AutoCAD 2013 :: Grip Of Hatch Is Not Snapped To Another
Apr 14, 2013
A grip of a hatch is not snapped to another, In the attached screenshots, I tried to move the indicated grip to a target one but no “sign” for snaps is shown!
The screenshot and the dwg are attached. How these two grips can be snapped?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
ADVERTISEMENT
Apr 24, 2013
Trying to remove multiple hatch grips. Since 2011 brought in the pop-up option, single grips can be removed with this method. But when I want to delete a larger number of grips at once, I can't achieve the required result. Process is as follows:
1. Select Hatch itself
2. Holding SHIFT, select multiple grips (which turn from blue to red)
3. Then 1 left click on a grip, and scrolling through the options using CTRL key until I arrive at 'REMOVE'. Then another left click and nothing happens!
View 1 Replies
View Related
Jan 2, 2013
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies
View Related
Dec 20, 2013
I am trying to create a wall tag to do the following also see attached PDF:
Tag designation (text and number) generated from wall style (wallstyles:type) and be annotative.
Tag has 2 lines forming an L that I would like to preset (12" by the text and 18" long) but have the capability to be stretched/stretchable later on.
Tag has grip hand similar to doors which enables it to be attached to walls but doesn't change placement when wall is extended/trimmed/ moved or wall tag generates information from the wall it touches but if the wall moves the tag would stay but show and error or "X".
It didn't sound so difficult in my head but writing it down makes it seem very difficult. Anyways is this possible or any source to some step by step directions for creating a tag like this?
View 1 Replies
View Related
May 24, 2012
In previous versions, grip editing a point from one place to another maintained the point elevation regardless of how the point was moved. For instance, drag it from it's current location and snap to the end of a line. In 2013 the point elevation now changes to match the elevation of the point snapped to.
Is there a new setting to control how points react to Osnaps? Or are we now expected to use the .XY filter (without ever being notified of this change in workflow)?
View 9 Replies
View Related
Oct 18, 2012
Before I will explore Grip Overrule world I have one question. Is it possible to add new grip points into Entity?
View 6 Replies
View Related
Jan 15, 2013
In previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies
View Related
Sep 27, 2012
When I select more than 100 entities all of the grip points disappear. With ACAD 2002 there seemed to be no limit to the number of entities you could select without losing the grips, but with ACAD 2007 they started dissapearing though with '07 clicking "View" "Regen" would bring them back into view (unless you accidentally click on another entity). With ACAD 2013 if I go over 100 that's it. This is mostly a problem for me as I use the spacebar shortcuts extensively in creating and manipulating my drawings. I have found other ways to to acomplish my needs such as using the move command but I have much successful history using my old methods and would like to continue with them.
View 3 Replies
View Related
May 3, 2013
my dynmode is set to 0 so this obviously isnt the variable to turn this off. how to turn this off (see attached pic)
View 8 Replies
View Related
Nov 13, 2013
Not sure as to why this is happening, but like the title says anytime I use move or grab a grip point my osmode automatically changes itself to settings that I do not want. I can change my osnap settings while in the command to set them back to what I had originally had but this is very tedious and I have not experienced this with previous versions of acad.
From all my searching, the only thing I can come up with is; it is a setting within the acad1014doc.lsp but I am not sure.
View 3 Replies
View Related
Nov 7, 2012
What is the system variable to change the display of grip dimensions from decimal to architectural? Specifically I am referring to the dimension associated with a grip(s) when hovering over it.
View 1 Replies
View Related
Jul 29, 2013
If you create a group, after that select it and click on the insertion point (grip) using a lot of time the space bar (to switch between move, rotate, scale and mirror) after a while autocad crash.
Tested in AutoCAD 2013 and 2014 in more the one installation.
View 1 Replies
View Related
Jul 1, 2013
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
View 5 Replies
View Related
Jun 5, 2012
Lets say there is a line across my screen and I want to draw another line snapped to it and 90 degrees to it. How? Without measuring the angle of the first line, which is not at zero or 90 degrees. In 12 years I've never known this
View 7 Replies
View Related
Nov 25, 2012
I'm using Inventor 2013 and would like to create a dialog box requesting the parameters for a simple rectangle and be able to snap in an assembly to get the distance for each parameter (width and depth) of the shape. Is this possible with either VBA or iLogic? I just need how to get the value...I can handle the dialog box.
