I'm having a really weird problem. Sometimes I like to add a texture to a drawing, to do so I add the texture in a layer above the drawing, set the layer mode to Multiply and adjust the opacity. Simple and easy.
But now I'm getting this weird "film" of lines appearing in that layer everytime I adjust the opacity, they become even worse when I add color...I use a normal brush and it actually paints lines rather than solid color!
Is there any command within Photoshop to tell it to open all windows within the main window (or bring all open windows to the main window)? If you have dual monitors, then often a new window (say the save jpg quality dialog box, or the layers window, etc) will open in the other screen - that is, the screen in which you do not have Photoshop currently open.
This is not too much of a hassle, unless you have disconnected one of the monitors and the window opens up in that phantom monitor. Then you have no way to get to it. I usually resolve this by reconnecting the monitor.
But in this case that hasn't worked. When I choose "Image -> Canvas Size" the window opens somewhere, but I can't find it. I've moved my external monitor into every position possible relative to my primary screen (through Windows display settings) and I can't find the canvas size window anywhere. Code:
Whilst editing images in photoshop cs3 (using power mac), random horizontal lines are appearing on images. Usuall just one or two and the only way to get rid of them is to edited/erase them out....
I have tried saving and opening image on another mac and it still shows up...
As you will see from my image, when I use Free Transform in Photoshop CS5 black lines appear around the outside of my image. I am using an image (of the people) with a black mask sitting on top of a main black background. They are the exact same colour black 000000
View 9 Replies View RelatedI Keep having this reoccuring problem today - white lines keep appearing attatched to certain & all layers in photoshop files that I have, the only solution that seems to get rid of them is to put a mask on the layer and mask the line away, these are appearing on text, smart objects & rastersized layers.
They were not there when I previously saved the file and they should not be there now, I then went to open another file I had and white lines started to appear on the files. This is really frustrating because some of the website documents have alot of layers. I have attatched an example below, they only appear to be 1 pixel and can range up to 2500pixels wide and they overlap making the line look thicker sometimes.
I was making a drawing and i don't know what i did but now anything i draw is not visible on screen although it is actually there because i can select it.
View 2 Replies View RelatedAny one deal with lines that appear to the right of each line that is drawn? For example if I draw a vertical line I get a line at the start point and the end point that display off to the right 2 cm or so. Zoomed in or out, always about 2 cm. After about 15 minutes, every line does this. Pretty bothersome. I thought it was a graphics card but the blocks in my drawings go off to the right in which they were created. So if the block is rotated, these little 'tails' rotate with it.
I tried some troubleshooting - Reinstalling/updating graphics card driver, switching monitors, but no luck.
I have 8gb of ram on a windows 7 Bit system, and have an Autodesk/AutoCAD certified graphics card - an AMD FirePro 3900 (ATI FireGL). You'd think that this 'certification' would prevent problems like this. What do I know.
On a side note, Draw Order > send to back/send to front does not appear to work either on my display.
I am using vanilla autocad 2011. installed from the autocad mechanical suite. I keep having a problem when copying blocks, leader lines and text, they sometimes apear bold in paper space. I have used the trick of changing the Z dimension from 0 to 1 and back to 0. My leader lines do not have the ability to do that. How can I keep this from happening. Autocad 2010 never had this isssue. Attached is a capture of the problem, you will see the bold text.
View 3 Replies View RelatedI'm having a problem with "phantom" lines appearing in PDF plots.
The Situation:
The firm I work for often uses Excel tables in Autocad LT 2013. I have learned through experience its better to use a linked table, but in this situation only paste special is an option due to time constraints.
Basically when we try to plot a DWG with tables specially pasted in the drawing space phantom lines appear.
But only when we try to convert to PDF. In the plot preview everything is fine, but when the PDF is created vertical lines appear in the tables on the actual PDF.
I've tried many different options to fix this but so far the only thing that has worked is, converting the DWG to a DWF and opening in Design Review. From there I plot to PDF and everything is fine, no lines appear.
In the DWG I have tried tweaking the Plot Quality for the "pasted" tables to no avail.
I have a linetype that is a drain line so it's dashed and has a "D" within it along with an arrow pointing in the direction of flow. The drawing I have contains many of these lines ehich display properly in the viewport meaning you can see the dashes, D's and arrows.
Problem is, I got an as-built from a contractor as pasted it into my drawing. His lines look fine in my model space, but in my viewport the lines appear solid and you don't see the dashes, D's or arrows. I tried MATCHPROP to make the contractors lines match my existing lines but that did not work. I tried andjusting the linetype scale but that doesn't work either.
I have a problem with a File in Autocad.
We have a dynamic block here at work that has a solid hatch in it. It is a simple block which only utilizes a dropdown menu.
This block is a circle with a solid hatch in it. However when I select the block via dropdown menu, the hatch is not solid, it is a bunch of lines originating from the center of the circle.
I have never had this problem before with this block and nothing has changed with the block.
It also works fine when I open up other drawings.
This tells me that there is a problem with the settings of this specific file but I cannot figure out what setting.
I believe the problem occurred because I brought my work home with me and I have different settings on my autocad (both ACAD 2011).
A coworker is trying to publish a bunch of drawings to dwf and is having problems with the linetypes. Essentially, after publishing, the hidden lines are showing up dashed in some drawings and solid in others. We've tried setting the ltscale to 1 and the psltscale to 0. We are using AutoCAD 2007. Additionally, when we look at one tab in paperspace, the lines look correct, on another, the dashes look smaller. I'm at a loss as to what to do.
