I clicked on filter and then I clicked on the sharpen but I'm kind of confused about the sharpen. Whic sharpen tool do you use to sharp before printing the picture out?
and then I marked the ruler from the view but I see the extra on so turned it off but every time I would see the extra is on. How do I turn the extra off forever?
way to take a photo and sharpen the image.
We took a picture of my daughter when she was 2 that is just prescious. However it was taken on a film roll before we got a digital camera. The resolution is bad but my wife wants to use it in a scrapbook.
I have it in jpeg format now and was wondering if Photoshop can take a bad picture and make it cleaner and clearer?
I'm trying to print the presidential medal of freedom in high-res but all the samples I found on Google image search and on wiki are low-res. Since I need it for print, I increased it to 300dpi and it looks really jagged and blurred. I tried to search for a vector version, but couldn't find it. This is how it looks:
I tried all the filters as well, but couldn't find one that suits me (cutout is the closest, but it still looks horrible). I'm using Photoshop CS5.
Except finding an original high-res (which is impossible right now), in which other creative way can I fix it?
I took this pic and I thought I would be able to enlarge and sharpen it so the writing would be readable, but so far I've had no luck.
Is there a way to do this?
Attached Thumbnails
Downloaded the 30 day trial yesterday. In particular I've just spent the last 30 mins looking for the sharpen tool (help document says it should be there; blue triangle) to take the fuzz of the edge of something I've cut out. if "9" does it another way, how to clean edges of cut-outs?
View 2 Replies View RelatedThe smart sharpen tool in Photoshop CS6 takes up to 2 minutes to apply, during wich time nothing else can be used...is that normal? It was a breeze to use on the same computer with CS5 Every thing else works really well
Edit:
The problem seems to affect the 64 Bit version only, the 32 Bit works fine...my OS is 64 Bit...
Edit:
if I change the bit-depth to 8 bit it works ok, the problem is when I open a 12 bit file...
What is the difference between sharpen and sharpen copy in the presets section of LR? they seem to have the same effect, dont know which one to use
View 2 Replies View RelatedI'm not satisfied with the huge quality loss after scaling the layers and sharpening them. What to do so it will look less crappy? What should I do? Also I want to mention that I'm doing gifs from videos using KMPlayer to extract the frames and the videos are in mp4 format and HD quality.
View 3 Replies View RelatedIn ps7 editor I can have 2 pictures cascaded and using the marquee tool and the move tool insert a section of one picture into the other. I cannot do this in ps11, what am I doing wrong?
View 3 Replies View RelatedI have a picture that is 21x32cm in 300ppi. I want to print it to 50x70cm in digital printer.
I need to enlarge it to fit, right? What are the settings I should use in the image size dialog box?
Should it remain 300ppi or perhaps 600 ppi?
Should I resample pixels or not?
I have Adobe Photoshop 7.0 and an Epson Stylus Pro 9800 Printer. I need to be able to print 2 prints (16 x 20in each) on the 44" wide canvas.
View 7 Replies View RelatedI opened a .pdf with an image in the middle that I need to print (house plot map). I then cropped that image from the center so I could get it a bit bigger. The first print was almost perfect, but it lost a bit on two corners. I didn't change any settings and now it's only printing one corner of the image on a full page...really big!
I just need the image to scale to the page. Of course I've selected scale to fit media on the print page. It shows the image on the left of the print page and it looks perfect. Using Photoshop CS3 on Win 7.
How can I print 1 picture on multiple pages. In Coreldraw 11, they have a printing option called "Mosaic printing".
View 2 Replies View RelatedIs there a correct way to size pictures for printing. This is what I have done.My camera is set of 6 meg’s which gives me a huge original. I want to take this and print on a 4x6.I bring up the picture, select print > click on “scale to fit media. This gives me the size of5.333 X 4. I go back to the picture select: Image>Image Size. Under Document size I enter 5.333 in the Width.
View 5 Replies View RelatedWhen I send a photo to the printer, only part of the photo is printed.
View 2 Replies View RelatedMy PSE 5 lets me print an 8 X 10 photo with choice of borders using the "print multiple photos" feature. Will either of these newer PSE versions also print an 8 X 10 as well? I downloaded the PSE 11 trial version, which seemed to allow only up to 5 X 7 prints.
