Photoshop :: Unlock Newly Created Layer
Aug 13, 2002When creating the first new layer via copy in Ph6, it is always locked to the background layer. A small but inconvenient feature.
View 6 Replies
ADVERTISEMENT
Photoshop :: CS6 Bug - Can't Use Brush Tool On Newly Created Layer
May 18, 2013I'm using a Wacom intuos 2 and working up some illustrations, but whenever I create a new layer, the brush tool goes completely defunct and makes absolutely no marks on the document. I have gotten in the habit of just restarting Photoshop, and then it works.
View 3 Replies View RelatedAutoCAD .NET :: How To Set Color Index And Layer Of Newly Created Dimension Style
Jul 18, 2013I'm having a bit of a problem struggling with creating new dimension style using vee bee dot net, in AutoCAD 2010 environment. I am particularly trying to figure out how to set the newly created dimension style to color white, and to assign it a specific layer (for example, a layer called "test"). What the code syntax is to accomplish this?
I post the code below for what I have done thus far:
Public Shared Sub addDimensionStyle(ByVal strDimStyle As String)
Dim acDb As Database = HostApplicationServices.WorkingDatabase
Using acTrans As Transaction = acDb.TransactionManager.StartTransaction()
Dim dimTbl As DimStyleTable = acDb.DimStyleTableId.GetObject(OpenMode.ForWrite)
Dim dimTblRec As DimStyleTableRecord = Nothing
[Code] ........
Illustrator :: CS6 - Newly Created Paths / Objects Appearing At The Bottom Of Layer
Jul 31, 2012Just installed the new CS6. I'm experimenting with Illustrator. I feel a little dumb asking this, but ALL of my newly drawn paths, brush strokes, objects etc. keep automatically shifting to the bottom of the layer instead of like usual, appearing at the top. Is there a way to turn this off? Revert back to normal?
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Layer State - Ignore Any Newly Created Layers?
Aug 8, 2013we have a good size project going on with lots of view ports of a base map (floor plan or site plan). Then we set the viewport layers the way we would like it, but along the way, we keep getting updated base maps (floor plan or site plan) with new layer created in them. These newly created layers are for the originator and will not affect our project.
Is there a way to have our project set to ignore any newly created layer from the originator of the base files? That is, we have our project (viewport layers) set the way we want it. When we get an updated base file, replace the xref(s), our layer state will still be the same, ignoring any newly created layer, automatically. I sure hope I am clear enough here.
Our problem is that when we get a new base file, then we would have to go to every file that has a viewport related to this new base file and turn off the new layers.
AutoCAD 2014
AutoCAD .NET :: Add Xref To Newly Created DWG?
May 18, 2012I am having an issue with trying to get and xref or multiple xrefs attached/overlayed in a drawing that I just create.
I have a command that will create a sheet set, then add sheets in that sheet set based on a number the user puts in.
I then ask the user if they want to add xrefs to the drawings, if they press yes, I want to have the dwgs that are selected by the user to be referenced into the newly created dwgs.
I believe I am mising making the dwg that is created the active dwg before adding the xrefs, but I may also be missing locking the dwg. At the moment I have it set to open the dwg after it is created then attempting to add the xrefs to it.
'Starts the process of adding sheets based on the number specified
For i As Integer = 1 To info.TotalSheetNum.Value
'shows dialog box for sheet information to user
sheetinfo.ShowDialog()
'adds the sheet to the sheet set
[Code] ...........
Illustrator :: Newly Created Brush Not Available?
Feb 28, 2014I spent a bit of time creating a brush style to simulate a rope. Artwork was created, dragged and dropped into brushes pallet, set as pattern brush. In the AI file in which the brush was created, it is visible and available as a brush when "Show pattern brushes" is checked. However, in other AI files I cannot find this brush! I have closed all files and closed AI, reopened and still nothing.
Ubiquitous information:
Adobe Illustrator CS6 version 16.0.3 (32-bit)
Windows XP sp 3 OS
Illustrator SDK :: How To Get Art Handle Of A Newly Created Art
Aug 1, 2012Is there any way through which we can get the art handle of a newly created art, just after its creation on the document?
View 1 Replies View RelatedAutoCAD .NET :: Get Object ID Of Newly Created Entity
Dec 5, 2012How can I get the object id of the just created entity.
acTrans.AddNewlyCreatedDBObject(acPoint, true); acTrans.Commit();
Selected the point on the dwg with PromptPointResult result value and added it.
