I'm trying to split an existing object into two or three separate shapes (please take a look at the attachment) with CS6. Want to cut it along those white pathes.
View 4 RepliesAfter doing a live trace and expand on an object I now need to separate one object into two. I tried using both the scissors and the knife tool and neither tool work. When I select two anchor points on opposite side of each other to split the object it just adds a line in the middle with the object as a whole still in tact.
View 13 Replies View RelatedI want to separate a photo image (A truck in this case) from its background to create a logo. On After Effects it is done with the Robobrush.
View 4 Replies View RelatedMy catalog is too big. How can I move photos from one catalog to another without losing tags etc
View 2 Replies View RelatedI am working on a project, and I have finished tracing everything. I am now ready to color in the objects, but when I fill the shape with color, it does not work. My layer is not locked.
View 2 Replies View RelatedI've been playing around with the gradient map tool, and love the randomize and noise option to give me nice looking gradients for my images.... my question is, is there a way to "extract" or "split" the colors of the randomized map into its separate colors as if I was creating them manually with the "solid" option?
View 3 Replies View Relatedi have 2 square shapes on my artborad. each square shape has its own gradient fill. i would like to merge these 2 shapes to form a single shape. not a groupe of shapes, but a single, flattened (compounded?) object.
the gradient of the first square includes a zero-alpha. the second image is the two shapes simply layered, but i want to basically flatten them together to form one shape.
what steps are involved in merging these shapes to form one shape so that their gradients are unaffected by merging with the other?
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
I need to add rectangle shapes to an existing image.
I tried using the rectangle tool but each time i click on the background option after the rectangle is drawn, it disappear.
The rectangle will only appear again when i select the rectangle shape from the layer panel.
Is there anyway where i can make the rectangle show on the image?
i tried reading up some of the thread posted and i saw some thread mentioning doing something to the path. How is the path used?
I'm not really familiar with using paths and layers, so i need a really layman's term of explaination.
For more info, i actually set the colour of the rectangle fill 100% opacity 100%.
anyway wat is the purpose of setting opacity?
cos i tried ranges between 0 - 100 and there doesn't seem to have much difference.
Is there a way to add new shapes (sdf) to existing shape files? I have shape file with existing parcels and I need to add new parcels to it?
View 9 Replies View RelatedI have a rigged object and I would like to add a blend shape to this rig. Now my blend shape is not for morph animation rather it is for manipulating the original geometry. Put it this way, I modified the original object and I would like to put this new shape in place without changing my rig, or transferring weights or bones. I presume that best would be to put this before the rig deformer so that the bone deformer works on top of it? I am not sure how I should handle or approach this.
View 2 Replies View RelatedI would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedI have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
I do have a problem on SPLIT feature. I cannot seem to apply SPLIT SOLID into an entity/object but, on the other object I am able to apply SPLIT SOLID.
Sketch created using MultiBody and would like to make use of "Make Components" to create an assembly as well as parts.
I have attach a zip file of the ipt. I am currently using Autodesk Inventor Suite 2012.
Is there a command to split a space object?... if so, what is it?
View 2 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedI drew a solid model of a structure in Autocad 2010. By using that model, I want to make a FEM analysis in Sap2000. The problem is that Sap2000 takes only polygon meshes (not solids) in 3d. The question is that how can i make a group of polygon meshes of the solid model that represents the structure.
(Since i am not an expert of Autocad, i will be glad if the solution is explained in a simple language.)
I'm new to 3DS Max and am coming from C4D. How do I separate a poly from an object into its own object?
I have a box which I want to convert all 6 sides/polys to their own object.
Last autumn I took a photo of a rotten apple on some grass, with a tiny flower beside it. I used the regular lasso tool to cut and layer the apple, and then the flower (giving 3 layers). Upon closer reinspection, though, my lasso cut is a little jagged. So, I'm here asking what you guys do to cut out objects!
I am a fan of the magnetic lasso tool, but find that it can often leave very jagged edges when the object isn't clear cut. So, I thought I would be best to resort to the regular lasso tool, just with the photo zoomed in a lot and going little by little. That would be fine, except that I often click too fast from one point to the next, and Photoshop thinks I'm finished and stops the lasso there. That is soo frustrating! Is there any way to go back and edit after Photoshop has 'closed' the lasso selection?