View 4 Replies View RelatedHow can I automatically add different pictures in a single canvas using Picture package? i.e. I have about 48 pictures and I want to place 4 different pictures to each [10 X 8 - "4(4X5)"] canvas so that I can send all 48 pictures for printing at a digital studio. When I try, multiple copies of single picture appear on each canvas. I tried 'contact sheet' but not satisfied with the result as I could not change the length and width of the pictures.
View 2 Replies View RelatedI am trying to build custom layouts for printing picture packages, but cannot find out how to get to the layout dialog box or the edit layout dialog box so that I can build and save custom layouts. How do I get to the point where these boxes appear? I've tried it from both Organizer and Editor, but not joy at all.
View 1 Replies View RelatedI have Paint Shop Pro PHOTO XI. I want to shrink a photograph so when it's printed on a standard 6x4 print the picture only takes up a part of the print. Is this possible? If so, how do I go about it?
View 4 Replies View RelatedBrand new GIMP user. I have been able to layer my pictures to create the effect I want. My problem is PRINTING. I can print but it is only printing half of the picture. Trying to print 4x6. If I flip the setup on my printer to landscape it only shows the bottom of the picture and it is not centered, the right size, and is on the top middle of my 4x6 photo paper. If I leave at portrait, it only hows the right side of the picture and, again, is the worng size and on the left side of the photo paper. Obviously I am missing something very basic?
View 1 Replies View RelatedStarting this week, when I print my note cards from LR, the greenish line (aproximately 1/8") is added to the top of every photo. It's not noticable if I do draft mode printing. Also, if I print to jpeg file, then print this file outside LR, it's not there. I blamed it on 3.6 upgrade first, rolled back to 3.5, but it haven't solved the problem. I'm on Windows 7 and HP Photosmart Premium C309a printer. I really need to print lots of cards and I cannot!
Addition on 12/17/11 - the line is not noticable on black or any darker color.
still new to photoshop and im making a banner but i need help with the pen tool. After i i finished outlining it with the pen tool, how do i cut the picture? Cause when i cut the picture and put it in another background all i get is the outline of the picture and not the actual picture of the person.
View 1 Replies View RelatedWhich tool is very friendly for pic cleaning in Photoshop.
View 7 Replies View RelatedI cannot get the tools option to be available in Adobe Photoshop 11. I can see the selection tool that lets you outline a person or thing but cannot get to the selection tool that allows you to select a total picture from a scanned page with multiple photos on it. I would like to have this selection tool appear on the left side of the screen as I use it so much. how to get it there and most important - get it to stay there?
View 2 Replies View RelatedI re-installed photoshop cc,i updated every drives...
View 1 Replies View RelatedSuddenly when I click on the CS6 clone stamp tool and then ALT Click to select an area to use as the clone are, it duplicates the whole picture. The only way I can get out of the whole picture cloning is to close the file. what has happened and how to fix it?
View 2 Replies View RelatedWhen I use horizontal type tool whole picture becomes black. I re-installed photoshop cc,idk what should i do...
View 2 Replies View RelatedI am trying to take a image from one picture to move to another picture using the lasso tool I keep trying to use the lasso tool and when I'm done it automatically resizes its self to a size I don't want. How do I get it to stay the size I put it at. My goal is to fade the edges and then slide it over to another picture but the whole picture slides over instead of the lasso section.
View 3 Replies View RelatedAdobe Photoshop Elements 10 for MAC.
When I select content using the crop tool then hit enter (or the green checkmark) the picture just disappears. This happened all of a sudden a few days ago. I can do COMMAND Z to undo and the picture reappears. But every time I crop the picture disappears and the layer thumbnail just turns brown.
whenever i open a document using the magic wand tool the picture in the document keeps flashing black - CS6
View 4 Replies View RelatedEvery time I try to use the magic wand tool to erase things from a picture the program says there is a problem either look online for a solution or close the program and I choose to look online but it just closes the program down completely. I had not been having any trouble at all and it just immediately started doing this and I had been using the very same tools as I am trying to use now. I am extremely frustrated and I even deactivated the program, uninstalled it, and then reinstalled thinking this would fix it.
View 3 Replies View Related