AutoCAD 2013 :: Variable To Turn Off Dynamic Grip Info
May 3, 2013my dynmode is set to 0 so this obviously isnt the variable to turn this off. how to turn this off (see attached pic)
View 8 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Variable To Change Dynamic Grip Parameter Size And Color
Oct 11, 2012What is the variable to change the dynamic grip parameter size and color.
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Moving Properties Table Grip In Dynamic Block
Jun 13, 2013I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
AutoCAD Dynamic Blocks :: Stretch Dynamic Block Grip Points
Feb 4, 2011I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
AutoCAD Dynamic Blocks :: Grip Point Dynamic Block
Nov 15, 2012I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Dynamic Stretch Grip Gets Offset
Apr 4, 2012Is there a way to have the grip stay in the correct position when the distance multiplier is .5? It seems to "get ahead" of the original location.
In the attached block, when I stretch the block with the grip, the grip ends up off the end point. Both actions have a .5 multiplier, with the left side having a rotation of 180 - so both sides stretch equally in opposite directions.
Also, there are 3 views with parameters (width/depth). Is there a way to get the user to enter in the sizes without having to select the size on each view? Basically a table that has a 'user input' field so the size selected changes everything at one time.
AutoCAD 2013 :: Insert Command Turn Off Dynamic Input
Feb 13, 2013Why AutoCAD 2013 turn off dynamic input when we use the insert command. It happens only when using dynamic blocks.
View 5 Replies View RelatedAutoCad :: Dynamic Block Grip
Mar 7, 2012I'm wondering if there is a way to do two things with a block.In the attached drawing, I have a block, Block01. There are 2 visibility states: stretch with 90 degree ends, and stretch with angled ends.
I'd like for the grips for the other parameters to move with the block when I stretch one grip. For example: If I stretch the object with the 90 degree end, I'd like the grips for the angled ends stay in the same position relative to the corners of the object.
I'd also like to have a parameter that reads the angle when stretching with the "stretch with angled ends parameter.
AutoCAD LT :: Removing Alignment Grip On Dynamic Blocks
Nov 14, 2012Any way to remove the alignment grip (the blue triangle / square thing) when you're creating a dynamic block?
I know you can remove the stretch grips and such, but I don't need an "alignment grip" and it's just another symbol that will confuse my users / clutter the block up.
AutoCAD LT :: Block Grip Dynamic Input Changed
Nov 14, 2013I changed something about how AutoCAD displays and enters data for block grips.
It used to display the current value for the parameter when I dragged a grip. For instance grabbing a grip for a linear parameter would give me the current length of the parameter and if I typed 24" into the dynamic input it would change the parameter's value to 24"
Now the grips behave as if they were ordinary entities. For example if I grabbed a linear grip that had a value of 12" the displayed value is 0. As soon as I move it displays the value of the difference. Stretching it to 16" will display 4" when it used to display 16". If I were to type in 16" however the parameter shoots to 28" (12" + 16")!See, it's giving me the polar distance I dragged the grip and not 2'-2" (the value of the linear parameter) like it should.
AutoCAD 2010
AutoCAD LT 2013
AutoCAD Dynamic Blocks :: Block Properties Grip NOT Flipping
Jun 27, 2011A simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Properties Table Grip Location
Jul 1, 2012Have dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).
Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.
Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?
Have attached what I have so far.
Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.
AutoCAD Dynamic Blocks :: Controlling Scale With Click-grip
Apr 15, 2011Exploring a new field in LT here, was wondering if it's possible to use a flip-grip kind of parameter to control the scale of an object, kind of like an on/off switch.
In this case I have a straight line that is about 15mm. What I want is to be able to click a grip and it disappears ( scales down ) and when I click it again it reappears ( scales up ).
I know that this is possible through a lookup parameter or just a similar effect with a stretch grip, But I want to be able to just click a grip like the one for Flip and it re/appears.
