How can i a re-adjust the orignal origin on an assembly? For example: i have a trailer frame (an assembly) and want to add a tank centered on top of it by constraining the center planes of both assemblies.. When i select the X-Axis/Pane from the trailer, it is not in the center of it, instead the X-Axis/Plane is 3/4 of the way off centered.
View 5 RepliesI want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedI recently found an error in my top level assembly which is that the origin axes x & z are pointing in the wrong direction (x-axis points in the negative x direction and the z-axis points in the negative z direction). how to "flip" the origin axes of an assembly?
Additional information: I have a top level lattice assembly that consists of a number of lattices (a part to which components are constrained) with the lattice origin planes constrained flush with the top level lattice assembly origin planes. This top level assembly is used in many other assemblies to constrain entire systems. Re-constraining my lattices correctly inside of the top assembly is infeasible.
Is there a setting or something somewhere that turns off/on the display of the origin folder? I have rebooted and restarted Inventor. For some reason, I can't get see the folder. Even when I edit a part, it is not there. See attached images.
View 5 Replies View RelatedIs there a way using ilogic,that when you select/highlight a part within an assembly and run the code that it will turn on the Origin planes only and also turn turn them off ?
View 5 Replies View RelatedI have just installed Inventor 2012 and am experiencing a bizarre problem with placing content center parts. When I start a new assembly, and place a content center part, I would expect it to locate itself central to the assembly origin. What actually happens is that it grounds itself wherever I click on the screen. This doesn't happen with parts that I have created myself.
Is there a bug in the system or maybe an option that I have unknowingly switched off?
Inventor Professional 2012 SP1
Windows XP Pro 64 Edition SP2
I cannot select origin to constrain sketch with dimension to origin?
I selected Sketch,
expanded origin,
selected mywork plan (xy)
drew rectangle,
input dims,
right click for marking menu,
selected dimensions,
Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
I'd like to have a menu option next to "Grounded" which is "Grounded to origin", to save setting three flush constraints every time I pull a part into an assembly and want it to have the same origin as the assembly. This is something I do quite a lot using the multibody part > derived part > assembly workflow. Apart from saving time it would save cluttering up the model browser. In the meantime is there a scripting method of doing this with one click? IV2013
View 5 Replies View RelatedI'm drawing a blank, how do I connect a UCS to the existing Origin of a part. I can select the Centre Point to attach the UCS to , but I have nothing the align the X & Y axis to (X Axis and Y Axis in the Origin folder are not selectable)
If I try to add a UCS to a blank part, the ONLY thing I can select is the Centre Point, but the UCS requires 3 inputs!
My model is up in the top right of the planes. I cannot figure out why my origin planes are oversized like this. I have went through the browser and checked all the parts to see if something is out there, nothing. I have set auto-resize on origin planes and yet these are large.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
How to align a model to the origin, and NONE of them seem to be correct. I am using Inventor 2013. I tried the move body command, however there is no part of the dialog box that lets me choose a face or plane to align to.
What to do when you import a model that is not aligned to the origin?
How do you constrain an object to the origin once the origin constraint has been deleted. I'm not really sure how it became unconstrained in the first place. When I try to constrain the drawing using the coincident constraint it won't allow me to select the origin.
View 1 Replies View RelatedThis is ridiculous.
Left click + delete does not work.
Right click, no delete option.
How is this accomplished in Inventor? The 3D sketch environment seems intentionally crippled. Many of the constrains are not available, and the "include geometery" command refuses to include the origin (or any other planes and axis for that matter).
View 4 Replies View RelatedI'm currently designing a frame for a geodesic dome. I have created a wireframe from an excel sheet (I calculated the vertices in a c# program) and added this to my 5-edges-corner part as derived part.
I used the wireframe to create the part that can be seen in the attached picture (basically its a 5 sided cylinder and i used layers which i generated from the wireframe to cut away the top bits).
Now because the wireframe has its origin in the WCS origin, the part isn't centered in the WCS. If I use the "move body" tool to move the part, the layer that creates the cut is not moved as well and the cuts disappear. Also the rotation is kinda messed up.
My first idea was to define a UCS and use that to replace the WCS but apparently, that's not possible in Inventor 2014.
I would like to know, whether there is a way to make the cuts permanent and independent of the layer (which is dependent on the wireframe which i want to delete anyways as soon the part is done). And what the best way would be to move the part to the WCS origin.