View 5 Replies
View Related
Dec 5, 2012
ACAD LT 2009, Win XP Lately a feature I am used to seeing has quit.Basically when you hover over a point of a line, a little cross mark appears and you can drag out a dashed line from that point which can be snapped to another object. Handy for finding perpendicular intersections. Whatever this is it no longer works. How do I get it back?
View 2 Replies
View Related
Dec 14, 2011
I would of thought that changing the justify location to an object would change its position when copy and paste...
i copy and paste ALLOT, when i do i utilize reference points so everything is uniform.. problem is not everything is the same size.. for example, if i have 2 lines in a text box verses one...
When i copy i want the object to be moved and snapped from the middle left, not bottom left... or the top right not the bottom left.
is there a way to do this? Justify isnt it..
View 9 Replies
View Related
Aug 15, 2011
good way to start a line at one of the 45 degree angles of a circle block?
View 9 Replies
View Related
Aug 4, 2013
I am using AutoCAD 2014 trial version. There are no hatch patterns included that I know of. Is there any way to experiment with genuine hatch patterns, cross, brick, stone, etc.
View 9 Replies
View Related
Apr 17, 2013
I need to be able to snap som lines etc to some hatches. I have set Options - Drafting and unchecked "Ignore hatch objects" and OSNAPHACTH: 1 and it still doesnt snap.
View 9 Replies
View Related
Jan 7, 2014
Any wave hatch pattern of know where I can download one. I have already been to [URL]........ but the files are only gifs.
View 3 Replies
View Related
Jun 20, 2012
I'm trying to make a custom hatch using circles perforated metal, what that is but how to make a custom hatch with circles random circle holes on a sheet of metal. when i print out my CAD drawing the dimensions are gray and not very visible while the drawing is nice a dark and very visible.
View 1 Replies
View Related
Apr 4, 2013
Selecting the hatch by clicking it, It happens very often that we fail to select the hatch by clicking it.
How to ensure selecting that hatch by clicking it? Why the hatch is failed to be selected by clicking it?
View 9 Replies
View Related
Sep 10, 2013
Here's a new one for me. All the hatch in a drawing file 'vanished'. Can't pick it, can't see it - layer is on and thawed.
I used FILTER to select all the hatches on the layer, and wblocked them out. File is attached, just rename from the .zip extension to .dwg
I still can't see them, or pck them. Auditing will remove the associativity, but that's about it. Still nothing to see.
View 5 Replies
View Related
Dec 22, 2013
Our engineering department users are facing this problem that the hatch patterns are not visible. Everytime they have to use the FILL command when they open any drawing. They are facing this problem with some dwgs, when anybody else opens the same drawing this happens again. After that they are unable to see the hatch patterns in any drawing. After using FILL it becomes visible but restrting the AutoCAD reverts the setting back so they unable to see the hatch pattern again. After opening that dwg in all files they are unable to hatch.
View 3 Replies
View Related
Apr 19, 2012
I'm getting a fatal error everytime I click on the hatch command on the home ribbon and then just press ESC before I do anything. This happens on command.. everytime. AutoCAD LT 2013 to see if they also get the same error.
View 7 Replies
View Related
Dec 14, 2012
I want to know how to make my own hatch from design till puting it in (*.pat) file. for info, I know how can I download such file and upload it in AutoCAd among (CUSTOM) or (OTHER PREDEFINED) hatchs as wel, or make it by using (SUPER HATCH in express tools). But to creat PAT file that what I want to know.
View 2 Replies
View Related
Feb 28, 2013
Every time I try to hatch a larger area, my AutoCAD 2013 program freezes and I need to close the program and restart it, losing anything I hadn't saved prior to the freeze. In addition, certain areas won't hatch because the program is telling me I have open boundaries which is not the case.
View 3 Replies
View Related
Aug 8, 2012
Is it possible to hatch on a curved surface?
View 4 Replies
View Related
Jun 26, 2013
I have just made an Hatch ANSI32 on my drawing. This has a set of 2 lines each, but I would like to have 4 lines set.
View 6 Replies
View Related
Dec 4, 2012
In AutoCAD 2010 I could just click between the grips and it would automatically add the vertex. Now in 2013 I have to hover over the spot between the grips. Is there a way to change that so the default on the center grip is set to add a vertex instead of stretch?
View 5 Replies
View Related