View 3 Replies View RelatedJust installed the new CS6. I'm experimenting with Illustrator. I feel a little dumb asking this, but ALL of my newly drawn paths, brush strokes, objects etc. keep automatically shifting to the bottom of the layer instead of like usual, appearing at the top. Is there a way to turn this off? Revert back to normal?
View 2 Replies View RelatedI just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
View 6 Replies View RelatedI used PENZD file that has 8 points (4 locations with 2 depths in each location) to create a Point dwg that has several annotations I made. Then I used the
"Lines/Curves" => "Create Lines" by "Point # Range" to create 6 sets of lines:
Line Set #1 that connects Points 1-3-5-7-1,
Line Set #2 that connects Points 2-4-6-8-2,
Line Set #3 that connects Points 1-2,
Line Set #4 that connects Points 3-4,
Line Set #5 that connects Points 5-6,
Line Set #6 that connects Points 7-8.
The annotaions for the 8 points are gone, after I completed the creation of the Lines. I wonder whether I can create 2 layers in the AutoCAD Civil 3D 2013: 1 layer for the 8 points with my annotations attached and 1 layer for the lines I created from the 8 points.
1.How to make the vertical color lines in the picture below to be symmetric?
2.I would like to know how to make those lines on a layer like in the picture below,
Attachment 16845
How do I create multiple lines of text in a single layer. Everytime I finish with a line and want to go to the next, I hit 'Enter', but that completes the text. If I click on the layer image again, then it creates another layer.
So basically if I have 10 lines of text, I end up with 10 layers of text as well. Needless to say, this becomes to much trouble if I have to center each line of text and add blending options to 10 layers instead of one.
Is there any way of removing the lines that go around the edge of a blank layer? I'm making a design which has a black background where I need to experiment by moving other layers around, and I keep getting the faint outside edge of the layer showing. For example, I created a transparent layer to create a supa nova; I move the layer around the black background and get the faint outside edge of the layer.
Is there anyway of getting rid of these besides maybe using the clone tool?
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedI was wondering if it is possible to measure the total length of lines I have in one layer without using the measure tool on each individual line. In searching other posts a lot of answers reccomend using LISP. Since I am not familiar with LISP at all and haven't purchased the add on is there a simpler way using AutoCAD LT?
View 2 Replies View RelatedFor whatever reason cad won't let change layer colors once there are lines on it. You change the color and when you close the layer dialog box and layer color doesn't change......
I have Acad2012 LT
I have an XREF that I want the lines to appear has color 253.
I go into layer properties and override the layer colors to 253. Some of the lines in the XREF change to 253. Other lines don't because they are not "By Layer" in the xref file.
Is there a setting in autocad that will override these lines that are not "by-layer"?
How can I add a layer of horizontal and vertical guide lines? I can't seem to find that option.
View 2 Replies View RelatedI make parcels in a base dwg and make separate layers for each parcel and labels moving them off the default layer zero.
i xref the base and then try freezing all the parcel layers and the go away but i am left with a copy of the parcel lines on xref layer zero with no control over it.
After "copyclip" command -no matter you use ctrl+c or type into the command line- color of all lines inside "Layer 0" with By Layer color property change to White. Other layers and color remains the same. If I change color property of "Layer 0" form "By Layer" to a specific color such as red, yellow they are also remain the same.
I am using Autocad 2009 64 bit.
We like to put our dimension lines in CorelDraw 5 on separate layers from the objects being dimensioned. This way we can turn the dimensions ON/OFF depending on our needs. Unfortunately, we find that the dimensions for these objects do not move with the objects on the other layer. We have also found that certain edit operations seem to break the link between the objects on one layer and their dimensions on another layer.
How we can maintain our dimension lines on one layer, the objects on another, and prevent the problems described above?
What I am wanting to do is select objects or object mouse and use a keyboard shorcut to change those objects to a layer that is frozen. The layer is called "AS-BUIILT DELETED"
View 6 Replies View RelatedI created sample lines and section views for my road projects. I set all line works to appropriate layers except for "Segment and Points". Cannot change from layer "0".
I right click the existing grade on my section views, click "edit section style", click "display", then change the layer of Segments and points and click "OK", "apply".
Go back to my drawing, verify the layer but still layer "0". I tried so many times, read the manual, call friends but no luck. I am tempted to "explode" my drawing.
I'm have been using Photoshop CS2 for the past year and suddenly I am no longer able to see text that I type.
The background is white, the text colour is black, I'm on the top most layer (actually right now I'm on the only layer), the font size is big enough and is a Photoshop friendly found (basic Arial Black).
When I click on the document to create the text, a black square is coming up but I can't see the cursor, or anything I type.
these weird lls keep showing through.It is all over my psd file and when saved they show us as well.This is photoshop CS6
View 7 Replies View RelatedI have a license for Photoshop CS4 Extended (Windows) and for some reason whenever I install it the software appears to be installing as regular non-Extended CS4. At least, the 3D menu items don't appear, and when I go to "About Photoshop" it doesn't say extended.
I have double-and triple-checked that my serial number and license are for the Extended version. It says it right there on the package, on the CD, and on the sticker with the Serial Number.
I had to wipe my machine and re-install everything recently, and now it's not showing up. Is there something else I need to do when installing? Is there some hidden option I need to turn on?