AutoCAD Dynamic Blocks :: Alignment Grip Not Working In Viewport 2011LT

Dec 5, 2011

I've made a dynamic block that consists of two lots of attributed text and has the alignment function in it but the alignment part doesn't work when looking through a viewport into modelspace ie i can move it by grapping the alignment grip point - it won't move at all.  If i'm in the model tab the block works fine exactly how i made it.  I'm the only person in my offie with 2011lt so i don't know if it is my computer or if it is a setting in 2011lt.  It works fine in 2011 full and a few other versions around here aswell.

View 1 Replies


ADVERTISEMENT

AutoCAD LT :: Removing Alignment Grip On Dynamic Blocks

Nov 14, 2012

Any way to remove the alignment grip (the blue triangle / square thing) when you're creating a dynamic block?

I know you can remove the stretch grips and such, but I don't need an "alignment grip" and it's just another symbol that will confuse my users / clutter the block up.

View 5 Replies View Related

AutoCAD Dynamic Blocks :: Moving Properties Table Grip In Dynamic Block

Jun 13, 2013

I have a dynamic block, that represents a stirrup.

I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.

The problem is that I can't make this grip moveable )

See the attachement with the block

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Stretch Dynamic Block Grip Points

Feb 4, 2011

I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.

I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.

But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Variable To Change Dynamic Grip Parameter Size And Color

Oct 11, 2012

What is the variable to change the dynamic grip parameter size and color.

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Grip Point Dynamic Block

Nov 15, 2012

I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Dynamic Stretch Grip Gets Offset

Apr 4, 2012

Is there a way to have the grip stay in the correct position when the distance multiplier is .5? It seems to "get ahead" of the original location.

In the attached block, when I stretch the block with the grip, the grip ends up off the end point.  Both actions have a .5 multiplier, with the left side having a rotation of 180 - so both sides stretch equally in opposite directions.

Also, there are 3 views with parameters (width/depth). Is there a way to get the user to enter in the sizes without having to select the size on each view? Basically a table that has a 'user input' field so the size selected changes everything at one time.

View 7 Replies View Related

AutoCAD Dynamic Blocks :: Block Properties Grip NOT Flipping

Jun 27, 2011

A simple dynamic block using a Block Properties Table to control the value of an attribute.  The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Properties Table Grip Location

Jul 1, 2012

Have dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).

Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.

Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?

Have attached what I have so far.

Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Controlling Scale With Click-grip

Apr 15, 2011

Exploring a new field in LT here, was wondering if it's possible to use a flip-grip kind of parameter to control the scale of an object, kind of like an on/off switch.

In this case I have a straight line that is about 15mm. What I want is to be able to click a grip and it disappears ( scales down ) and when I click it again it reappears ( scales up ).

I know that this is possible through a lookup parameter or just a similar effect with a stretch grip, But I want to be able to just click a grip like the one for Flip and it re/appears.

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Grip Flips To Wrong Location

Dec 7, 2012

I'm having all kinds of trouble with these dynamic blocks.

This one should be simple, but I can't even get it to work! Please take a look at the drawing... when you flip it, it flips everything (as it should), but the stretch grip goes "up", instead of staying in the middle of the box in the flipped state.

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Keep Block Properties Grip Centered When Lines Are Stretched

Mar 18, 2013

I am working on a dynamic block that I figured would be fairly simple. However, it is proving to be a huge annoyance. What I want for it to do is stretch the end of a polyline with a stretch action, while at the same time moving the grip of my block properties table. No matter what I do to it, the block properties grip won't move/stretch.

View 4 Replies View Related

AutoCAD Dynamic Blocks :: Set Dynamic Visibility To Viewport?

Sep 7, 2011

Is it possible to have 1 instance of a dynamic block  (with multiple visibility states and/or look up properties)  in your drawing and view a different visibility state or look up in different viewports?

View 1 Replies View Related

AutoCAD Civil 3D :: Adding Dynamic Blocks To Alignment Label

May 14, 2013

I am using AutoCAD Civil 3D 2013. I am thinking that this may not be possible at this point but I am still going to try.  I have an alignment label style for station and offset.  I also have created a dynamic block for the border of this label to put around that label.  This call out border is not a typical single width border so the borders within the alignment style do not match and cannot be used for our designs. I have attached an image of the border around the label style for a random alignment.  So far the dynamic block has been a great fix for the border so that we dont spend a lot of time drawing in these borders for each label, but I was trying to add this dynamic block to the label style so that it would act as the border.  