PS: The screenshot is all in german.
When I draw a line at the origin, it does not find the origin and snap to it, or auto apply the horizontal constraint when near horizontal. Or if I draw an L the lines are not connected. That is, I can pull one line away from the other. I can not find the settingsto correct this behavior. What's up?
View 2 Replies View RelatedThe screen shot below shows three coincident constraints and a projection icon on the origin.
looks like a projection icon - what does it mean?
I want to delete the three coincident constraints. But when I delete the coincident constraints there is no Sketch origin center point (the sketch origin center point is a square-yellow dot at the x-y intersection). How to delete or move the three coincident constraints with out deleting the sketch origin center point?
How the heck do you do this once a view is placed? I had to edit a part and the origin indicator is in the middle of no where now(and is pink). How can I either. 1.)Locate the new origin for my dimensions or 2.) delet the origin and start over?
Inventor 2011
Intel Core 2 Duo 2.93GHz
8GB RAM
Windows 7 Pro
I have a drawing that has had the origin indicator hidden.The part has changed, and I need to move the indicator to the new 0,0 location.How do I show the origin indicator again, or while it's hidden, move it to the new location?
View 4 Replies View RelatedWe have imported an AutoCAD 3D model into Inventor and the process generates many individual Inventor parts which are placed in a new Inventor assembly. The parts are all unconstrained in the assembly but spacially positioned relative to each other as they were in the AutoCAD file.
We want to create a new, empty, assembly and place the individual parts one by one into the new assembly constraining them appropriately as we go. This way we can develop a more logical set of sub-assemblies and have the parts more intelligently connected.
So to the point of my question, at last!. Each individual part, generated from the import, contains just a single body. There is no sketch or any features. The part's origin is at the point of the original AutoCAD model's origin. All of the imported parts will have the same origin point. We want to move the part's single body in space to align with the part's origin point and planes. This way when we re-build the assembly we can use each part's origin planes when constraining the part.
There doesn't appear to be any way of constraining or 'snapping' a part's body in space to the origin planes.
I used this command all the time in previous releases (when it was in the SDK tools). In 2011 Win 7 64bit, the dialog always says "cannot place at origin" or something similar yet it does place the component there but does not apply the constraints. (Also my "make components" command puts a slight offset to my parts which could be a related bug of some sort.) The only non-autodesk addins I have loaded are the trial kwikinsertnfix addin loaded and Brian Ekin's Sheetmetalextents addin loaded.
View 1 Replies View RelatedI have problem with placing origin of ordinate dimensions on point where two centerlines are intersecting.
In my particular case I have rectangle and centerlines are in the middle of pararel edges. So they are crossing eatch other in the center of rectangle.
I need to place origin for ordinate dimensions in this point. But till now I had not find any way to do that except make a skkech and draw a line that's one end is exactly in the point I want. But it seems to me like rather ridicules aolution.
After I create a sketch, how do I center it about the origin? The origin is projected, I just can't figure out how to set the sketch about it.
View 4 Replies View RelatedWhen I am forced to use an existing part surface to start a sketch, the origin of the sketch invariably has no correlation to the part origin (UCS Origin). It seems it ties to some feature or point on the surface instead.
Is there any setting or method to force the sketch origin to be aligned with the part origin. Obviously it will only be aligned in two axis' but for the sketch, there is no need for a 'Z' axis (3d sketches aside).
I end up going to Edit Coordinate System to move the sketch origin to align with the part origin (UCS origin). That way I can always reference from a point that is consistent throughout the various sketches in the part.
Along the same lines, it seems that when a new sketch is created, IV orients the x-y plane based on random chance. Sometimes it its the plane in the same orientation as the UCS sometimes it turns it on its side and sometimes it flips it upside down.
This is using the three basic planes, not constructed ones. It just isn't consistent. So I often fins myself editing the coordinate system to reorient the sketch as well.
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I need to make the hole table origin symbol bigger to stand out on the drawing I am doing, I've looked around but can't see how to modify it's size, how to change it's size ?
Inventor 2013 SP2
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
what would cause the origin 3d indicator in the graphical window to be enormous? I'm talking 4x normal size.
Also, in the sketch environment, the little green and yellow dots that represent sketch points are huge, and the grid has gone really small.
Have tried changing graphics mode to "Compatibility" and selecting "Software Graphics" - No change.