AutoCAD Inventor :: Increase Size Of Hole Table Origin?
Jun 24, 2013
I need to make the hole table origin symbol bigger to stand out on the drawing I am doing, I've looked around but can't see how to modify it's size, how to change it's size ?
Inventor 2013 SP2
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I've got a template with a set of Object defaults for an Inch drawing and a set for a Metric drawing. I've just noticed that within my metric set, if I insert a hole table with tapped holes, the font on the tapped holes doesn't match the other hole types. I'm searched around, but all the settings for the hole table style reference the same text style. (Please see the attached image.)
So is there a way to set a certain hole type to have a certain font or size within a hole table? Because if there is, I'd obviously like to remove it..... But I can't seem to figure out where the issue is.
I have had this problem intermittently for a few weeks since going to Inventor 2013 SP1.1. I have a part within an assembly and that part has holes created in it before assembling it with other parts. Now when I try and create a hole table in a drawing of the assembly I cannot select hole edges and the hole table is blank when trying to create it automatically from view selection. I originally thought it may be an alignment issue but I have since aligned everything correctly and it still persists. I can create the hole table if I import in just the part into the drawing but it will not allow me to create the table on the whole assembly.
I can also create the hole table if I use "centred pattern" and create cross hairs on all of the holes however it does not give me correct annotations for the holes as shown in attachment and I can manually change the annotations but seriously this should not be required. As shown in the screen shot it reads as A1 down to K1 instead of A1 to A10. .
I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
how to set my origin point to a hole center. When you create the first ordinate dimension, you have to set the origin marker. For the upper view, I want to set the origin to be the same as the view below it. I can set it to the end of one of the hidden lines from the hole, but I can't seem to set the origin to the center of the hole.
I have a drawing of a sheet metal part that I did late last year. I used a Hole Table to dimension all the holes.
Fastforward to today. I added two holes that are different in size than any other hole. So when I opened the drawing it automatically added them to the Hole Table and gave them tag #'s in a new group and it kept the grouping in Alpha order. A, B, C were there before and it added D. Great, that's the way to do it.
Then I decided I needed to change the hole size. The change would keep the size different than any other hole on the part still. I go into the drawing and it change the size in the Table BUT, it also moved them up to the top of the list but kept the tag # as D*.
How do I get those two entries back to the bottom where they belong to keep them in order?
Is there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
I created hole table but i unable to merge the cells. but i need my output will be as per the input. How to make sure it is possible to give inventor 2011 & 2012.
The hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
I have created an iPart which uses the Hole Feature (counterbore hole). The hole is not threaded. Is there a way to put the Hole Feature into the iPart table so when a user enters specific values, he/she could type in or select a bolt size and the counter bore hole feature will use the correct dimensions for said bolt size (ie. I would like the counterbore holes for an M6 Socket Head Cap Screw. So instead of typing in the counterbore hole diameter, depth, and bolt diameter, etc... it would automatically enter the default values.) Or is this something that must use iLogic?
I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
I have a sheet metal part which has several holes in, from which I have created a hole table. The hole table does not list all the holes in my part as I am only permitted to to select holes on one face of the part in the selected view. I have tried selecting all holes on the Isometric view however I cannt do this either.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
Yesterday I tried to make a table-driven I-feature of a few drilling paterns.
I want to use this for drawing steel manifolds. The I-feature is used to insert standard drilling paterns, for example a patern to fit a standard flange.
The only problem is, for the thread I used the thread feature, otherwise it doesn't show up in the I-feature.
But when I make a drawing of a part were this I-feature is used, the specification of the thread doesn't show up when I create a hole table, because in the I-feature, the thread is a separate feature.
I have a .stp file that I am trying to dimension on a drawing. There are about 100 or so lightening pockets that are all the same basic shape (a rectangle with a full round on the ends). As of now I have been manually making a table for each location. Is there a way to create something like a hole table to automatically capture the locations of the pockets and create a corresponding table? I know I can create a centermrk on the round portions to use with a hole table but I want to dimension from the center of the pockets for the table.
I figured out how to change the precision of the X-Y location dimensions in a hole table, but is there a way to turn off trailing zeros? I have turned them off in my styles, but for some reason the styles don't effect hole tables. Maybe I just don't know where to look?
I'm trying to change the value in the description column through the formattedtext but the final result is not what is supposed to be, this is a part of my code.
Sub HoleTab()Set oDrwDoc = ThisApplication.ActiveDocumentDim oSheet As SheetDim i As IntegerSet oSheet = oDrwDoc.ActiveSheetDim oHoleTables As HoleTablesSet oHoleTables = oSheet.HoleTablesDim oTable As HoleTableDim oTableRow As HoleTableRowDim oTableRows
What is the best way to get a hole table on a converted SW file. Our Engineers use Solid works and I can easily import the file but when I try to create the hole table in the IDW file it comes up blank.
Do I need to recreate all the holes so they are native to Inventor? or I am missing a conversion setting.
Autodesk Inventor 2014 64 Bit Edition Build 170 Dell XPS 8300 Processor: Intel Core i7-2600 CPU 3.40 GHZ 16GM Memory 64 Bit Operating Windows 7
I moved the hole table from the original sheet to an other, but the fields in the title block of the new sheet don't update with the iproperties of the model
I cannot select origin to constrain sketch with dimension to origin?
I selected Sketch, expanded origin, selected mywork plan (xy) drew rectangle, input dims, right click for marking menu, selected dimensions, Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
In my workflow i always use a wireframe to do my design. I always try to put all the information necessary on that wireframe so that i don`t get myself lost in my own designing. That includes also the position of the holes that will be put on my structure.
To ensure that i have, later-on, no error. I try not to do anything adaptive. To make my holes without projecting those points, i use bolted connection. Before, when i was using that function, for the same sketch layout of a bolt pattern that i made, only on one member those holes where made. So i was forced each and every time to use that function as much as i had members to put those holes in.
Now with the new patch, i was happy, for some reason the holes where appearing to the other members. But Some time later, i realized that even though the holes where made, It wasn`t at the same sizes!!!
Is there a way to default to a standard hole size when starting a new part? ie. If you mostly place 10mm dia holes can this size be configured to be default in lieu of 3mm on the hole dialogue box.
I am trying to add a hole to an existing hole chart. I drop the part into a new drawing, set the ordinate "zero", and add a hole chart by selecting a few holes. When I attempt to edit the chart: click chart, right click "edit", click add hole, select new holes, right click to create, the "create" selection is greyed out and all I have to choose from is cancel. I searched the forum here but could not find a reference to this a know issue. Am I doing something wrong or is this a glitch of 2013.
We are running win7 x64 machines and this happens on both the 2013 Ultimate and Premium editions of the product.
Question: Is it possible to control the Hole Dimensions called out on the Hole Chart? As in controling leading/trailing zeros for main hole dim, alt home dim and tolerances? Can you combine the Main Dim with the Alt dim in a single column, separated with parentheses? (same with tolerance?)