AutoCAD Dynamic Blocks :: Grip Flips To Wrong Location
Dec 7, 2012I'm having all kinds of trouble with these dynamic blocks.
This one should be simple, but I can't even get it to work! Please take a look at the drawing... when you flip it, it flips everything (as it should), but the stretch grip goes "up", instead of staying in the middle of the box in the flipped state.
AutoCAD 2010 :: Stretch Dynamic Block Grip Points
Jan 24, 2013I have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Making Dynamic Block Grip
Nov 4, 2013Basically I want a dynamic block that works like an MLeader. I have built the block and can manipulate parameters, but haven't found a way to select a specific dynamic block grip.
It has a base point but then after placing the block I want to activate the stretch grip.
AutoCAD Dynamic Blocks :: Alignment Grip Not Working In Viewport 2011LT
Dec 5, 2011I've made a dynamic block that consists of two lots of attributed text and has the alignment function in it but the alignment part doesn't work when looking through a viewport into modelspace ie i can move it by grapping the alignment grip point - it won't move at all. If i'm in the model tab the block works fine exactly how i made it. I'm the only person in my offie with 2011lt so i don't know if it is my computer or if it is a setting in 2011lt. It works fine in 2011 full and a few other versions around here aswell.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Keep Block Properties Grip Centered When Lines Are Stretched
Mar 18, 2013I am working on a dynamic block that I figured would be fairly simple. However, it is proving to be a huge annoyance. What I want for it to do is stretch the end of a polyline with a stretch action, while at the same time moving the grip of my block properties table. No matter what I do to it, the block properties grip won't move/stretch.
View 4 Replies View RelatedAutoCad :: How To Turn Off Info Pop Up
Sep 1, 2011How do i turn off this info pop up?
[URL].....
AutoCAD .NET :: Double Click On Stretch Grip Of Dynamic Block Generate Fatal Error
Aug 7, 2011I have this double click class. which works fine. In order to clear grips after user finishes with double clicking,I added two lines (which shown on code below). But having those two line make code faulty. When ?
if user select a dynamic block with stretch grip on it, then double click on stretch grip trianlge. code geneaarte fatal error. Funny thing is code doesn't catch. it. Is there any other way to clear grips after double click ?
Here is code:
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.DatabaseServicesPublic Class Main_0_Class Implements IExtensionApplication Public Sub Initialize() Implements IExtensionApplication.Initialize dblClickEven_Class.Start() End Sub
[Code] .....
AutoCAD Inventor :: Turn On / Off Date Time Info
Jul 25, 2012Go to I - button in Inventor, then to the recent files list, hover the mouse over any file in the list.
You will see a preview of the file & later In about a 1 second delay (keep the mouse still) the preview expands a date/time info.
Where switch/checkbox is to turn off/on this date/time info?
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCad :: Dynamic Blocks - LOCKING Variable Length?
Jan 4, 2012-you have a dynamic block with a grip that allows for any adjustable length.
-assume i need a the block to be 500mm long
-i stretch the block 500mm long in CAD (but it is still dynamic and will let me grip the length and adjust).
-after I insert it and set the 500mm length, can I somehow LOCK THE 500 LENGTH, so you cannot grip and edit the length anymore???? (but also have an unlock function for later)
This would be very useful in the following situation: Doing elevation view of a building with wall connections between floors....There would be MANY of these dynamic blocks....But they should all be the same length, per floor...But the next floor may have a different length....So I want to be able to Set Length > then lock in place... (and be able to unlock whichever I want, and adjust appropriately where the connection gets longer/shorter at another location...)
AutoCAD Dynamic Blocks :: Limit A Stretch Or Move But With A Variable Value?
Dec 17, 2011I would like to find a way to give a maximum and minimum length to a stretch (or move) but without absolute values.
simplified example of my block:
I have 2 squares, of which one big on, and a smaller one within the bigger one. I want to be able to stretch both squared indefinatly (no problem there), but the big square may never become smaller than the small one, and the small one may never become bigger than the big one...
