Illustrator :: Snapped To Pixel Paths Are Expanded By A Minute Amount On Paste
Dec 8, 2012
So apparently:
Create a path snapped to pixel.
Disable align to pixel on all paths.
Select the entire path and create a new symbol with align to pixel disabled OR (it makes no difference) create a new symbol from a temporary path and then paste in place. Everything looks good. Paths are aligned to pixel.
Exit isolation symbol mode.
Go back into isolation mode.
All your paths are offset by miniscule amounts causing them to bleed into each other. You can't realign your paths with snap to pixel because snap to pixel doesn't work for a set of paths because it snaps to a random path or something.
Or you can enable align to pixel and have the copy paste completely mess up your paths.
Why would you expand paths that are snapped to pixel by a miniscule amount on a paste?
Is this fixed in CS6?
View 4 Replies
ADVERTISEMENT
Oct 6, 2012
After doing a live trace and expand on an object I now need to separate one object into two. I tried using both the scissors and the knife tool and neither tool work. When I select two anchor points on opposite side of each other to split the object it just adds a line in the middle with the object as a whole still in tact.
View 13 Replies
View Related
Mar 22, 2012
I am using the histogram function in PS CS4 for Windows. I am using the magic wand tool to choose numerous "green" elements (for example). As I choose more and more elements, the pixel amount goes up in the histogram table. For some weird reason, when I choose enough elements to hit around 50000 pixels, the amount reverts to 12000 and goes to "cache level 2". I need to be able to have a total of all my elements for the project I'm working on. Is this a memory issue? How can I increase the cache?
View 1 Replies
View Related
Jul 24, 2012
I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
View 23 Replies
View Related
Aug 23, 2012
Is there a trick to pasting a pixel-perfect vector image from Illustrator into Photoshop as a smart object, and not introduce a bunch of anti-aliasing that was not in the original file? My images are perfectly aligned with the pixel grid in Illustrator, and the pixel preview shows them correctly.
This page is useful for dealing with vector shape layers, but the techniques he talks about don't work for smart objects. Strangely, he says he doesn't have a problem with smart objects, but I do.
Here is an example of what I'm talking about: a simple 13x13 pixel image in Illustrator turns to crap in Photoshop when pasted as a smart object (I know an image as simple as this could be pasted as a shape layer, but the real images I'm working with are much more complex, and cannot be pasted as simple shape layers).
I'm using Photoshop CS4.
View 22 Replies
View Related
Feb 7, 2012
Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
View 9 Replies
View Related
Feb 22, 2014
I have a layer with some paths and lines of text. I copied some of the paths and text and tried to paste in another layer or document; the paths are not pasted and all the text becomes a single line. When I copied only the paths, it is pasted correctly. If I copied only the text and tried to paste in another layer or document, all the text becomes a single line.
If I drag the selection from one layer to another using the panel, it works. If I drag the selection from the artboard to another document, it works. But these operations sometimes are not convenient. What I would like is to copy the items, target a layer in another document and paste there. With a large document with dozens of layers and a lot of text the drag and drop solution is not feasible.
View 4 Replies
View Related
Aug 8, 2012
When I drag around vector points of paths they are not constrained to the pixel grid, when the option "Snap Vector Tools and Transform to Pixel Grid" is off. This is the behavior I expect.BUT: When I drag whole paths, they snap to the pixel grid, no matter what. I even have snapping completely disabled.
This is particularly annoying when eg. creating a path for a zipper. I first make a path for the inside of the jacket or whatever, then I make one notch for the zipper and copy it over and over again for all the notches. It's very troubling when these elements snap to the pixel grid, because it's very unprecise then.
View 1 Replies
View Related
Mar 30, 2012
When I open a file, one or more layer are opened/expanded in the layer tab on the side of the screen. I can close the layer, make modifications, and save; but when I open it up, the layer is always opened.It doesn't happen with every file. But on the files that do have this, it's always like this.
View 38 Replies
View Related
Feb 23, 2014
I want to join two paths to create a shape that I can fill but at the same time retain one of the original paths (the red one in the image below). I can copy the path I want to retain but surely there is a more elegant solution. See below for for an illustration:
View 6 Replies
View Related
May 30, 2012
After saving a CS6 AI document as CS5 version, and open it with CS6 again, effect like dropshadow has been expanded and no more editable.
You know, using Illustrator CS5 save document as CS4 version is just OK.
(PC 32bit CS6)
View 16 Replies
View Related
Dec 4, 2012
Cannot lock other paths/unlock all paths in symbols?
View 8 Replies
View Related
Oct 3, 2012
I create all of my lineart for illustrations, in Adobe Illustrator. I use the pen tool in combination with the line width tool to create line weight. Once I have completed all of the line work, I select everything and Expand. This results in not having fills for teh areas of the illustration which need to be colored.
From there, what I do is select everything > livepaint > make. I then fill in each area with a base color, using the live paint bucket tool. Once completed, I again select everything > expand. This leaves me fills that I can select indivually to apply gradients and work with directly.
This process works great until I expand the live paint group. After expanding, there is a very thin white border everywhere that two seperate colors meet. This only happens after expanding, it does not happen when it is still a live paint group. I have tried every option in the expand window, and get the same result.
I have exported the completed work in several formats ( .jpg, eps, .png ) and the lines are still there.