Then I want the objectid of this acPoint, to do my next operation.
AutoCAD .NET :: Draworder Of Objects In Newly Created Blocks
Nov 12, 2012I am creating a new block that includes text, lines and a solid object. The block is creating properly, however, the linework is behind the solid object.
How do I control the draworder of the items in the block?
Is there a way to set the order before I create the block, OR do I have to modify the block after I have created it?
Lightroom :: Cannot Import Into Newly Created Folder Since Upgrade
Nov 27, 2013SInce upgrading from LR4 to LR5 I can no longer create a new folder in the 'destination' section of the import pane and import new images into it.
If I right-click, for example, the desktop in the 'destination' area and select 'create new folder' I can create the folder, but it doesn't then show when I return to LR for the import. I have to have already created to folder outside of LR before the import for it to show as a viable location to import to.
Lightroom :: Cannot Save Newly Created Watermark - Gives Error
Dec 24, 2011When I create a new watermark it will not save and gives an error.What can I do about this?
View 1 Replies View RelatedAutoCAD 2010 :: Apply Match Properties To Newly Created Multileader?
Aug 8, 2013I have a drawing with exsisting multileaders in it.
I am trying to apply the match properties to a newly created multileader but it isn't working.
Photoshop :: How To Unlock A Layer
Nov 25, 2013Windows 8 64bit - Ps C i have an image from a client and it's just one Layer but it's locked and i would like to be able to unlock it and also to add a new layer above it which i am also unable to do.
why this is?
i know i can re-save it so that i can add a new Layer at least but i am still curious as to why i can't unlock the Layer.
also, i am building a package of images to sell. I have Locked the Layers but still want the people that (hopefully) buy them to be able to unlock them -
is this not something i can do? must i leave all Layers unlocked? for the most part i have only done so to keep particular aspects of the images safe from being altered by new users of photoshop etc.
Photoshop :: Unlock Layer
Mar 9, 2008In Photoshop 7 how do you unlock the background layer?
View 23 Replies View RelatedPhotoshop :: Unlock A Layer
Jul 15, 2004I have a .psd button that has a lot of drop shadow and other affects on it. Somehow this layer has become locked.
There is the little padlock beside the layer name with the popup "Indicates layer is partially locked."
I need to change the text and color of the button, but I can't. Is there anyway to unlock the layer so I don't have to try to create a whole new one? The Lock: menu at the top of the layers tab is all greyed out (inactive).
AutoCad :: Newly Created Viewport Blanks Out Another Viewport
Jan 23, 2013Problem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
Photoshop :: Locked Layer - How To Unlock
Mar 13, 2013one layer in a photoshop document has a padlock on it; no clue how it got there. I can't make it go away; perhaps the method is different in CS6 than in previous versions...
Any clue about this? I can't fill a selection on this particular layer...don't know why. The layer in question IS selected, and the selection is active, etc.
Photoshop :: How To Unlock A CS6 Extended Layer
Aug 29, 2012How do I unlock a CS6 extended layer?
View 2 Replies View RelatedPhotoshop :: How To Unlock Background Layer
Apr 1, 2013How do I unlock the background layer?
View 7 Replies View RelatedPhotoshop :: Logo Unlock Layer
Apr 13, 2011I am familiar with art explosion. Anyway, I recently had someone design a logo and I wanted to edit a few things on it. My problem is I downloaded that free trial of photoshop cs5 and the logo is showing up on one layer. I've tried everything to get it ungrouped or unlocked. Every tutorial just mentions unlocking the background but doesn't say anything if you have multiple objects in one layer. It has three oval shapes and the words for the business on it and another image. I'm hoping to ungroup it all but I've tried to do that and I am not able to choose ungroup or unlock because it won't let you. What are the steps for someone who doesn't really know this program to get all of the components of the logo separated. The guy apparently designed it in photoshop so I would think it would be a no brainer and I'm surprised I'm having to struggle this much to get it undone. It's a psd file.
View 2 Replies View RelatedPhotoshop :: Cs2- How To Unlock A INDEX Layer
Sep 13, 2008i need to unlock this index layer..with this layer locked iam unable to glide it over to another psd file..
View 2 Replies View RelatedPhotoshop :: Can't Unlock Background Layer Using...
Apr 20, 2008I installed CS3 a few days ago (though I'm an experienced CS2 and Photoshop 6 user) and opened Photoshop CS3 Extended today for the first time.
