Illustrator :: Aligning Objects Or Text Along A Curved Path
Aug 11, 2012
I have a variable number of text lines I would like to arrange along the path of half a circle. I would like the text to look like each text-string is radiating from the circle (the path I have as half a circle).
I would like to do this in adobe illustrator
I would like the text to be evenly spaced along the path dependent on how many lines of text I have.
I have seen other discussions suggesting either the blend-tool or the brush-tool. But no luck. The blend-tool would make distorted shapes in between, and would twist and distort the text. The brush tool would make each text a little bit 'cone-shaped', and I would prefer having the text without such a 'cone-shape'.
I am attaching a picture that halfway shows my intentions. In this diagram I have started rotating the first 4-5 text-lines. I have more text-strings (just above the half-circle) that I also would like to include along the path the half-circle is indicating.
The final goal is to get each of these locality-names raditing from the tips in the little red tree.
Is it possible in illustrator to align the text along a path like this? It is almost similar to the normal align objects and distribute objects.
I am working on a Mac OSX 10.5 Adobe Illustrator CS3.
View 5 Replies
ADVERTISEMENT
Mar 9, 2013
I have two simple text objects (not textarea) and i'm trying to align them vertically to bottom.It aligns these text objects by bounding box, not by base line. How can i align text objects vertically by base line?
View 6 Replies
View Related
Feb 13, 2014
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies
View Related
Feb 20, 2014
How can i extend a curved drawn path to include the text thatis hidden on it? I have extended the drawn path (pencil tool) but a red cross in a box symbol stops the text from showing.
View 3 Replies
View Related
May 23, 2013
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
View 2 Replies
View Related
Aug 22, 2013
I am trying to create a circle where I can align a stroke to the outside of a path - however I need to be able to break the circle up into sections - once I do that - I cant align to outside anymore.
Aside from breaking the green section apart and aligning it manually by eye, is there no other way to do this? Perhaps by aligning all segments of the circle to another circle (one that hasnt been broken apart?)
View 10 Replies
View Related
Sep 10, 2012
software like indesign and coreldraw allow you to align centres of texts and objects.
for example if i have written the word bedroom and a rectangle of 3000 by 4500 is therem, i can select the text and the rectangle. press the aign to centre button and these two things will align their centres. how can i do that in autocad?
View 2 Replies
View Related
Oct 2, 2012
If you can use the ALIGN command to align multiple text objects in the Y-Axis? (or X-Axis as well)
I know about changing the X value of a bunch of text objects to align them that way. I'm just wondering if the ALIGN command will allow you to do something similar?
I want to do this without lisp too. If there are other methods I'm always wanting to learn! I just had a new cad user ask me about the ALIGN command and I couldn't get it to do it.
View 3 Replies
View Related
May 15, 2012
I'm an occasional Gimp user and am having a problem tryingto create some CD/DVD labels. I want to put text on a curved path but haven't beenable to get a persistent path.
I've followed instructions in the help manual and from the "Beginning GIMP" bookabout creating a path but the path won't display after switching to a differenttool.
These screenshot links show:1) Using brush selected for path
[URL].... Using line selected for path
[URL]...Resulting path (same for both types)
[URL]....
As soon as I select the text tool, the path disappears. Obviously I'm missing somestep that would make the path persistent or I'm misunderstanding how paths work.Shouldn't the path remain visible?
The Gimp version is 2.6.12 on a KDE desktop under openSuSE 12.1 & 12.2.
View 3 Replies
View Related
Jan 16, 2005
text "wrapped" around paths, but they were all along the outside. How can I get text to curve along the "inside" of a closed path (like a Circle)?
View 4 Replies
View Related
Aug 29, 2013
I am using a very old version of Photoshop (i.e. Photoshop 6.0).If it is possible to create text along a curved path in Photoshop 6.0 (Windows)? If so, how?Note that I do not want to create wraped text (using Arc etc.).
Specifically, I want to type text along the lower half of a circular image.checked various blogs that show how to do that for more recent versions (or MAC version) of Photoshop.
View 6 Replies
View Related
Mar 14, 2012
For some reason I am unable to create text to follow a curved path. For example, I created a simple curved line using the shape editor tool. After selecting the completed line I select the main text tool (the other text tool, fit text to curve, is grayed out and not selectable). However, wherever I insert the cursor along the curved line I still end up with a straight line of text. After much experimentation I still cannot figure it out. I know I am leaving out a simple step.
View 3 Replies
View Related
Nov 15, 2012
Is there a fast and simple way to make a straight path curved? I'm a FreeHand convert, and with it you could hold down the option key, click and drag the straight path (line) into a curve and control it fairly well.