Another thing I sometimes use is the magic wand tool, but as my background is grass, there's no way that I can get it to do what I want. Any suggestions?
I have a vehicle that is made up of about 15 materials (glass, paint1, paint2, chrome, plastic, rubber, etc.). Many of those separate materials are Multi/Sub-object materials.
The client wants a paragraph of fat text embossed into and wrapped around the vehicle. The text will cross over many different materials. Adding a "bump map" to just one material looks great on "that one" material and is all I need but how can I just add a "bump map" to the entire vehicle model at one time? I've tried adding the bump map to several materials but nothing lines up and it is a nightmare. I just need to wrap a bump map around the entire vehicle and have it "bump" whatever material it is over.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
I have built a polygon mesh of an alien and I would like to cover him in armour plating. To do this I selected various faces and extruded them outwards (see picture).
However I would like to be able to select this extrude as a separate object (because I want to texture it differently later on). Is there any way I can extrude to a separate object?
How do I separate colors in the object that is power-clipped?
View 8 Replies View RelatedI made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies View RelatedI've tried to use it, but how to generate the flashing light in a separate object. This is possible because while trying I did it, but now I cannot do it and it does the flashing light in the same layer of the background of the image.
View 2 Replies View RelatedAutoCAD Civil 3D 2009 w/Updates, Windows XP Pro, SP3
I am looking for a tool or routine to automatically add a unique object data ID number to Points or lines of a sewer system, that extract a prefix number from a seperate object data table (a location grid of closed polygons), then add a sequential number to each selected object. For example, 12 manhole points and 3 cleanouts are located with in one grid polygon. The Grid polygon has a coded id like 61280206, I want to be able to select all the MH and CO points in that grid polygon and have the new ID numbers be 6128020601, 6128020602, 6128020603, or to be able to specify the starting number like 6128020621,(for adding new points and continuing the sequence.
Better yet would be a routine that would be able to apply this system to all the points in the entire project area, extract the number from the appropriate grid polygon, and fill the numbers in one operation.
This is for the initial id numbering of a Cities, Sewer, water and electrical system.
I have searched for and found many LISP routines that do some of this (like ODCOUNT, etc), but none that I have seen have the data table extraction abilities. I do have one that works like this and files in the prefix number from a named views. I have several thousand grid cells (880ftx880ft). Perhaps there is a way to use my polygons w/table to create and name views
I'm attaching data to objects (attached data) and I'm unable to get the table option to open in a new window. I tried Field and the value is already set to 1. I'm using Map 3D 2012 .
View 1 Replies View RelatedIs there a way to assign just specific vertices to a bone by selecting a separate part of an object? Like for example, I have a model of a gun which I'm trying to rig now and this gun has two barrels, one obove the other, and each of this barrel needs to be assign to a different bone. Those bones are there, but the problem is that certain parts (vertices) of second barrel are assigned as well to the second bone, which is incorrect. How do I select only part (an element) of an object and assign it to the bone?
View 5 Replies View Relatedso im drawing a 3d object in an isometric view. it is a 3d extruded object. essentially it is an extruded decagonal tube. i have, at the bottom, a line marking the center of the decagon so i can snap to it, draw a decagon for the base, and extrude it. problem is, i go to draw the decagon (or anything, for that matter), and i cant snap to the inside of the solid. autocad will only let me select the face of the object. is this a setting i can uncheck, or do i have to change the way i am drawing this?
View 3 Replies View RelatedI'm trying to achieve simple task, but can't do that. I have a guilloche background made of strokes. I need to cut them by a shape. The visual result i'm tring to achieve is the same as using the clipping mask. However i need to apply the mask to the strokes, and remove everything that is outside the shape. So is there a way of doing that?
Scirssors tool is not an option cos it'll take entire life to cut all the strokes manually. Outline opption in pathfinder is somewhat close, but then it's barely impossible to delete the cutting shape as it gets segmented as well.
My task is to write an automated routine that checks for a certain classification added to Duct objects.
In the classification definition SfB all classification names of the form (XX)X should be altered/renamed to the form XX.X
Defining a Classification object Classfc as Autodesk.Aec.DatabaseServices.Classification my problem is that the property Classfc.Name is readonly.
I have a cycling jersey I am designing. Now I would like to do the following, but I do not know how:
From This:
(I coloured the paths in PS - This is how they are separated)
to this:
HERE is my vector file