The problem I'm having is with unlocking the background layer. I read in the documentation and on the Net about double-clicking and renaming the layer (which is what I did in other versions), or creating a new file with a transparent background, but those things aren't working for me in this version.
I opened a tiff file (a logo I want to use as the basis for a new image) but I can't unlock the background layer so I can copy, manipulate or add to it. Everything on the Layers drop-down menu is grayed out, as are the word Lock: and the symbols following it in the Layers window.
I tried creating a new image but when File|New dialog box opens the option to use transparent in the Background Contents dropdown is grayed out, too.
Photoshop Elements :: How To Unlock The Background Layer
Jan 3, 2014I cannot unlock a background in layers, nor did I ever ask it to lock. The next step is a small fire.
View 5 Replies View RelatedPhotoshop :: New Layer Created Below Selected Layer Automatically?
Jun 18, 2013Is there a way to change the functionality of the layers so that when a new layer is created or a layer is duplicated that it automatically is created below the selected layer? I always organize my files with elements at the top of the document at the top of the layers panel and have them in decending order (unless there is a reason for an object to be above another) so that it is easier to navigate the page. Right now this means I spend a lot of time moving layers up and down which gets rather annoying. I believe I saw at one point that there is a key command for duplicating a layer below the existing one, but I can't remember how anymore. ability to make a blanket change in preferences.
View 3 Replies View RelatedAutoCAD 2013 :: Block Is Created On Layer 0 Versus A Regular Layer
Nov 14, 2013what does it mean when someone says a block is created on layer 0 vs a regular layer?
View 3 Replies View RelatedPhotoshop :: Created Blending Options To Layer?
Mar 23, 2008I go in blending options and do as he said in "Step 1: Build a Base" but I can't apply my newly created blended options to my layer.
Quote" Once you apply the changes to your rounded rectangle, you will have something that looks like Fig 1-4. "
Can't do that above? My button stays with the original color it was created.
Photoshop :: Relationship Between Layer Mask And Channel That Created It?
Sep 13, 2013Suppose I have carefully made a selection and saved it as a channel. I then use that channel in an adjustment layer as a mask. I also use the inverse of that channel in another adjustment layer.
At this point do I have three separate masks inside photoshop: the original channel, and two others that are layer masks? If I then see that the original mask wasn't quite right so I do a refine mask on one of the layer masks. I haven't, I think, changed the original channel, right? But I'd like to use the inverse of that channel in the other adjustment layer.
This gets pretty messy pretty fast, especially because I'm working on a very large image. After I modify the layer mask should I save it off as a separate named channel (it doesn't seem to be accessible unless the layer it's on is active) and then invert that, save it, and reload it as the layer mask for the other adjustment layer?
Photoshop :: Hangs When Trying To Open Vector-layer Created In Illustrator?
Sep 12, 2013Photoshop CC (Newest update) crashes every time I double-click on a vector-layer created in Illustrator! It should automatically open the layer in Illustrator but all I see is the 'Wheel of Death'!?(OSX 10.8.4 - Adobe CC)
Crash-Log:
Date/Time: 2013-09-12 10:02:42 +0200
OS Version: 10.8.4 (Build 12E55)
Architecture: x86_64
Report Version: 11
[code]...
Photoshop :: Actions Created In CS5 Not Working In CS6 Due To Shape Layer Naming Change
Jul 18, 2012In Photoshop CS5 I created a long action list which include lots of Shapes. I saved these action sets and loaded them into CS6. and they kept failing saying they couldn't find layer "Shape 1" "Shape 2" etc . this is because in CS6 the layers are now called "Rectangle 1" "Elipse 1" etc . How can I get this to revert back to the "Shape 1, 2, 3, 4 etc etc".
View 6 Replies View RelatedIllustrator Scripting :: How To Rename The Created Layer
Sep 27, 2012I create with VBA an Illustrator sheet with custom size:
'define size
Dim B_cust, H_cust As Integer
Set appRef = CreateObject("Illustrator.Application")
B_cust = CInt(InputBox("B=", "Higth:"))
H_cust = CInt(InputBox("H=", "Width:"))
Set newDocument = appRef.Documents.Add(aiDocumentCMYKColor, B_cust, H_cust)
This works fine
I would have fore each new document the same layer order like
cadsymboltext
Rem ###new Layer###
Set myDoc = appRef.ActiveDocument
Set myLayer = myDoc.Layers.Add()
Set myLayer.Name = "cad"
I'm not able to rename the created layer ?
Furthermore I would erase the default Layer LEVEL 1