So far I have tried adding the block as a component in the layout tab of the label style but it appears where I anchor it and does not access any of the dynamic attributes to make the callout box larger in reference to the text.  I know I can insert it so that in general it will be surrounding the Station, Offset, and Alignment contents, however, we frequently add additional text to our labels to callout pipe bends and other items so the box is not typically the same size. 

How I might be able to do this or if it is not possible at this time?

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Alignment Flip - Backwards Attribute Text

Feb 6, 2009

I have been trying to convert my offices blocks to dynamic blocks and this one is giving me a hassle.

Essentially we have a line with an arrow at the end of it to show drainage pathways. I added a multiline attribute so we can add the percentage along the line with a mask. The line, arrow and attribute all need to be able to be aligned perpendicular or tangent to a given line. Everything looks great until the arrow flips sides to work from the other direction and then the text is mirrored backwards.

Mirrtext is set to 0 and I even tried it while in the Beditor to see if there was independent. Multiline or Regular attribute have the same effect as well as if they are locked position or not.

I tried adding a flip, but then the mirrortext settings work just fine and the text won't flip back.

View 5 Replies View Related

AutoCAD Dynamic Blocks :: How To Create Block Of Displayed Objects Within A Viewport

Sep 11, 2013

I believe there is a way to create a block of displayed objects that are shown within viewport.  I know I have done this before with basic Autocad.  The closest thing at the moment that I can think of is "SOLPROF" but that only works for 3D objects.

The way I remember the command working was you started off with the command, select the objects with the viewport/or maybe it was just the viewport, the command made an instantaneous block of the objects that were only within the display area.

View 1 Replies View Related

AutoCAD 2013 :: Dynamic Blocks Not Working On One Computer

Feb 27, 2013

Dynamic blocks not working on one new office computer with AutoCAD 2013 -  The problem seems mainly with the stretch feature.  some features like flip and visibility states seem to work.  The blocks are good, they work on other machines and on saved files from that computer.

We have tried doing a repair with the disk and updating with service pack 1.1.

Other computer have AutoCAD MEP 2013, but these are not MEP features.

I read an older post (2007) regarding the blocks not working due to the shortcut menus in drawing area no checked in the options, but that does not seem to be the issue.

View 4 Replies View Related

AutoCAD Dynamic Blocks :: DB Stretch Action Isn't Working Correctly

Oct 4, 2013

I cleaned up my block and I am trying to use a field to reference a polyline for it's overall distance. The distance changes with my lookup action. After rotating and going back and forth from "On" - "Off" - "Both Off", then back to "On", the red polyline doesn't stretch back on it's original plane.

View 5 Replies View Related

AutoCAD Dynamic Blocks :: Attributes Not Working In Visibility States

Oct 28, 2013

I'm new to dynamic blocks.  In my first attempt to create a simple dynamic block with various visibility states in which each would have it's own attribute, the only attribute that works is the attribute in the first visibility state listed.  I have read all the postings I could find here in the group on this subject and have made the following changes suggested here to the block:

1. All attributes have distinct tags and prompts. (I even erased all the originial attributes and created new with original tags.)

2. All attributes are locked in position. 

3. I REGEN after selecting a different visibility state.

None of these changes has had any effect.  Still, then only attribute that opens an attribute edit dialogue box is the "W" attribute in the first visibility state listed.

View 6 Replies View Related

AutoCAD Civil 3D :: Grip Edit Horizontal Alignment?

Apr 25, 2012

i thought we can grip edit a horizontal alignment? - when does it not work or not applicable because when I tried to change part of my alignment it did not work?

View 3 Replies View Related

AutoCAD Dynamic Blocks :: Annotative Parameters Inside Dynamic Blocks

May 5, 2010

I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.

In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.

The attached file shows a simple example.

View 2 Replies View Related

AutoCAD Civil 3D :: Grip Edit Alignment Changes Reference Point Location

Aug 26, 2013

I know this.  I am aware.  This is why I avoid changing the reference point as much as possible if I have profile views or anything else dependent on my alignment.  I also have no problem with this dialog giving me a useful reminder.

