All of a sudden when i create a circle on the origin it is not turning green and constraining the circle to it. Also when i am creating a line from the midpoint of another line the midpoint is not turning green and the line is not constrained to that point. I have checked the autoproject origin box in the appl settings and it is active.
View 8 RepliesWhen I draw a line at the origin, it does not find the origin and snap to it, or auto apply the horizontal constraint when near horizontal. Or if I draw an L the lines are not connected. That is, I can pull one line away from the other. I can not find the settingsto correct this behavior. What's up?
View 2 Replies View RelatedI'm wondering if there is a way to annotate from the origin without having a long diminsion line to the center. (see image) I want it like the 'linear diameter' but not with double my size. I always have to annotate the projection from center and this would be easy much more easy to do.
View 1 Replies View RelatedI cannot select origin to constrain sketch with dimension to origin?
I selected Sketch,
expanded origin,
selected mywork plan (xy)
drew rectangle,
input dims,
right click for marking menu,
selected dimensions,
Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies View RelatedIn drawings there are a lot of times where I turn off the visibility of certain line segments to make the view look cleaner.
What if I was to reverse the visibility of these lines segments down the road?
My PhotoShop is turning certain shades of green to black, when I click on the image and move it I can see it perfectly while it move...But, after that goes to black as seen above.
View 2 Replies View RelatedI have already turned the sky blue with some clouds but now I would like to make the dead grass green. The image is ultimately going to be turned into a painting using photoshop but I want the image exactly the way I want it before I convert it.
View 2 Replies View RelatedI am having issues when Uploading photos to my website,dropbox,email or online lab after editing in photoshop , First I edit in LR5 then export to PS with Lightroom default settings and my adjustments made to photos and then in do minor adjustments in Photoshop cs5 and then save in jpeg, well when I go to upload to my website or the others mentioned, the photos tuen green and desaturate and I am not sure why but need to fix this really bad, They do not turn green however when uploading to the blog...
View 12 Replies View RelatedThe attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies View Relatedhow I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies View RelatedLISP routine which will draw lines from the center/insertion point of multiple objects to 0,0,0 ?
View 9 Replies View RelatedI ment midpoint instead of center.Is it possible to select several different line entities and have them each rotated around its midpoint, or end point, so afterwards all have the same direction specified by a number or specified by direction of another entity?I wish command matchprop had that rotation option in its Settings.
View 9 Replies View RelatedI'm looking for a way to copy a text or a simple line, circle... ; after I copied it, the last entity change its color to green.
View 3 Replies View RelatedStarting this week, when I print my note cards from LR, the greenish line (aproximately 1/8") is added to the top of every photo. It's not noticable if I do draft mode printing. Also, if I print to jpeg file, then print this file outside LR, it's not there. I blamed it on 3.6 upgrade first, rolled back to 3.5, but it haven't solved the problem. I'm on Windows 7 and HP Photosmart Premium C309a printer. I really need to print lots of cards and I cannot!
Addition on 12/17/11 - the line is not noticable on black or any darker color.
I could be wrong though it seems Illustrator only has centre points of objects and not midpoints of paths or paths on the side of objects. Can this be?
If there isnt one, how to locate accuratly the midpoint of a rectangle (which is on a 10 degree angle) on one of the short ends?
I have also tried to draw a path leading from the centre point of the rectangle running parrelell to one of the long sides, although it's not like Sketchup that works out your trying to keep the line running parelell.
I'd like to have a menu option next to "Grounded" which is "Grounded to origin", to save setting three flush constraints every time I pull a part into an assembly and want it to have the same origin as the assembly. This is something I do quite a lot using the multibody part > derived part > assembly workflow. Apart from saving time it would save cluttering up the model browser. In the meantime is there a scripting method of doing this with one click? IV2013
View 5 Replies View RelatedI'm drawing a blank, how do I connect a UCS to the existing Origin of a part. I can select the Centre Point to attach the UCS to , but I have nothing the align the X & Y axis to (X Axis and Y Axis in the Origin folder are not selectable)
If I try to add a UCS to a blank part, the ONLY thing I can select is the Centre Point, but the UCS requires 3 inputs!
I am getting photos ready to be used in a Premeire Pro video. I was given these photo by someone who scanned them. There is a fine green line running through some of them. I have tried removing it with the clone and the healing tools but they don't work on it (they DO work on the rest of the photo). I cannot figure out how to get rid of this line. There are no layers to flatten. Any help would be appreciated. I have never seen this before.
