After doing a live trace and expand on an object I now need to separate one object into two. I tried using both the scissors and the knife tool and neither tool work. When I select two anchor points on opposite side of each other to split the object it just adds a line in the middle with the object as a whole still in tact.
View 13 RepliesSo apparently:
Create a path snapped to pixel.
Disable align to pixel on all paths.
Select the entire path and create a new symbol with align to pixel disabled OR (it makes no difference) create a new symbol from a temporary path and then paste in place. Everything looks good. Paths are aligned to pixel.
Exit isolation symbol mode.
Go back into isolation mode.
All your paths are offset by miniscule amounts causing them to bleed into each other. You can't realign your paths with snap to pixel because snap to pixel doesn't work for a set of paths because it snaps to a random path or something.
Or you can enable align to pixel and have the copy paste completely mess up your paths.
Why would you expand paths that are snapped to pixel by a miniscule amount on a paste?
Is this fixed in CS6?
saving back from CC17 to CS6 changes all complicated brushes into expanded objects. Also brushes vanished from brush pallet
View 3 Replies View RelatedI have hundreds of shapes filled with a pattern of lines. I am trying to figure out a way to clip the lines without ending up with the lines that have been converted to (outlines) closed shapes. It seems like a simple proceedure but Illustrator keeps converting them to closed shapes whenever I try any type of clipping or cropping technique.
I have attached a screen shot showing an example of the shape with tthe line.
I am having some trouble with a file in Illustrator CS6. Within a layer, when I add a fill to an object, the fill doesn't block out the object paths beneath. For instance, say I have a square object overlapping a circle object in Layer 1. The square object is above the circle in the layer. When I add a fill to the square, the circle stroke still shows through the square even though the overlapped part should be blocked out by the fill. The square is set to normal visibility, and I have made sure that there are no duplicate paths that would account for what I am seeing. (I.e., it's not a case where there's a second identical circle path that is on top of the square, so that it remains visible in spite of the fill.)
Other details:
- I'm mainly working with a white fill, but the problem is the same with fills of any color
- When there's a fill color in the circle path as well, the circle's fill color *is* blocked out—just not its stroke.
- I have restarted Illustrator and restarted my computer and these have not changed anything.
- There are other layers within the same document where the normal layering rules work.
- I tried copy/pasting some of the problem objects into a new document, and in the new document, the fill works properly.
- If I move the problem objects to another layer, then the fill works as it should. But as I'm dealing with a number of paths, it doesn't make sense to create a layer for each to solve the problem.
I can't tell if it's a matter of working in too large or complex a file.
I'm trying to split an existing object into two or three separate shapes (please take a look at the attachment) with CS6. Want to cut it along those white pathes.
View 4 Replies View RelatedI don't know if this is possible at all in Illustrator, but I want to align objects to text paths. Look at the following example.
I start with something like a circular hierarchy, that I get as an output from another program. These are only lines and text. Now I want to add a flag behind the text. This flag should have the same orientation as the text path.
As this hierarchy is actually pretty big (this is only a snippet), I don't want to rotate all the flags manually. I tried to do it manually with the below example, but it still doesn't looks right...
Is this a proper method to rotate the flags according to the orientation of the text paths in Illustrator?
Being new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies View RelatedI have a .pdf output from a program I use at work. The .pdf can be opened in illustrator (IL) and I have about a bezillion of objects which are mostly all paths (0.5 stroke and no fill of course).
Due to the large number of objects, IL crashes after a while.
Is there a way to transform/join the paths from one row into one object? I tried rasterize, but the problem is that I can't change the color of the according row afterwards - and I need to be able to change the color later.
Stuff I tried that didn't work"
- Object>Paths>clean up
- Object>Paths>simplify
When I have made a logo and there's mutiple parts and I want to center it, it messes all the parts up. How do I center it while keeping the shape without combining it all? Example in photo: [URL]
View 12 Replies View RelatedI have one point paths in my AI drawing. How do I find all of them and delete them quickly?
View 15 Replies View RelatedI hope I'm using the right terminology here... imagine a square drawn by Pen tool. A square with a stroke and fill. What I would like to do is to "none" colour two opposite sides (strokes) of the square while keeping the fill color inside. What is the best way (or any way for that matter) of doing this?
View 5 Replies View RelatedJust installed the new CS6. I'm experimenting with Illustrator. I feel a little dumb asking this, but ALL of my newly drawn paths, brush strokes, objects etc. keep automatically shifting to the bottom of the layer instead of like usual, appearing at the top. Is there a way to turn this off? Revert back to normal?
View 2 Replies View RelatedIn AI, smart guides indicated "intersection" when I am drawing a path or moving an object to align to the intersection of two guides, when I release the mouse, the object I am moving/drawings jumps slightly off the intended alignment intersection. If I continue to try to move it to align, it jumps to the other side or back to where it was but will mot match the intersection.
View 4 Replies View Related.... so as to be able to apply a fill over the whole object??
This might sound more obvious than it actually is in this case so i'll explain. My partners artwork contains a lot of linework and unfortunately, i can't get the degree of accuracy i need with a continous path. Therefore, the problem i have is joining lots of paths (some of which have endpoints joining midway through other paths) to make a single object with the strokes preserved, so i can apply a fill to the overall object or to individual sections.
I've tried unite, join and all the other commands that i'm aware of but all give undesired effects. I've tried using a compund path but all that does is make them act as one but still doesn't do what i need with regards to filling the object.
