i was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
The "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedI am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedDynamic block is for a title block which can be horizontal or vertical and a few different positions.
My lookup table controls the orientation and position of all the items including a number of attributes. But for two attributes I have allowed a grip on the Point Parameters so they can be dragged left/right if there is not enough room when the text is longer.
I can reposition the attributes but if I reposition twice then the Lookup table resets to its "Unmatched" configuration which I don't want. I believe I have to have an "unmatched" setting and "allow reverse lookup" and at the same time I want the user to be able to customize the position of these attributes.
Have dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).
Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.
Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?
Have attached what I have so far.
Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.
It's about "Block Properties Table",I want to use a Block Properties Table to manage a Dynamic Block.
I have defined a Dynamic Block a and its Block Properties Table in Autocad2010,this is the screenshot of the Block Properties Table(a1:d1=100,d2=200;a2:d1=100,d2=400;a3:d1=100,d2=600.) Now I want to insert the Dynamic Block using .NET API.after I input a command,the block of a2(d1=100,d2=400) is inserted. I have the code about it, but the code is not complete. this is the Dynamic Block
this is the the screenshot of the Block Properties Table .
the result:
the code about it:
[CommandMethod("readBlockTable")]
static public void CmdReadBlockTable()
{
Editor ed = Application.DocumentManager.
MdiActiveDocument.Editor;
// select a block reference
[Code].......
I am unsure weather to post this in Dyn Block technical or Fields as it comprises elements of both.
I am trying to get a field to return a 'lookup properties' value...
Actually, what I am trying to do is use a field to display either a + or a - depending upon upon the state of a flip parameter.
How I have been trying to achieve that is by using a lookup table to assign:
Input Properties.....Lookup Properties
Not flipped........=............+
Flipped.............=............-
Then I'm setting a Field to look at the Object 'Lookup Parameter' and return 'Lookup Action'.
The field then displays '#########' when testing the block.
When I return to edit the field it complains 'the object referenced y the field has been erased'. Both the table and parameter are still there, so I don't know what the problem is. Is there a better way of having a field return a specific value based upon a parameter state?
What I'm interested in is finding a method of connecting several properties from several Autocad drawings to a single table. I would create several custom properties in each drawing and use some of them to fill the boxes in the drawing itself (already implemented) and some of them to fill the table which could later be printed or used in some other manner (maybe even combined with an ERP software interface). Some of the properties would be used both in the drawing and in the table. What I would really like to achieve is to be able to change the property values in the drawings by changing the values in the table and vice versa.
I know how to do it for one of the drawings but I don't know if it's possible to connect several? It doesn't have to be custom properties, it can also be a table in each of the drawing if it's easier to connect with a central table that way. I suppose the best way to gather all the drawings in one place would be to use Sheet Set Manager. A bit of a problem with the sheet set manager is that we have 5 layers set up for each of the drawings and I would like to import only one of them into the sheet set. The thing is picking them by hand would take time and that's the thing I wanted to avoid in the first place. Is there maybe an option to use only import the last active layer into the sheet set?
is it possible to define more than one block properties table in a DB?
I have a block definition with several attributes. I would like to pick a (predefined) value for each of the attribute. Making just one block properties table means that I need to fill all the possible combinations of these attributes.
how (if) I can set up my dynamic blocks so that I can set the parameter values as I insert the block, rather than with the grips afterwards?
To take a simple example; I have a block consisting of a rectangle, with 2 linear stretch parameters - length, width. Can I set it up so that when I insert the block, it asks for the length and breadth,just as it would for attributes.
A simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies View RelatedIs there a way to rearrange custom block properties in a DB?
View 9 Replies View RelatedI am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies View RelatedI was working on a dynamic block and visibility states, but for uknown reason I don't see the visibility drop down on the block editor toolbar.
Is there a way to turn it on. I am using AutoCad 2010.
See the attached file for a screen shot.
I am having some troubles whit my dynamic blocks.
Whenever I add a block property table the window that should be opent doesn't open. The strange thing is that I think it actualy is open but i just don't see it on my screen. The same thing gous for the screen that allows you to ad a parameter to a lookup set. by folowing this link you can see what i mean, it gets interesting after 30 seconds.
[URL]
I am working on a dynamic block that I figured would be fairly simple. However, it is proving to be a huge annoyance. What I want for it to do is stretch the end of a polyline with a stretch action, while at the same time moving the grip of my block properties table. No matter what I do to it, the block properties grip won't move/stretch.
View 4 Replies View RelatedI built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.
C3D 2013
How can I get the drop down menu of previously input data to come back? I was here on a previous computer so I assume its something in the part catalog or part builder?
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
Just a quick query about Dynamic Blocks. I use dynamic blocks with various visibility states regularly in my drawings. Is it possible to add some kind of custom variable or value to a dynamic block so that I can identify them in automated scheduling?
For example, if I have a dynamic block which represents three variations of very similar machine models is it possible to somehow give each visibility state a value, ie: the model numbers. M100/M125/M150 etc which can then be extrapolated depending which visibility state is active?
Also regarding the limitations of dynamic blocks. Is there a number of visibility states I should not exceed so that the blocks still perform 100%?
My boss gave me a copy of Autocad 2012. I've messed around with architecture 2010 before so the ribbons are no surprise. One thing I have noticed that's really different is the dynamic block constraints & block table actionblock properties table? I looks very similar to the lookup property table
View 0 Replies View RelatedSo I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedI need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
I would like to create a "wave" dynamic block, see below...
It is made from wipeout.
Is it chance to make a similar?
If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?