View 3 Replies
View Related
Feb 13, 2014
saving back from CC17 to CS6 changes all complicated brushes into expanded objects. Also brushes vanished from brush pallet
View 3 Replies
View Related
Jan 17, 2013
What I want is this:
1)While selecting multiple objects,
2)a certain script is run. it has an option to input the range of the number of objects that are going to be deselected.
3)The number within the range I inputted is chosen, and the same number of objects are deselected randomly.
Is there any script similar to this?
View 2 Replies
View Related
Sep 9, 2012
With the Artboards feature now available, should i still use InDesign to create a layout for a simple children's picture book with a small amount of text per page? It would be much easier for me to stay in Illustrator. My plan is to create a a pfd book and an ebook for sure - and possibly, later a printed book. I'm completely stumped about how to make the right choice. BTW - I don't plan to produce the ebooks via InDesign but through a simple iPad App that just allows you to lay in a picture and put the text over it.I'm using CS4.
View 8 Replies
View Related
Jan 13, 2013
I am using illustrator for doing some calligraphy and I am not really experienced with this program. I am using a mouse pen with pressure to draw/write calligraphies. My question is, can I change the pressure amount after I drew lines using brush tool. Let’s say I drew a line, it is good but still not satisfactory. I just want to do a little change in pressure amount in some segments –not all the line- on line. Does illustrator give me this option?
View 5 Replies
View Related
Aug 1, 2012
I'm simply creating a word on an artboard "Item #1" at 90pt bold and centered to the artboard. I now want to copy it a couple of times on the same artboard by holding down alt + shift and dragging beneath it to create new copies of the word with the goal of printing this artboard and using a paper cutter to make evenly cut labels.
1. How do I create a consistent amount of space between each label when I drag each copy down?
2. If I already have the labels on an artboard, how can I space them out so that there is an even amount of space between them?
View 3 Replies
View Related
Mar 12, 2013
Any quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies
View Related
Dec 3, 2010
I really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies
View Related
Apr 14, 2013
A grip of a hatch is not snapped to another, In the attached screenshots, I tried to move the indicated grip to a target one but no “sign” for snaps is shown!
The screenshot and the dwg are attached. How these two grips can be snapped?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Jun 5, 2012
Lets say there is a line across my screen and I want to draw another line snapped to it and 90 degrees to it. How? Without measuring the angle of the first line, which is not at zero or 90 degrees. In 12 years I've never known this
View 7 Replies
View Related
Nov 25, 2012
I'm using Inventor 2013 and would like to create a dialog box requesting the parameters for a simple rectangle and be able to snap in an assembly to get the distance for each parameter (width and depth) of the shape. Is this possible with either VBA or iLogic? I just need how to get the value...I can handle the dialog box.
View 5 Replies
View Related
Dec 5, 2012
ACAD LT 2009, Win XP Lately a feature I am used to seeing has quit.Basically when you hover over a point of a line, a little cross mark appears and you can drag out a dashed line from that point which can be snapped to another object. Handy for finding perpendicular intersections. Whatever this is it no longer works. How do I get it back?
View 2 Replies
View Related
Dec 14, 2011
I would of thought that changing the justify location to an object would change its position when copy and paste...
i copy and paste ALLOT, when i do i utilize reference points so everything is uniform.. problem is not everything is the same size.. for example, if i have 2 lines in a text box verses one...
When i copy i want the object to be moved and snapped from the middle left, not bottom left... or the top right not the bottom left.
is there a way to do this? Justify isnt it..
View 9 Replies
View Related
Aug 15, 2011
good way to start a line at one of the 45 degree angles of a circle block?
View 9 Replies
View Related
Jun 8, 2013
I use CS2; Photoshop quits unexpectedly about one minute after launch. Why? Here is the crash report:
Process: Adobe Photoshop CS2 [560]
Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Identifier: com.adobe.Photoshop
Version: 9.0.1 (9.0.1x294) (9.0.1)
Code Type: PPC (Translated)
Parent Process: launchd [108]
[code]....
View 1 Replies
View Related
Aug 31, 2008
My Photoshop CS3 (Windows XP) all of a sudden takes over a minute to open any file. The programs starts fine, then when I select a file to open, the program pauses, then hangs for over a minute and the photoshop window becomes blank before the file finally appears.
View 5 Replies
View Related
Nov 30, 2012
I'm not getting an error or anything, but the blue grid that follows the area being rendered eventually stops moving, and Photoshop becomes frozen at that point. I have to use the Task Manager to shut it down.
Video card: ATI Radeon HD 5800 Series
Operating System: Windows 7 (64-bit)
RAM: 6 GB
I used Catalyst to install all the latest drivers. I did that when I had CS5. I was trying to do 3D stuff with CS5, but that version wasn't able to detect my GPU, so I got CS6. I've been doing 3D stuff for the past couple days without much issue. I mean, the rendering was slow, but never halted.
I thought maybe it was the size of my document, so I reduced the size, and the rendering process got a little further, but still eventually crashed.
View 29 Replies
View Related
Jan 4, 2004
I created some paths in illustrator, and I want to paste them in photoshop. I tried cut n' paste, but it doesn't work. I tried exporting to PSD, still doesn't work.
View 3 Replies
View Related
Nov 13, 2013
Is there a way to see how many Paths are in a given file?
View 2 Replies
View Related
