I am working on a dynamic block that I figured would be fairly simple. However, it is proving to be a huge annoyance. What I want for it to do is stretch the end of a polyline with a stretch action, while at the same time moving the grip of my block properties table. No matter what I do to it, the block properties grip won't move/stretch.
View 4 RepliesI have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
A simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies View RelatedI am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered
I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.
I have an X centered as my insertion point.
When I stretch the dynamic block for a larger area the X stretches but into the next single box but not centered within the double space.
how to get the X to be centered in the box when it is enlarged to a double or triple size?
Have dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).
Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.
Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?
Have attached what I have so far.
Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).
View 9 Replies View RelatedIn "test" mode, this block works well except for the point of the arrow. If you stretch the line under the title, then move the arrow point to somewhere else, then flip it, the arrow point and its associated grip needs to stay put.
It actually does, the first time. BUT then if you move the arrow point again and flip it again, it does not.
Then, when I inserted it into another drawing, either with "insert" or via SSM, the flip doesn't stick to the point even the first time.
So I guess my question is how to flip it but keep the point where it happens to be when the flip occurs. Like a multileader, because what I am actually trying to create here is a multileader that has an annotative block with attribute fields, to be used with SSM.
is it possible to define more than one block properties table in a DB?
I have a block definition with several attributes. I would like to pick a (predefined) value for each of the attribute. Making just one block properties table means that I need to fill all the possible combinations of these attributes.
Is there a way to rearrange custom block properties in a DB?
View 9 Replies View RelatedThe "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedI am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies View RelatedWhat is the variable to change the dynamic grip parameter size and color.
View 3 Replies View RelatedThere are two position points. The lower one one moves the rotation paramenter and doesn't cause any problems.
The higher postion point stretches the rotation parameter. Wierd thing is that it changes the angle value when it does it.
i was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
Is there a way to have the grip stay in the correct position when the distance multiplier is .5? It seems to "get ahead" of the original location.
In the attached block, when I stretch the block with the grip, the grip ends up off the end point. Both actions have a .5 multiplier, with the left side having a rotation of 180 - so both sides stretch equally in opposite directions.
Also, there are 3 views with parameters (width/depth). Is there a way to get the user to enter in the sizes without having to select the size on each view? Basically a table that has a 'user input' field so the size selected changes everything at one time.
I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedI am having trouble trying to add text to a dynamic block that will stay locked and centered when I stretch it left/right and up/down. The default text I am looking to have should be 36x24 (36 is the lenght of the unit, 24 is the depth). I can also upload my block.
View 7 Replies View RelatedAny way to remove the alignment grip (the blue triangle / square thing) when you're creating a dynamic block?
I know you can remove the stretch grips and such, but I don't need an "alignment grip" and it's just another symbol that will confuse my users / clutter the block up.
I'm wondering if there is a way to do two things with a block.In the attached drawing, I have a block, Block01. There are 2 visibility states: stretch with 90 degree ends, and stretch with angled ends.
I'd like for the grips for the other parameters to move with the block when I stretch one grip. For example: If I stretch the object with the 90 degree end, I'd like the grips for the angled ends stay in the same position relative to the corners of the object.
I'd also like to have a parameter that reads the angle when stretching with the "stretch with angled ends parameter.
Exploring a new field in LT here, was wondering if it's possible to use a flip-grip kind of parameter to control the scale of an object, kind of like an on/off switch.
In this case I have a straight line that is about 15mm. What I want is to be able to click a grip and it disappears ( scales down ) and when I click it again it reappears ( scales up ).
I know that this is possible through a lookup parameter or just a similar effect with a stretch grip, But I want to be able to just click a grip like the one for Flip and it re/appears.
I'm having all kinds of trouble with these dynamic blocks.
This one should be simple, but I can't even get it to work! Please take a look at the drawing... when you flip it, it flips everything (as it should), but the stretch grip goes "up", instead of staying in the middle of the box in the flipped state.
I've made a dynamic block that consists of two lots of attributed text and has the alignment function in it but the alignment part doesn't work when looking through a viewport into modelspace ie i can move it by grapping the alignment grip point - it won't move at all. If i'm in the model tab the block works fine exactly how i made it. I'm the only person in my offie with 2011lt so i don't know if it is my computer or if it is a setting in 2011lt. It works fine in 2011 full and a few other versions around here aswell.
View 1 Replies View RelatedI changed something about how AutoCAD displays and enters data for block grips.
It used to display the current value for the parameter when I dragged a grip. For instance grabbing a grip for a linear parameter would give me the current length of the parameter and if I typed 24" into the dynamic input it would change the parameter's value to 24"
Now the grips behave as if they were ordinary entities. For example if I grabbed a linear grip that had a value of 12" the displayed value is 0. As soon as I move it displays the value of the difference. Stretching it to 16" will display 4" when it used to display 16". If I were to type in 16" however the parameter shoots to 28" (12" + 16")!See, it's giving me the polar distance I dragged the grip and not 2'-2" (the value of the linear parameter) like it should.
AutoCAD 2010
AutoCAD LT 2013
I have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.
View 1 Replies View RelatedBasically I want a dynamic block that works like an MLeader. I have built the block and can manipulate parameters, but haven't found a way to select a specific dynamic block grip.
It has a base point but then after placing the block I want to activate the stretch grip.
I have this double click class. which works fine. In order to clear grips after user finishes with double clicking,I added two lines (which shown on code below). But having those two line make code faulty. When ?
if user select a dynamic block with stretch grip on it, then double click on stretch grip trianlge. code geneaarte fatal error. Funny thing is code doesn't catch. it. Is there any other way to clear grips after double click ?
Here is code:
Imports Autodesk.AutoCAD.RuntimeImports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.DatabaseServicesPublic Class Main_0_Class Implements IExtensionApplication Public Sub Initialize() Implements IExtensionApplication.Initialize dblClickEven_Class.Start() End Sub
[Code] .....
So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedI need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)