A simplified example of what i need to achieve is this...... create a square using 4 seperate paths and then a cross through the middle using more seperate paths to create a 4 box square. I need to be able to make this one object so i can fill each individual square a different colour if need be?
I want to create an illustration with black outlines. Within these outlines I want to have some spots without outlines that stay clean within the lines. I have tried 3 options so far and have found a solution but it's far from ideal.
1. Create clipping masks for each element that has a spot on it and assign a stroke to the clipping path again after. However by creating the clipping path, the path styles dissapear. In this case I want to keep the pointed ends to the open path outlines (see top image).
2. Draw in the lines where the spots are and create a live paint object of the entire illustration. Then paint in the spots and other areas. However when I create this live paint object the lines again lose their applied styles and even 'end' at each intersection, creating nasty edges where the lines should go 'underneath' smoothly (see bottom image).
3. The option Im using now. Duplicate the path outlines and create clipping masks for the spots without strokes. Then put the stroked outline with the desired styles on top. The problem with this is that I have almost twice as much elements in my illustration now than I actually 'need'. And the styled outlines are not connected with the color underneath, so its very easy to accidentally move something around...
Any easier way to create this effect without all the hassle?
I'm having problems getting what I want on Illustrator CS6. This is the shape that I'm working on: [URL]
I got two paths, one for the inner outline, one for the outer. I want this to be one object, looking just like that, where red is the fill, and black is the outline. Simple as that. [URL] - this is what i want.
So, the inner "circle" is not filled with anything, beacause my object is this "frame" outside. But since I have two seperate paths, I'm filling the outer path with colour, and I get:
[URL] the outer filling is red, the outside is transparent, which is good, but the inside is red because the inner path has no filling.
Right, so next I fill the inner path with white and it looks almost good: [URL]
But the inside is not transparent, it's an "illusion" and everything will be great on a white background, but that's not the case.
I want to convert these to paths into one object to behave exactly like I showed in the first image. Red is the fill, black is the outline. And I plan to use gradient mesh heavily on that shape, so that has to work to.
Bad quality, just doing some quick previews on Photoshop.
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.
How do I drag to select over the top of objects without selecting and moving the objects under the mouse when I begin the "drag to select" motion?
View 2 Replies View RelatedWhen I open a file, one or more layer are opened/expanded in the layer tab on the side of the screen. I can close the layer, make modifications, and save; but when I open it up, the layer is always opened.It doesn't happen with every file. But on the files that do have this, it's always like this.
View 38 Replies View RelatedI want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:
View 6 Replies View RelatedI have stacked objects in the layers panel according to the order I want them to be, but somehow one Object Still stays infront of some objects even though it is stacked the lowest in the layers panel. And I have even tried to 'Send it to back', by selecting it and clicking on 'Objects' tab and 'Arrange' in it.
View 10 Replies View RelatedAfter saving a CS6 AI document as CS5 version, and open it with CS6 again, effect like dropshadow has been expanded and no more editable.
You know, using Illustrator CS5 save document as CS4 version is just OK.
(PC 32bit CS6)
I'm playing with the 3D tools in Photoshop CS5 Extended for a friend. He provided an .obj file of a tool part and it opens just fine as a complex, shaded object.
Question: Is there a way to generate simple outlines of the object and export those outlines as paths to Illustrator?
Cannot lock other paths/unlock all paths in symbols?
View 8 Replies View RelatedHow would I put smaller objects inside a 3D object? I made a tube and wanted to fill it with little spheres. How to put the objects inside and shade them to look like they're in there.
View 4 Replies View RelatedI'm looking for a way to draw a single, solid object and then divide that object into multiple objects using the pen tool; not other objects.
Ex: Draw a solid cirlce, use the pen tool to draw lines over said circle (visually creating different shapes), then [do something] with both the original circle and the pen-drawn lines to actually create the new shapes/objects.
I've done this before by placing other OBJECTS over the original object and then using the divide or trim pathfinder toggles, but using other shapes (even the line tool) has its limitations.
I create all of my lineart for illustrations, in Adobe Illustrator. I use the pen tool in combination with the line width tool to create line weight. Once I have completed all of the line work, I select everything and Expand. This results in not having fills for teh areas of the illustration which need to be colored.
From there, what I do is select everything > livepaint > make. I then fill in each area with a base color, using the live paint bucket tool. Once completed, I again select everything > expand. This leaves me fills that I can select indivually to apply gradients and work with directly.
This process works great until I expand the live paint group. After expanding, there is a very thin white border everywhere that two seperate colors meet. This only happens after expanding, it does not happen when it is still a live paint group. I have tried every option in the expand window, and get the same result.
I have exported the completed work in several formats ( .jpg, eps, .png ) and the lines are still there.
I'd like to select an object and have a script select all objects behind that object, within that objects bounds. I believe this is possible with z-order? But I've never worked with Z-orders before
View 5 Replies View RelatedIs there a way to simply select all object directly below an objects?
I found this script here but it doesn't seem to work.
//DESCRIPTION:Select Below
// A Jongware Script
if (app.documents.length && app.selection.length)
{
ypos = app.selection[0].visibleBounds[3];
[Code] .....
Here's an example file. I'm trying to select eveything below the yellow polygon.
This would be very useful in another project with many small objects bunch together below many larger objects. I want to group the small objects that are bellow the larger object together without having to manually select each objects (there are thousands of objects so a script would be ideal).
I saw someone use split extrusion on text so that each character can be modeled independently, but how do you do it with 3 different objects so I can have them rotate independently?
View 2 Replies View Related