View 2 Replies View RelatedI am new to Photoshop (Elements Vers 10).
Today I have been working on a photo (cloning out the background) and after about 4hrs work a thin green line about 1-2 pixel thick, has appeared across the center of the page. How it got there but I can not remove it.
I have tried saving the project (as a photoshop file) and then opening it as a new project in an old version of Photoshop (Vers 3 ?) to see if I could clone out the line, but it will not permit me to clone it.
What the line is, what I did to cause it to appear and how do I get rid of it. I possibly could export the project as a JPG and start as a new project.
My model is up in the top right of the planes. I cannot figure out why my origin planes are oversized like this. I have went through the browser and checked all the parts to see if something is out there, nothing. I have set auto-resize on origin planes and yet these are large.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
How to align a model to the origin, and NONE of them seem to be correct. I am using Inventor 2013. I tried the move body command, however there is no part of the dialog box that lets me choose a face or plane to align to.
What to do when you import a model that is not aligned to the origin?
How can i a re-adjust the orignal origin on an assembly? For example: i have a trailer frame (an assembly) and want to add a tank centered on top of it by constraining the center planes of both assemblies.. When i select the X-Axis/Pane from the trailer, it is not in the center of it, instead the X-Axis/Plane is 3/4 of the way off centered.
View 5 Replies View RelatedHow do you constrain an object to the origin once the origin constraint has been deleted. I'm not really sure how it became unconstrained in the first place. When I try to constrain the drawing using the coincident constraint it won't allow me to select the origin.
View 1 Replies View RelatedThis is ridiculous.
Left click + delete does not work.
Right click, no delete option.
How is this accomplished in Inventor? The 3D sketch environment seems intentionally crippled. Many of the constrains are not available, and the "include geometery" command refuses to include the origin (or any other planes and axis for that matter).
View 4 Replies View RelatedI'm currently designing a frame for a geodesic dome. I have created a wireframe from an excel sheet (I calculated the vertices in a c# program) and added this to my 5-edges-corner part as derived part.
I used the wireframe to create the part that can be seen in the attached picture (basically its a 5 sided cylinder and i used layers which i generated from the wireframe to cut away the top bits).
Now because the wireframe has its origin in the WCS origin, the part isn't centered in the WCS. If I use the "move body" tool to move the part, the layer that creates the cut is not moved as well and the cuts disappear. Also the rotation is kinda messed up.
My first idea was to define a UCS and use that to replace the WCS but apparently, that's not possible in Inventor 2014.
I would like to know, whether there is a way to make the cuts permanent and independent of the layer (which is dependent on the wireframe which i want to delete anyways as soon the part is done). And what the best way would be to move the part to the WCS origin.
PS: The screenshot is all in german.
I am using CS2.
I have a line drawing of a simple object that I would like to convert into a shape.
I have figured out how to cut the shape itself out of the original image using the magic wand select tool thing and altering the tolerance. So I have the cut-out shape on a transparent layer in a .psd file. All well and good.
I looked up "shapes" in the help center, and it says this:
"To convert type to shapes
When you convert type to shapes, the type layer is replaced by a layer with a vector mask. You can edit the vector mask and apply styles to the layer; however, you cannot edit characters in the layer as text."
It continues:
"Select a type layer, and choose Layer > Type > Convert To Shape".
Everything was going swimmingly untill that point - I go to the Layer menu - but "Type" is greyed out and therefore inaccessible.
I then did a search for "type layer" to find out what a type layer was - it says:
"About type layers:
After you create a type layer ...
tell me what a type layer is (I figure it has something to do with font, but I don't see how this relates to my line drawing), how to create one, or how to get my drawing into a type layer so I can convert it to a shape!
The screen shot below shows three coincident constraints and a projection icon on the origin.
looks like a projection icon - what does it mean?
I want to delete the three coincident constraints. But when I delete the coincident constraints there is no Sketch origin center point (the sketch origin center point is a square-yellow dot at the x-y intersection). How to delete or move the three coincident constraints with out deleting the sketch origin center point?
How the heck do you do this once a view is placed? I had to edit a part and the origin indicator is in the middle of no where now(and is pink). How can I either. 1.)Locate the new origin for my dimensions or 2.) delet the origin and start over?
Inventor 2011
Intel Core 2 Duo 2.93GHz
8GB RAM
Windows 7 Pro
I have a drawing that has had the origin indicator hidden.The part has changed, and I need to move the indicator to the new 0,0 location.How do I show the origin indicator again, or while it's hidden, move it to the new location?
View 4 Replies View Related