In other words: the inside square should always stay inside the bigger one, no matter the size of the squares.
The problem with this block is that I have a hatch pattern between the squares, and as soon as i stretch the small square outside (or equal) to the big square... the hatch pattern 'crashes'.
AutoCAD 2013 :: Grip Of Hatch Is Not Snapped To Another
Apr 14, 2013A grip of a hatch is not snapped to another, In the attached screenshots, I tried to move the indicated grip to a target one but no “sign” for snaps is shown!
The screenshot and the dwg are attached. How these two grips can be snapped?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2013 :: Creating Wall Tag With Grip
Dec 20, 2013I am trying to create a wall tag to do the following also see attached PDF:
Tag designation (text and number) generated from wall style (wallstyles:type) and be annotative.
Tag has 2 lines forming an L that I would like to preset (12" by the text and 18" long) but have the capability to be stretched/stretchable later on.
Tag has grip hand similar to doors which enables it to be attached to walls but doesn't change placement when wall is extended/trimmed/ moved or wall tag generates information from the wall it touches but if the wall moves the tag would stay but show and error or "X".
It didn't sound so difficult in my head but writing it down makes it seem very difficult. Anyways is this possible or any source to some step by step directions for creating a tag like this?
AutoCAD Civil 3D :: 2013 Points And Grip Editing
May 24, 2012In previous versions, grip editing a point from one place to another maintained the point elevation regardless of how the point was moved. For instance, drag it from it's current location and snap to the end of a line. In 2013 the point elevation now changes to match the elevation of the point snapped to.
Is there a new setting to control how points react to Osnaps? Or are we now expected to use the .XY filter (without ever being notified of this change in workflow)?
AutoCAD .NET :: Add New Grip Point With Grip Overrule
Oct 18, 2012Before I will explore Grip Overrule world I have one question. Is it possible to add new grip points into Entity?
View 6 Replies View RelatedAutoCAD Dynamic Blocks :: Displaying Attribute Info In Multi-leader?
Sep 16, 2013is there an way to display attribute data using a multi-leader inside a single dynamic block.
To elaborate, I'm trying to create a borehole dynamic block that I can enter the ground level and end of borehole level as attributes, and have them show up in a multi-leader. The reason for the multi-leader is that I can add a background mask to it and it automatically adjusts the length of the outline obox around it.
I just want to insert the borehole block from a tool palette, enter a couple of attributes, stretch the bottom down to whatever level, and I'm done.
I've been playing with it all weekend trying to get fields to show the attributes and I can get it to work if I use another block for the levels (multi-leaders), but even then I have to into the fields an mess with them. It's go to be east so my CAD guys can do it without slowing down, otherwise they may as well carry writing everything out long-hand as they do now.
I'm using Civil 3D 2012, if that matters.
AutoCAD Civil 3D :: 2013 Point Marker Rotate Grip?
Jan 15, 2013In previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedAutoCAD 2013 :: When Select More Than 100 Entities All Of Grip Points Disappear?
Sep 27, 2012When I select more than 100 entities all of the grip points disappear. With ACAD 2002 there seemed to be no limit to the number of entities you could select without losing the grips, but with ACAD 2007 they started dissapearing though with '07 clicking "View" "Regen" would bring them back into view (unless you accidentally click on another entity). With ACAD 2013 if I go over 100 that's it. This is mostly a problem for me as I use the spacebar shortcuts extensively in creating and manipulating my drawings. I have found other ways to to acomplish my needs such as using the move command but I have much successful history using my old methods and would like to continue with them.
View 3 Replies View RelatedPhotoshop :: How To Disable Or Turn Off The Measurement / Info Fly Out Box
Jun 17, 2013In CS6 how do you disable or turn off the "measurement/info" fly out box, for example I am using the line tool to clean up a graphic, however at the point of my curser, the info panel is in the way and I cant see what I am tyring to erase.
View 1 Replies View Related