Just installed the new CS6. I'm experimenting with Illustrator. I feel a little dumb asking this, but ALL of my newly drawn paths, brush strokes, objects etc. keep automatically shifting to the bottom of the layer instead of like usual, appearing at the top. Is there a way to turn this off? Revert back to normal?
View 2 RepliesI have just finished designing my characters. Now I have to create my background. I figured to do this, I would simply have to create my background and hide the layers above so I can see what I'm doing. However the few lines that I've created in my background are overlaping the characters, how can I resolve this?
Also after doing a brush or creating a path in general, how do i I deselect it (instead of having to bring out the selection tool and clicking anywhere on the screen)
I jut remembered something else, if i want to select an object but the selection rectangle covers the perimeter of another object, how do I avoid selecting the other object aswell?
I am creating a new block that includes text, lines and a solid object. The block is creating properly, however, the linework is behind the solid object.
How do I control the draworder of the items in the block?
Is there a way to set the order before I create the block, OR do I have to modify the block after I have created it?
When creating the first new layer via copy in Ph6, it is always locked to the background layer. A small but inconvenient feature.
View 6 Replies View RelatedI'm using a Wacom intuos 2 and working up some illustrations, but whenever I create a new layer, the brush tool goes completely defunct and makes absolutely no marks on the document. I have gotten in the habit of just restarting Photoshop, and then it works.
View 3 Replies View RelatedI'm having a bit of a problem struggling with creating new dimension style using vee bee dot net, in AutoCAD 2010 environment. I am particularly trying to figure out how to set the newly created dimension style to color white, and to assign it a specific layer (for example, a layer called "test"). What the code syntax is to accomplish this?
I post the code below for what I have done thus far:
Public Shared Sub addDimensionStyle(ByVal strDimStyle As String)
Dim acDb As Database = HostApplicationServices.WorkingDatabase
Using acTrans As Transaction = acDb.TransactionManager.StartTransaction()
Dim dimTbl As DimStyleTable = acDb.DimStyleTableId.GetObject(OpenMode.ForWrite)
Dim dimTblRec As DimStyleTableRecord = Nothing
[Code] ........
I spent a bit of time creating a brush style to simulate a rope. Artwork was created, dragged and dropped into brushes pallet, set as pattern brush. In the AI file in which the brush was created, it is visible and available as a brush when "Show pattern brushes" is checked. However, in other AI files I cannot find this brush! I have closed all files and closed AI, reopened and still nothing.
Ubiquitous information:
Adobe Illustrator CS6 version 16.0.3 (32-bit)
Windows XP sp 3 OS
Is there any way through which we can get the art handle of a newly created art, just after its creation on the document?
View 1 Replies View Relatedwe have a good size project going on with lots of view ports of a base map (floor plan or site plan). Then we set the viewport layers the way we would like it, but along the way, we keep getting updated base maps (floor plan or site plan) with new layer created in them. These newly created layers are for the originator and will not affect our project.
Is there a way to have our project set to ignore any newly created layer from the originator of the base files? That is, we have our project (viewport layers) set the way we want it. When we get an updated base file, replace the xref(s), our layer state will still be the same, ignoring any newly created layer, automatically. I sure hope I am clear enough here.
Our problem is that when we get a new base file, then we would have to go to every file that has a viewport related to this new base file and turn off the new layers.
AutoCAD 2014
I used to use freehand as my defacto drawing tool until I switched to AI. Back in those days, I also used "Streamline" (URL...) to perform the functions image trace does today. While it's results were somewhat crude, the software provided me the vector points, paths and acnhors i needed. After every trace, I could manually edit the resulting vector traces.
I have been using CS6's tracing feature, but the one thing I cannot figure out for the life of me is the "Bounding box" issue for an imported image. Everytime I trace a drawing, AI's tracing results always place a bounding box around the traced image area. My goal: To trace an item, get rid of the bounding box and extract the outlines and paths so that I can then modify these to my linking.
Can this be done? Im sure it can,... I just cannot find out how. (Or am I making crack wishes?) All I'm saying, if Streamline allowed me to edit paths from a trace, then it'd be a shame if AI CS6 does not.
I am having an issue with trying to get and xref or multiple xrefs attached/overlayed in a drawing that I just create.
I have a command that will create a sheet set, then add sheets in that sheet set based on a number the user puts in.
I then ask the user if they want to add xrefs to the drawings, if they press yes, I want to have the dwgs that are selected by the user to be referenced into the newly created dwgs.
I believe I am mising making the dwg that is created the active dwg before adding the xrefs, but I may also be missing locking the dwg. At the moment I have it set to open the dwg after it is created then attempting to add the xrefs to it.
'Starts the process of adding sheets based on the number specified
For i As Integer = 1 To info.TotalSheetNum.Value
'shows dialog box for sheet information to user
sheetinfo.ShowDialog()
'adds the sheet to the sheet set
[Code] ...........
I have two objects intersecting each other on different layers. The object on the top layer I reduced the opacity for and the bottom layer which was previously hidden now is shining through. I do not want this to happen. I want the bottom layer to remain hidden beneath the top layer despite the lowered opacity. How would I accompish this simply? I have CS2.
View 6 Replies View RelatedHow can I get the object id of the just created entity.
acTrans.AddNewlyCreatedDBObject(acPoint, true); acTrans.Commit();
Selected the point on the dwg with PromptPointResult result value and added it.
Then I want the objectid of this acPoint, to do my next operation.
I'm having trouble with a logo I've created in an svg. file. I seem to have to finalized, but when I save it as a pdf. to take it to the printers I see parts of the logo suddenly have no stroke or stroke has been added in other parts.
I don't seem to have any hidden layers I don't think. I'm not sure if there is a setting to change in the window that gives you all the options to choose from when you're saving something as a pdf. Or is there a setting I should be activating when finalizing this logo as an svg that prevents such problems. I'm pretty new to illustrator, before this I was using inkscape which I got the feel of until i decided to go pro with illustrator.
I've constructed a logo that consists of several shapes that but up against each other. The sides that touch one another are completely flat. When I zoom in, the objects are touching, if not overlapping in some cases. This is okay as it is very small.
However when I save it as a pdf document to sent to a client, those thin lines between the shapes appear much more pronounced. It looks as if I have intentionally put a .5 stroke line between each object.
SInce upgrading from LR4 to LR5 I can no longer create a new folder in the 'destination' section of the import pane and import new images into it.
If I right-click, for example, the desktop in the 'destination' area and select 'create new folder' I can create the folder, but it doesn't then show when I return to LR for the import. I have to have already created to folder outside of LR before the import for it to show as a viable location to import to.
When I create a new watermark it will not save and gives an error.What can I do about this?
View 1 Replies View RelatedI have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
I don't know if this is possible at all in Illustrator, but I want to align objects to text paths. Look at the following example.
I start with something like a circular hierarchy, that I get as an output from another program. These are only lines and text. Now I want to add a flag behind the text. This flag should have the same orientation as the text path.
As this hierarchy is actually pretty big (this is only a snippet), I don't want to rotate all the flags manually. I tried to do it manually with the below example, but it still doesn't looks right...
Is this a proper method to rotate the flags according to the orientation of the text paths in Illustrator?
Being new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies View RelatedAfter doing a live trace and expand on an object I now need to separate one object into two. I tried using both the scissors and the knife tool and neither tool work. When I select two anchor points on opposite side of each other to split the object it just adds a line in the middle with the object as a whole still in tact.
View 13 Replies View RelatedWhen I have made a logo and there's mutiple parts and I want to center it, it messes all the parts up. How do I center it while keeping the shape without combining it all? Example in photo: [URL]
View 12 Replies View RelatedI have one point paths in my AI drawing. How do I find all of them and delete them quickly?
View 15 Replies View RelatedI organize my documents into different layers. The problem that I'm facing is that the paths jump places when I paste. If I want to move a set of paths into another layer, I cut and paste. But the paths either paste in front of the layer it started on, or on a layer other than where I commanded them to be pasted. I'm looking into pasting a set of paths in a layer by my choice, but it keeps on wanting to do its own thing. Also, I do know that layers can be clicked and dragged into different positions on the layers palette, but I have so many. This technique slows me down.
View 3 Replies View RelatedIn AI, smart guides indicated "intersection" when I am drawing a path or moving an object to align to the intersection of two guides, when I release the mouse, the object I am moving/drawings jumps slightly off the intended alignment intersection. If I continue to try to move it to align, it jumps to the other side or back to where it was but will mot match the intersection.
View 4 Replies View RelatedI want to create an illustration with black outlines. Within these outlines I want to have some spots without outlines that stay clean within the lines. I have tried 3 options so far and have found a solution but it's far from ideal.
1. Create clipping masks for each element that has a spot on it and assign a stroke to the clipping path again after. However by creating the clipping path, the path styles dissapear. In this case I want to keep the pointed ends to the open path outlines (see top image).
2. Draw in the lines where the spots are and create a live paint object of the entire illustration. Then paint in the spots and other areas. However when I create this live paint object the lines again lose their applied styles and even 'end' at each intersection, creating nasty edges where the lines should go 'underneath' smoothly (see bottom image).
3. The option Im using now. Duplicate the path outlines and create clipping masks for the spots without strokes. Then put the stroked outline with the desired styles on top. The problem with this is that I have almost twice as much elements in my illustration now than I actually 'need'. And the styled outlines are not connected with the color underneath, so its very easy to accidentally move something around...
Any easier way to create this effect without all the hassle?
I'm a keen amateur on the computer and run my own construction company. We currently have a steel ruler as our logo, but I'm trying to get a spiral staircase also. Not sure if two logo's is allowed; the steel ruler has our company name imprinted on it and I thought it was cool way to display our name. Probably severley faultered from a pro.
Was hoping to find some vector art of a helical staircase but not much out there. So we made a couple of beautiful helical stairs for a client, and I'm trying to trace that and use it as our logo also.
I'm tracing it in vector art because we have a Roland GX24 vinyl cutter and I'm making my own banners etc.
I have three queries:
1: The pen is showing up some strange invisible paths which only appear in the plugin cutstudio (where I haven't closed the paths off I presume?). How can I get the paths to be as drawn?;
2: When I go to cut this, the vinyl cutter will treat the paths as single slices. This design will be as if drawn, so I will want a way of creating two paths to the strokes, probably 2mm width apart. That will then leave a piece of vinyl 2mm in width so when I peel off, the vinyl will stay there; like a pen stroke of a handwritten drawing.
3: What snapping should I be using? I've always had problems with points or paths not being snapped together perfectly. The cutter will end up cutting some of the other adjoining 2mm vinyl and after time this will cause the vinyl to peel off.
I create with VBA an Illustrator sheet with custom size:
'define size
Dim B_cust, H_cust As Integer
Set appRef = CreateObject("Illustrator.Application")
B_cust = CInt(InputBox("B=", "Higth:"))
H_cust = CInt(InputBox("H=", "Width:"))
Set newDocument = appRef.Documents.Add(aiDocumentCMYKColor, B_cust, H_cust)
This works fine
I would have fore each new document the same layer order like
cadsymboltext
Rem ###new Layer###
Set myDoc = appRef.ActiveDocument
Set myLayer = myDoc.Layers.Add()
Set myLayer.Name = "cad"
I'm not able to rename the created layer ?
Furthermore I would erase the default Layer LEVEL 1
Why combine objects together cut bottom side of combined objects?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
Problem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.