My problem is this: if I want to make my alignment longer, and I grab the grip at the end of it and drag it to a new location, the reference point moves too!  Who in their right mind would want the reference point to move when adjusting the end? Personally  I wouldn't want C3D to ever move my reference point automatically.  I can have some sympathy with moving it if I am grip-editing the start of the alignment, or the tangent on which the reference point resides.  But I'm editing at the end of the alignment, on a different tangent.  Why would you move my reference point and make me have to go back and reset it to where it was?  How dare you throw your warning message at me for moving the reference point back to where it should be when you secretly moved it to a wrong location with no warning whatsoever?

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Adding One Action To Dynamic Blocks

Mar 15, 2012

I have created a dynamic block with several visiblility states. The block works great for what I need it for. however, I am trying to add one more action to the block but am having issues.

This block is essentially a 24" retail cabinet with the visibility states showing the different drawer and shelf configurations. I want to be able to lengthen the cabinet in 24" increments and have the visibility show for each 24" section.....e.g.  I want a 10' cabinet so I bring in the 24" starter block. Then stretch the cabinet to the 10' mark, then I can chose any drawer/shelve config for each 24" section (they are all different).

I can get the block to stretch in 24" sections....no problem.....i just want the visibility state to be duplicated as well for each section. Now as it stretches, there is only one Vis state and it only populates the first cabinet.

I could do this by copying the block over and over 5 times.....but I am hoping there is a way to make this dynamic.

View 7 Replies View Related

AutoCAD Dynamic Blocks :: Insertion Point On Dynamic Blocks

Apr 23, 2013

I have a block I am making into a Dynamic Block. I will be adding in different visibility states. Depending on the visibility state the block would need to be inserted from a different point.

My question is, is it possible to add multiple insertion points to a dynamic block so depending on the visibility state it defaults to the correct insertion point?

View 2 Replies View Related

AutoCad :: Dynamic Block Grip

Mar 7, 2012

I'm wondering if there is a way to do two things with a block.In the attached drawing, I have a block, Block01. There are 2 visibility states: stretch with 90 degree ends, and stretch with angled ends.

I'd like for the grips for the other parameters to move with the block when I stretch one grip. For example: If I stretch the object with the 90 degree end, I'd like the grips for the angled ends stay in the same position relative to the corners of the object.

I'd also like to have a parameter that reads the angle when stretching with the "stretch with angled ends parameter.

View 9 Replies View Related

AutoCAD LT :: Block Grip Dynamic Input Changed

Nov 14, 2013

I changed something about how AutoCAD displays and enters data for block grips.

It used to display the current value for the parameter when I dragged a grip.  For instance grabbing a grip for a linear parameter would give me the current length of the parameter and if I typed 24" into the dynamic input it would change the parameter's value to 24"

Now the grips behave as if they were ordinary entities.  For example if I grabbed a linear grip that had a value of 12" the displayed value is 0.  As soon as I move it displays the value of the difference.  Stretching it to 16" will display 4" when it used to display 16".  If I were to type in 16" however the parameter shoots to 28" (12" + 16")!See, it's giving me the polar distance I dragged the grip and not 2'-2" (the value of the linear parameter) like it should.  
 
AutoCAD 2010
AutoCAD LT 2013

View 4 Replies View Related

AutoCAD 2013 :: Variable To Turn Off Dynamic Grip Info

May 3, 2013

my dynmode is set to 0 so this obviously isnt the variable to turn this off. how to turn this off (see attached pic)

View 8 Replies View Related

AutoCAD 2010 :: Stretch Dynamic Block Grip Points

Jan 24, 2013

I have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Stretching Dynamic Blocks

Sep 7, 2012

is there a way to make dynamic blocks stretchable similar to a mleader,

the blocks i create are only stretchable by grips, and not by crossing

(i am using linear or point parameter stretches)

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Grips And Dynamic Blocks

Jun 1, 2006

Is there anyway to link standard AutoCAD Grips and there commands to Dynamic Block Actions? I want to stretch an arc by its midpoint grip. This accomplishes something that no other commands do.

View 4 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Making Dynamic Block Grip

Nov 4, 2013

Basically I want a dynamic block that works like an MLeader. I have built the block and can manipulate parameters, but haven't found a way to select a specific dynamic block grip.

It has a base point but then after placing the block I want to activate the stretch grip.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved