Illustrator :: Midpoints Of Path Or Sides Of Objects?
Jun 20, 2013
I could be wrong though it seems Illustrator only has centre points of objects and not midpoints of paths or paths on the side of objects. Can this be?
If there isnt one, how to locate accuratly the midpoint of a rectangle (which is on a 10 degree angle) on one of the short ends?
I have also tried to draw a path leading from the centre point of the rectangle running parrelell to one of the long sides, although it's not like Sketchup that works out your trying to keep the line running parelell.
I am trying to add an anchor to the left and right sides of a rectangular path at the exact same height. The easy method seemed: drag a guide to the right point and add the anchors at the intersection. But this is adding the anchors to the guide rather than the path "underneath" the guide? How can I place the anchor on the path?
When I use "object/blend/replace spine" it will distribute the objects evenly around the circle, but with no rotation. My issue is that I have objects shaped like people and would like them evenly around the circle, but rotated correctly so that their feet are all touching the circular path and their heads are always facing out. How can I achieve this?
I have a variable number of text lines I would like to arrange along the path of half a circle. I would like the text to look like each text-string is radiating from the circle (the path I have as half a circle).
I would like to do this in adobe illustrator
I would like the text to be evenly spaced along the path dependent on how many lines of text I have.
I have seen other discussions suggesting either the blend-tool or the brush-tool. But no luck. The blend-tool would make distorted shapes in between, and would twist and distort the text. The brush tool would make each text a little bit 'cone-shaped', and I would prefer having the text without such a 'cone-shape'.
I am attaching a picture that halfway shows my intentions. In this diagram I have started rotating the first 4-5 text-lines. I have more text-strings (just above the half-circle) that I also would like to include along the path the half-circle is indicating.
The final goal is to get each of these locality-names raditing from the tips in the little red tree.
Is it possible in illustrator to align the text along a path like this? It is almost similar to the normal align objects and distribute objects.
I am working on a Mac OSX 10.5 Adobe Illustrator CS3.
How can I distribute multiple objects without distorting them on a circle path?
I have a few objects that I want to distribute to a circle line. I've tried scatter brush (looked horrible) , pattern brush (what you see here).No matter what I do, those objects are distorted.
Clients may want objects to be as many as 30 or 40, so I hope to avoid switching the objects manually.
I'm working with another artists's file, and I can't seem to release the clipping mask he created. When I try, I get an error message that says, "Can't ungroup the objects." I've tried releasing Compound Paths, but I get the same message.
I'm trying to set up a script that will grab a group of objects and turn them into a compound path, then apply a clipping mask to the compound path and the next group in the layer.
Like in a Circle I need to make the compound path the inner area or negative space of my objects. I have expanded letters and joined their paths so that there are negative space, I was wondering if it were possible to fill in the negative space with a clipping mask? (like one would with an object like a circle or rectangle) The letter that I am using is an A and I have connected two A's together like a diamond reflecting each other... Is it possible to create a clipping mask to cover the negative space of the inside of the letters...?
I want to create an illustration with black outlines. Within these outlines I want to have some spots without outlines that stay clean within the lines. I have tried 3 options so far and have found a solution but it's far from ideal.
1. Create clipping masks for each element that has a spot on it and assign a stroke to the clipping path again after. However by creating the clipping path, the path styles dissapear. In this case I want to keep the pointed ends to the open path outlines (see top image).
2. Draw in the lines where the spots are and create a live paint object of the entire illustration. Then paint in the spots and other areas. However when I create this live paint object the lines again lose their applied styles and even 'end' at each intersection, creating nasty edges where the lines should go 'underneath' smoothly (see bottom image).
3. The option Im using now. Duplicate the path outlines and create clipping masks for the spots without strokes. Then put the stroked outline with the desired styles on top. The problem with this is that I have almost twice as much elements in my illustration now than I actually 'need'. And the styled outlines are not connected with the color underneath, so its very easy to accidentally move something around...
Any easier way to create this effect without all the hassle?
i have a problem with path edges after using shape builder tool or masking objects. This problem occurs when i draw bright colored objects above dark colored object. After that i have dark path's edges. Like this: [URL] I have one solution (pathfinder->dive objects and delete some dark elements on the bottom).
Is this possible? The polygon tool always reverts to 6 sides, I would like to be able to change that and have whatever No. of sides I choose 'stick' until I decide to change it again.
If I draw a rectangle and use Extrude&Bevel to create a 3D "box" shape, how do I wrap a single line of text around three of the sides? I've created a Symbol from the text, and it shows up in the "Map Art" dialog window's "Symbols" selection, but only one face of the 3D box is shown at a time. I was hoping to see a flattened box shape showing all six faces so I could accurately place the line of text. Similar to what you see when you revolve a path to get a 3D object.
It's even worse if I apply a bevelled edge to the extrusion -- then there are 40 separate "faces" to deal with.
