatedI am printing out several images for relatives in 4x6 size. The prints are only half height (landscape mode).Using Photoshop Elements works okay.I normally print on an Epson r1900 and everything there prints out well.Either automatic or setting to dimensions in the print menu makes no difference.Image size reports correctly.
View 7 Replies View RelatedHow do I get a verification number in order to "SHARE" my pictures on Photosmart??
View 1 Replies View RelatedThe colors on the computer monitor do not match the colors of my printed photos. The pictures have a yellow color cast. I am printing using HP Photosmart 7520.
View 1 Replies View RelatedOK. So how do I print a 4x6 borderless print on my new 7510 Photosmart? My only options seem to be a 4x6 tab print. What gives?
View 7 Replies View Related When I try to print from lightroom the above image is what I get. If I print via the HP desktop gadget the print is good and colors are fine. The scan of the image has brightened it up a bit.II have a Acer Aspire X3950 PC running windows 7 Home Premium (64 bit). The printer is a HP Photosmart Premium C310a. I Color profile is managed by printer.
View 1 Replies View RelatedI am unable to make the Lr 5 to print on my HP photosmart C309a. Previously I had Lr 5 running on my PC with Windows 7 and I was able to use the same HP printer to print both from the main tray and photo tray. Now I cannot get any photos from Lr printed, while the printer does print a test page ok from Device Manager.
View 4 Replies View RelatedI'm having problems with printing documents in color using the Corel Draw X6 (Windows 7). My printer is an HP Photosmart 8200 Series and I'm using the most recent driver from HP. I've made sure that the color is turned on (i.e. grayscale is turned off).
When I go the print dialog and the preview I only see black and white (and get no colors when proceeding with printing). For some strange reason I don't get a 'color' tab in the print dialog (where I could check whether grayscale/black&white printing is turned on).
But when I use a different printer driver (e.g. Windows XPS) then suddenly I see the correct preview with color. So somehow this is linked to the HP printer driver.
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
Â
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
Â
A couple things I noticed: In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).Â
-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies View RelatedI have trial version of Elements 11; Also have full version, but have not installed yet, as I wanted to wait until I completed current project. I created/edited an album of wedding photos in the Organizer. I tried to upload album to Shutterfly to make an archival DVD and also make a photo book in Shutterfly. The photos uploaded individually to the Shutterfly print page to print individually, but the album will not upload to My Pictures, it shows the album name, but it is empty. How do I get the photos to upload?? Shutterfly was not sure how.
View 1 Replies View RelatedUsing a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies View RelatedI use CS6 on a Mac pro os 10.8.3 & print to an Epson Pro 4900. If I print an image via LR4 print module the print comes out at 12 X18 in. Recently I have tried that same image via CS6 and the print comes out at 6 5/8 X 8 1/2 in.
Â
In Print Settings in Printer Setup in the print module of CS6Â stats "Super A3 / B 13 X 19 but the printed image dimensions are a little over half of that.The printer used to print normally in CS6 print file.
I've been using Photoshop CS3 for awhile and printing fine. I just updated my print driver (Epson 3800 to version 6.5) as well as my graphics driver (NVIDIA GeForce 8500 GT)at the same time. After rebooting I cannot click on the Print menu selection to print. IE: When I click on Menu the Print option is greyed and not selectable. Print as well as Page Setup, and Print One Copy are all greyed out (not selectable). I rolled back my graphic driver and rebooted and it still doesn't work. I then upgraded my driver again and it doesn't work. I've opened jpg's as well as psd files and no matter what file I open the Print menu's are greyed out. I can print from Word and other programs. I also reset my preferences (con-alt-shift) and still can't select print. I've done everything but uninstall. I'm hoping not to do that. My computer is on: Vista Ultimate 32 bit SP1, 4gb ram. In addition to updating the print driver and graphics driver I updated: Ultimate Extra Sounds, Group Policy Preference Client Side Extensions, Samsung CLP-310 Printer driver, and Microsoft Tinker.
View 4 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI have a number of maps in .tiff format. I want to cut parts of these maps and paste into seperate documents. That is fine. I then want to blow them up to A4 size for print. I am slightly confused on how to do this for the following reasons: Under the "image" menu item, I can see "pixel dimensions" and below this "document size".I can also set the canvas size. I am not sure if "document" and "canvas" size are the same? Could somebody please advise me. Basically, I want to enlarge my tiffs to fill a European A4 size page. GF
View 2 Replies View RelatedI get an error saying I need to install a printer ... but CS2 works fine. What do I need to do?
Windows XP, Konica Minolta C253
When printing in 3d with the vp set to 3dhidden and the shade plot set to hidden legacy some solid items print with the wire frame. This usualy happens with torus and cones. How do I stop this?
In the example look at the U-bolt.
I am having trouble printing to an HPÂ Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies View RelatedI have a drawing where some lines have a 60% screening in there Plot Style. Â The print great from AutoCAD. Â But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.
I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X. Â I'm creating the PDF from AutoCAD 2012.