I'm working with another artists's file, and I can't seem to release the clipping mask he created. When I try, I get an error message that says, "Can't ungroup the objects." I've tried releasing Compound Paths, but I get the same message.
View 4 RepliesI want to create an illustration with black outlines. Within these outlines I want to have some spots without outlines that stay clean within the lines. I have tried 3 options so far and have found a solution but it's far from ideal.
1. Create clipping masks for each element that has a spot on it and assign a stroke to the clipping path again after. However by creating the clipping path, the path styles dissapear. In this case I want to keep the pointed ends to the open path outlines (see top image).
2. Draw in the lines where the spots are and create a live paint object of the entire illustration. Then paint in the spots and other areas. However when I create this live paint object the lines again lose their applied styles and even 'end' at each intersection, creating nasty edges where the lines should go 'underneath' smoothly (see bottom image).
3. The option Im using now. Duplicate the path outlines and create clipping masks for the spots without strokes. Then put the stroked outline with the desired styles on top. The problem with this is that I have almost twice as much elements in my illustration now than I actually 'need'. And the styled outlines are not connected with the color underneath, so its very easy to accidentally move something around...
Any easier way to create this effect without all the hassle?
I'm editing a logo for a client. Part of their logo is a gradient behind a clipping mask. When I release the clipping mask the gradient is uneditable. I have checked my layers panel and ther gradient is listed as image. I am using illustrator cs5 on Mac os 10.6.8..
View 1 Replies View RelatedI drew some simple paths in Photoshop with the pen tool, then exported the paths to Illustrator. All the paths came into illustrator as compound paths, though they look like simple paths in illustrator. Because they are compound paths, I can't join the ends of the paths to the ends of other paths.
Whe I select one of these paths:
Object>Compound Path>Release is greyed out and unavailable. "Release Compound Shape" in the Pathfinde palette menu is also greyed out and unavailable.
Is there any way to make these paths back into simple paths without redrawing them? I'm using CS6 versions of both Photoshop and Illustrator.
Win7 64bit Ai: Cs6
[URL]
down under step #4 it says to Copy (& Paste) the circle that's inside a Clipping Mask and to the drag it out of the mask in order to duplicate it twice.
I've pulled it out of the mask or even, actually, how to go about pulling it out of the mask
thus far I've Copied and Pasted in In Front ... does copying and pasting it in front bring it outta the mask?
do i need to create a new layer after I've Copied it and then Paste it on the new layer?
I have some type converted to outlines, and it is in front/on top of a places raster pattern. when I select the type shapes and pattern and make a clipping mask, the pattern disappears and the letter shapes are filled with nothing!
Matters not whether the letter shapes are grouped or not...is there a way to have all of the letter shapes act as clipping mask together?
Trying to mask type with a vector pattern (place a vector pattern in a type clipping path), but nothing seems to be working. Never had issue before. Tried path in front, pattern in front, converting type path to compound path, converting vector to compound path. A couple of times it looked like it worked, but the pattern was invisible within the path. Illustrator CS6, on a Mac.
View 2 Replies View RelatedI'm trying to create a clipping mask of a photograph using several separate shapes and then separate the final masked image/shapes.
I've made the shapes a compound path, and then applied a clipping mask (so far so good).
Now that I have my masked photo/shapes I want to separate the shapes so I can edit them individually and independent of one another.
(using Illustrator CS4)
I'm creating a logo that employs a stippled texture (a half-tone) in various sections of objects comprising the logo. I've placed the stipple where I want it, created a clipping path to capture the area. Now I have all these other points that I don't need that I want to delete.
Is there anyway short of releasing the clipping path, manually delete unwanted sections of the stipple and then re-apply the clipping path again? It would be like 'Applying Mask' in photoshop.
Any way to do this using strokes, but everything I've tried so far has been unsuccessful. I'm starting to realize that this may actually be impossible, but maybe there's a trick I'm unaware of. Pic should explain what I'm trying to do.