I have a template for a marquee. There are 4 sides to it, so I wondered if there is a way to duplicate the artwork from the first side onto all other sides...without doing them individually 4 times?
So if I select the roof, for example, and insert artwork - can the other 3 roofs be 'linked' in some way, so they become duplicates automatically?
I've tried recording an action for copying, rotating, moving and pasting but it keeps coming up with an error about the Move function not being available.
All of a sudden when i create a circle on the origin it is not turning green and constraining the circle to it. Also when i am creating a line from the midpoint of another line the midpoint is not turning green and the line is not constrained to that point. I have checked the autoproject origin box in the appl settings and it is active.
Using illustrator CC, I want to curve the bottom line of my text upwards, but not have the top or sides move at all. Imagine of the text was something squishy, and I pushed it down onto the top of an arc. I've only been working with Adobe CC for about a week now. I've seen lots of examples of having the text follow a curved path, but they all curve the entire thing, whereas I only want the bottom of the text to curve.
For some reason I do not understand I cannot change the number of sides of a polygon by dubble clicking on the tool. For other tools (where you can change something) this is no problem and workes, but not for the polygon tool.
I ment midpoint instead of center.Is it possible to select several different line entities and have them each rotated around its midpoint, or end point, so afterwards all have the same direction specified by a number or specified by direction of another entity?I wish command matchprop had that rotation option in its Settings.
Say I have a square or a polygon. I want to transform one of the sides from straight to a smooth curve. Is there a way to do this?
I have the pen tool and I'm tracing an object. I want to create one curved side then continue on with straight edges. However the tool insists on creating 2 or 3 curves at a time.
Is there a way to create a single isolated or part of a shape curve thats adjustable with both endpoints. It seems that curves I create often are missing adjustment levers at one of their endpoints making it harder to get the shape I want.
I want to create a right-angled triangle (just the three sides, no fill) where each side is a different color (say red, blue, and green). For generality, let's assume it's a scalene (rather than isosceles) right triangle. I want the weight of each line to be about 3pt. (But I guess that's not a crucial number. Let's say I'd like the sides to be 20 or 30 pts thick, for the thrill of it.) I know how to draw the three lines of specified width, make them different colors, and arrange them into a triangle. My problem is how to make the vertices (corners) look miter-joined rather than have them overlapping each other, which obviously looks terrible and like something an infant drew in Microsoft Paint. ;-) If I join the 3 paths into a single shape, they all become the same color, so I'm thinking I have to keep it as 3 separate lines (paths). The only solution I can think of is: Instead of drawing three lines of 3pt weight, draw three extremely thin rectangle shapes (about 3pt wide), one of each color, and rotate/position them so that they form the sides of a right-angled triangle. Then go in and do some visual surgery at the vertices to make the vertices look miter-joined.
Setup 3 bar graphs (i.e. horizontal bar charts), with some data and text labels. Set them all in Type to Value Axis > Tick Marks > Full widthUnder graph > type, leave one as Value Axis: On Bottom Side. Change one to Value Axis: On Top Side. Change one to Value Axis: On Both SidesChange the stroke width and colour of these tick marks / lines the correct way - clicking twice with the 'plus arrow' Group Selection tool to select the whole group, and applying the formatting to the group.Update the chart, e.g. change the data or go into Object > Graph > Type and hit Okay, Desired behaviour: The re-drawn tick lines should keep their assigned formatting like other groups in a graph.
What I actually see: The desed behaviour happens but only when the Value Axis is set to On Bottom Side. When the value axis is set to On Top Side, the tick lines are reset to an ugly default - 1pt thickness and pure black. When it is set to Both, the lines associated with the bottom labels keep their formatting, the lines associated with the top labels forget their formatting and revert to the default.
I'm trying to set up some chart templates that need the labels to be on the top side, and that need to be editable without losing their formatting. This bug as it stands is making this simple task impossible.
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
I've got two paths. They don't intersect, exactly, a straight path ends at a curved path, but I need the end of the straight path to be curved, to make it look like the two meet perfectly. The two gray paths (a single path, then path->offset for the second) are the outside of a shield shape. The two black lines (paths) just surround text, but currently they overlap the gray paths.
How can I animate the actual path, NOT objects on a path. I am trying to animate on screen as if someone is writing text. Or spelling their name out. I can't figure this out. How to do this using indesign?
I love the function in Photoshop in which you can stroke a selection with a brush. Was wondering if that was possible in CorelDraw X4 as well. I know that we can put text on a path, but is that also working with objects?
Since I like making patterns, I would like to place and distrubute objects along a circle or hexagon shape (and other simple shapes).
The task being, trying to erase part of a simple shape dragged onto the page from the tool bar. When I use the eraser, it deletes what i am trying to delete, but leaves a trail of the erasers path. This is probably very basic stuff, but I am at my whits end to work this simple problem out.