View 10 Replies
View Related
Dec 29, 2013
Is it possible to fill a shape with texts or have text follow a curved path?
I know you can do these things in photoshop and illustrator but am not sure if they can be done in GIMP!
View 2 Replies
View Related
Jan 14, 2014
I have created a sphere shaped logo for a client in AI. I've used the 3D revolve function and mapped clouds over the top of it (the clouds were drawn initially as a shape).
The client is suggesting that the sphere is not perfectly crisp and that you can see some slight stepping in the curve around the sphere and the curve around the clouds mapped to the sphere. I've not come across this before (not sure if she's just being really picky, blowing the logo up too large for scale, or I'm just missing something really stupid!).
Anything to tighten the curve of the sphere so that it is crisper?
I can definately see her point in the clouds mapped on top of it - perhaps if I try more anchor points on the clouds path, that may tighten the curve on the clouds? Is this something I can do automatically?
Also, what are the best settings to export out for the crispest format (ie, Progressive Compression + 300 dpi resolution + Art Optimised sampling?).....
Sample above -
View 4 Replies
View Related
Jun 5, 2012
Usually, when you check the 'dashed line' option on the stroke pallete, you will instantly create a dashed-line stroke on the selected path. What I don't know how to do is retaining the straight property of a dash on curve parts of the path.
(Improvised image for illustrating my problem)
View 8 Replies
View Related
Oct 17, 2012
I am struggling to properly align text because the bounding boxes are not centered around the text. Therefore, when I try to align it with another object, it is off. I am using CS 6 and, generally, the point and type tool. it might be the type of font (that perhaps they are "bad" fonts) but it doesn't seem to matter which type of font I use. The bounding box always has extra space underneath the text, even when using a very standard font like Times New Roman.
View 5 Replies
View Related
Jul 6, 2012
I have a circle and a text as shown below. If i try to align the text and the cirlce, they are not aligning exactly. There is some difference in it as shown below in the first alignment. If i convert the text to outline and align, its perfect. Is there any way to align the text with circle exactly?
View 5 Replies
View Related
Nov 5, 2013
I'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
View 4 Replies
View Related
Apr 10, 2012
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
View 4 Replies
View Related
Jan 9, 2013
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies
View Related
Mar 20, 2014
I accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies
View Related
Jul 11, 2013
Is there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies
View Related
Dec 3, 2002
how to align a layer to a path I've created using the Pen tool;
I'm using Photoshop 6,
View 3 Replies
View Related
Jun 20, 2013
I could be wrong though it seems Illustrator only has centre points of objects and not midpoints of paths or paths on the side of objects. Can this be?
If there isnt one, how to locate accuratly the midpoint of a rectangle (which is on a 10 degree angle) on one of the short ends?
I have also tried to draw a path leading from the centre point of the rectangle running parrelell to one of the long sides, although it's not like Sketchup that works out your trying to keep the line running parelell.
View 15 Replies
View Related
Aug 14, 2011
is there a way of aligning an object along a path? For example an elipse or an arc.
View 2 Replies
View Related
May 10, 2011
I want to create a Picture like the following one with 3ds max, but I don't know how (except of manually aligning the spheres). I tried it with Position Object in PFlow, but i get nothing but random Alignments around my Base Object.
View 3 Replies
View Related
Nov 6, 2013
When I use "object/blend/replace spine" it will distribute the objects evenly around the circle, but with no rotation. My issue is that I have objects shaped like people and would like them evenly around the circle, but rotated correctly so that their feet are all touching the circular path and their heads are always facing out. How can I achieve this?
View 2 Replies
View Related
Nov 28, 2013
How can I distribute multiple objects without distorting them on a circle path?
I have a few objects that I want to distribute to a circle line. I've tried scatter brush (looked horrible) , pattern brush (what you see here).No matter what I do, those objects are distorted.
Clients may want objects to be as many as 30 or 40, so I hope to avoid switching the objects manually.
View 8 Replies
View Related
Jul 18, 2013
I'm working with another artists's file, and I can't seem to release the clipping mask he created. When I try, I get an error message that says, "Can't ungroup the objects." I've tried releasing Compound Paths, but I get the same message.
View 4 Replies
View Related
Dec 5, 2006
The DVD is a music DVD and thus I have text for each song name in the chapter list. I have created each song title on a different layer, but wish to align each of those texts in a position that is central (horizontally) on the page. Is there a quick way to do this?
View 3 Replies
View Related