View 3 Replies View RelatedI've devised this script that "kind of" works.This script takes your selection, copies appearance attributes, and pastes them to the top object after clipping.It's currently limited in a few ways:
• It does not accept compound paths as clipping object (and I don't know how to test for it, nor how to iterate down said compound clipping object to set each path object to clipping separately)
• It only works with a single stroke or fill
• It does not understand "no fill" it will fill your object with white instead *FIXED*
• I'm hoping to use the "graphicStyle" property to copy the appearance, since that sounds way cleaner. But I don't understand how to.
Even with these limitations, I bound this to CMD+7 using fastscripts - I'm *already* used to it working this way!
#target Illustrator
// script.name = Clip Retaining Color.jsx;
// script.required = at least two paths selected, top most path is the clipping mask;
// script.parent = Herman van Boeijen, www.nimbling.com // 30/11/13;
// *** LIMITED TO A SINGLE STROKE AND/OR FILL OF THE CLIPPING OBJECT***
// Here's hoping to use the "graphicStyles" property to copy over the appearance.
[code]....
I've done some tests and it looks like clipping mask and pathfinder>crop (CS5) do pretty much the same thing. I realize that clipping mask leaves the paths of the original objects for possible release while crop is creating a new path.
When would you choose to use one vs. the other? The only thing I can think of is when you want to end up with a new object use crop but if you want to maintain the integrity of the original objects use clipping mask.
Is it a toss up?
I have created custom text, so that each letter in my 3 letter word is a separate compound object.
Now I have made a filled (with gradient) ellipse and rectangle behind the text to create a clipping mask with all 3 text objects. (see image1) However, when I select all the objects and select: object>clipping mask >make, it only mask the one letter, which is the one on top. (see image 2)
However, when I group the 3 letters together, it does not create a clipping mask at all, it shows nothing... (see image 3)
How do I ake all 3 letters be in the mask?
[URL]
We have created a simple label and grouped several components in CorelDraw X5. Now we cannot ungroup the components. When we right-click the group, the options to group or ungroup are dimmed. The result is the same when right-clicking on the group in the object manager docker.
Perhaps related, is the fact we cannot select the components of the group from the object manager docker. We can select the group, but none of the individual components in the group. None of the layers is 'Locked' in the object manager docker so we should be able to edit them.
What might be preventing us from accessing the ungroup option for a group?
I'm wasting time having to place my image in Illustrator then manually line up the clipping path. You used to be able to save a file with a clipping path as an EPS in photoshop, select "retain vector data", place in illustrator and hit cmd Y to see the clipping path. I need the image and the clipping path in Illustrator and the image is too complex to create a mask in Illustrator. I tried to save it as an EPS but "retain vector data" is grayed out.
View 2 Replies View RelatedI can't ungroup objects. This option has been greyed out.
View 10 Replies View RelatedI could be wrong though it seems Illustrator only has centre points of objects and not midpoints of paths or paths on the side of objects. Can this be?
If there isnt one, how to locate accuratly the midpoint of a rectangle (which is on a 10 degree angle) on one of the short ends?
I have also tried to draw a path leading from the centre point of the rectangle running parrelell to one of the long sides, although it's not like Sketchup that works out your trying to keep the line running parelell.
When I use "object/blend/replace spine" it will distribute the objects evenly around the circle, but with no rotation. My issue is that I have objects shaped like people and would like them evenly around the circle, but rotated correctly so that their feet are all touching the circular path and their heads are always facing out. How can I achieve this?
View 2 Replies View RelatedI have a variable number of text lines I would like to arrange along the path of half a circle. I would like the text to look like each text-string is radiating from the circle (the path I have as half a circle).
I would like to do this in adobe illustrator
I would like the text to be evenly spaced along the path dependent on how many lines of text I have.
I have seen other discussions suggesting either the blend-tool or the brush-tool. But no luck. The blend-tool would make distorted shapes in between, and would twist and distort the text. The brush tool would make each text a little bit 'cone-shaped', and I would prefer having the text without such a 'cone-shape'.
I am attaching a picture that halfway shows my intentions. In this diagram I have started rotating the first 4-5 text-lines. I have more text-strings (just above the half-circle) that I also would like to include along the path the half-circle is indicating.
The final goal is to get each of these locality-names raditing from the tips in the little red tree.
