Is it possible to compress a line or object drawn on top of another line or object to create one object?
I import my AutoCAD 2011 drawings into a CNC however the software isn't happy if a line is drawn on top of another line. If this happens it is not obvious simply by looking at the drawing and I have to go through the drawing checking each and every line which can be quite time consuming.
I was wondering is there an option where you can dim or change the opacity of a drawn line? Similar to when you can change the linetype and linewieght, is there a precentage that allows to dim lines? Like when you insert .pdf plans as underlay, and you can actualy reduce the opacity. So that when you plot the plan drawing, some lines look solid black, but some are almost impossible to see? Or should I just change the colour of the line to light gray?
View 5 Replies View RelatedI have existing drawings that I copy and manipulate into new ones. I have a drawing of a conveyor line that has some segments "highlighted" with a yellow hatch that appears to follow a single line. The conveyor layout has been changed. So I need to update the drawing for the new layout. I'm wondering how this was drawn. I cannot explode the hatch to copy parts of it. I'm thinking there was probably a simple way to get the hatch to follow the drawn line. Putting boundaries around the drawn line to hatch in would be rather time consuming. Is there a simple function I don't know about?
View 6 Replies View RelatedAny one deal with lines that appear to the right of each line that is drawn? For example if I draw a vertical line I get a line at the start point and the end point that display off to the right 2 cm or so. Zoomed in or out, always about 2 cm. After about 15 minutes, every line does this. Pretty bothersome. I thought it was a graphics card but the blocks in my drawings go off to the right in which they were created. So if the block is rotated, these little 'tails' rotate with it.
I tried some troubleshooting - Reinstalling/updating graphics card driver, switching monitors, but no luck.
I have 8gb of ram on a windows 7 Bit system, and have an Autodesk/AutoCAD certified graphics card - an AMD FirePro 3900 (ATI FireGL). You'd think that this 'certification' would prevent problems like this. What do I know.
On a side note, Draw Order > send to back/send to front does not appear to work either on my display.
I have a user that when he draws the first line he does not see it until the second line or other action is taken. Photoshop is similar to this when drawing lines. Is there a setting to change that in the command line?
View 2 Replies View RelatedI am new to AutoCAD and I want to draw something in it, I have taken screen shot of a google map and placed it in AutoCAD, Now I want this map to be scaled proper size, for example I have 880meter x 330meters but placed object is only 20' x 15'.
How can I resize it or how can I make my drawn line to be exact 880meters ? ( I will resize my picture according to my drawn line).
I have pieced this lisp together from a few I have come across here in the groups, but am now stuck with the final pieces. Once the pline is drawn I would like the lisp routine to select the pline (last ?) instead of the user doing so. I would then like to offset the line 1 (foot) and then erase the original line drawn, so the user does not have to.
View 9 Replies View RelatedI recently got a new drawing tablet (Monoprice Graphics Tablet) and i set up everything perfectly fine. However, i opened photoshop cs6 and when i draw, there would be an extra line. when i draw a semi circle, it automatically completes the gap with a straight line when i lift the pen up or stop drawing and it's really bothering me.
Here is a gif that i made to demonstrate what i mean: (click if it doesn't move)also... my lines appear to be sort of jittery or non-smooth. even my mouse looks smoother than when i use my pen..
I know that I can animate using basics animation feature un Xara. Any way to create an animation showing every line drawn. Like in this exemple : [URL] I could record xara using screencast software but maybe there is a way to do it in automaticaly in Xara one the drawing have been made or maybe a software in wich I can import svg file to animate the lines.
View 7 Replies View RelatedHow to choose the thickness change line drawn?
or
Select the objects to be drawn?
I have a cartoon line drawing. The black outlines are anti aliased so the edges of the lines have different grades of gray pixels on them. When I use the fill tool, and adjust the fill with the opacity and tolerance sliders, (I think that's what they're called in GIMP), I still can't get what I want. Only some of the gray pixels are colored in. Others are canceled out. Completely covered by the color, erasing some of the line.
Or some pixels remain uncolored. Just gray instead of a combination of the gray AND the fill color. What I'm looking for is an effect that looks like I placed a colored gel shaped like the cartoon character over the drawing. All the different shades of gray pixels should still be seen. Even the ones that are lighter than the fill color. With a gel, those pixels would appear darker, even though they were lighter than the fill color without the gel over them. The darkness of the color PLUS the added darkness of even the lightest gray pixels should make all the pixels appear darker. And the line would appear complete. Not partially erased.
Is it at all possible to get this effect?
I am making a conatct sheet of photos. I wanted to define the outside edge of the photos, so I used the Rectangular Marquee to draw an outline around the perimeter, and then I went to Edit>Stroke (Outline) Selection. I chose the weight of the line (I made it 3 pix) and successfully had the outline. I then saved the file.
But now I want to change the weight of the line (down to 1 pix). But I can't figure out how to delete the 3 pix line.
I am using illustrator for doing some calligraphy and I am not really experienced with this program. I am using a mouse pen with pressure to draw/write calligraphies. My question is, can I change the pressure amount after I drew lines using brush tool. Let’s say I drew a line, it is good but still not satisfactory. I just want to do a little change in pressure amount in some segments –not all the line- on line. Does illustrator give me this option?
View 5 Replies View RelatedSo I am basically a brand new user to ai-cs6 and have been working on a project for a friend. I've drawn up the basic components of the logo she wants, all separate individual pieces. My intention is/was to trace in each piece, and scale, rotate, and clean them up according to how the final piece should look. Where I'm running into trouble is that the sketches are not point perfect, meaning there's some shading in the hand drawn, and the lines are rough in areas. I'm trying to avoid redrawing the pieces because we both are really happy with where they're at.
What I'd like to do with ai-cs6. How to trace very simply a one line vector of the outline of the image. So instead of creating a piece that has stroke straight from the scanned in artwork, I get a single line, with multiple points, that flows the simple shape of the piece. From there it seems it would be pretty simple to just increase the stroke weight and modify the style of line to make it look how we would like. except that since the sketch has some rough line sections ai-cs6 is adding either a lot of detail and making it look pretty rough, or it's missing entire sections and leaving them blank.
Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View Relatedif I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
I have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View RelatedI have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies View RelatedI created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View RelatedI draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
angle.jpg
How can I draw the bottom line, with an angle of 132 relative to the middle line?