Is it possible in illustrator to align the text along a path like this? It is almost similar to the normal align objects and distribute objects.
I am working on a Mac OSX 10.5 Adobe Illustrator CS3.
How can I distribute multiple objects without distorting them on a circle path?
I have a few objects that I want to distribute to a circle line. I've tried scatter brush (looked horrible) , pattern brush (what you see here).No matter what I do, those objects are distorted.
Clients may want objects to be as many as 30 or 40, so I hope to avoid switching the objects manually.
I'm trying to set up a script that will grab a group of objects and turn them into a compound path, then apply a clipping mask to the compound path and the next group in the layer.
View 5 Replies View RelatedLike in a Circle I need to make the compound path the inner area or negative space of my objects. I have expanded letters and joined their paths so that there are negative space, I was wondering if it were possible to fill in the negative space with a clipping mask? (like one would with an object like a circle or rectangle) The letter that I am using is an A and I have connected two A's together like a diamond reflecting each other... Is it possible to create a clipping mask to cover the negative space of the inside of the letters...?
View 6 Replies View Relatedand what are the advantages of using them?
View 9 Replies View Relatedwhen I'm drawing clipping paths around an object that has spaces within the image (i.e. space between someone's arm and body, or the space(s) within an object such as a coffee cup handle) does it not clip out the paths inside the outermost path? Do the inside paths need to be drawn first? I'm scratching my head here - it seems to be a CS4 thing, as other versions of PS have not seemed to do this...
View 2 Replies View RelatedHow do you Un Group several layers in Illustrator? My drawing had layers of information but now is frozen as one and I can't access or change the individual elements within the layers panel or dby picking them in the drawing.
View 6 Replies View Relatedi have a problem with path edges after using shape builder tool or masking objects. This problem occurs when i draw bright colored objects above dark colored object. After that i have dark path's edges. Like this: [URL] I have one solution (pathfinder->dive objects and delete some dark elements on the bottom).
View 3 Replies View RelatedI want to make a clipping path around a person who has hair blowing in the wind. How can I make a good clipping and get close enough without losing the effect?
View 4 Replies View RelatedI'm using Tiger and Photoshop CS2.
We are having a problem with one of our clipping paths. Once we convert the image into a compression image for use, the image does not appear at all. No path, no image no nothing. Any idea why this happened? I know that the designer who worked on the original file used the incorrect "path area" selection (at the top) but changed that.
I created a clipping path on a photo, clipping out a person's head so that I can have the person's head show up over the masthead on a cover.
But when I save the photo in Photoshop and then import it into Quark, the option where it says I can change the clipping options in Quark is greyed out.
This is what it says to possibly fix it on the Quark help page:
"You may want to choose "None" from the Clipping path pop-up menu when you save the image from Adobe Photoshop, so you can specify which path to use as the clipping path when you import the image into QuarkXPress. Or, you may want to choose a path from the Clipping path pop-up menu, so you can be sure only that path will be used to clip the image."
I don't understand what that refers to....I can't find anything like that in the Photoshop options.
My goal is to have the person's head over the text, with the rest of the photo still retained in the background. As it is now, I just get an import of the clipping path alone, with Quark substituting the background part of the photo with a white box.
In CS5, I created a very handy action that allowed me to, with two paths selected, Divide, Ungroup, and Deselect, resulting in the divided paths without having to do each step manually.
In CS6, for some reason this is no longer possible-- if I try to record the same action, after the divide, everything is automatically deselected and I get a "The object "Ungroup" is not currently available" error. Very frustrating that the new version is more troublesome to use!!
I KNOW that it's possible to do this because I was somehow able to fudge it at one point and get this action to work. But I'm not sure what happened-- maybe a step was deleted in my action or something-- but one day it just stopped working. This action is basically THE function I use most in Illustrator given the way I work, and while it's not a huge step, having to manually reclick, ungroup, and deselect is a huge inconvenience.
In PS cs6 i cant find how to create clipping path for layer group (apply to folder from some shape layer with alt + drag&drop) created with pen, rectangle etc tools. Here is how it should look in cs6 but i don't know how to do that ?
View 5 Replies View Related