AutoCAD Dynamic Blocks :: Rearrange Custom Block Properties?
Aug 18, 2009Is there a way to rearrange custom block properties in a DB?
View 9 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Moving Properties Table Grip In Dynamic Block
Jun 13, 2013I have a dynamic block, that represents a stirrup.
I inserted in the block a Block Propreties Table, that have some preset dimensions for the stirrups. The grip of this table I decided to put in the top right corner.
The problem is that I can't make this grip moveable )
See the attachement with the block
AutoCAD Dynamic Blocks :: Various Block Properties Tables In One Block?
Jun 26, 2013is it possible to define more than one block properties table in a DB?
I have a block definition with several attributes. I would like to pick a (predefined) value for each of the attribute. Making just one block properties table means that I need to fill all the possible combinations of these attributes.
AutoCAD Dynamic Blocks :: Link Dynamic Block Custom Rotation Action
Mar 22, 2013So I've done a reasonable amount of work with dynamic blocks. I have a block with a rotation action and grip to arbitrarily align it. However I realized when trying to combine it with an alignment grip (which actions on the basic or fundamental block rotation angle) that there didn't seem to be a way to some how link a dynamic block rotation action or one of the custom angle properties to a the fundamental block rotation angle. Thus there are two additive rotations at work; the dynamic block one with its grip and the fundamental rotation property.
This can cause some confusion when one person aligns with the grip and another via rotating the block's fundamental property and would also be problematic in the generalized sense if one was trying to select or programmatically read back the net angle alignment.
AutoCAD Dynamic Blocks :: Reorder Custom Properties - Not Organized In Optimal Order?
Oct 31, 2005After spending a lot of time creating a particular dynamic block, I realized that the order of custom properties of this block as shown in the Properties Palette is not organized in an optimal order.
For example I have "Cabinet Width" at the top of the custom properties list, and "Cabinet Height" way down near the bottom. This is going to make my Cad operators hunt around too much for the property they need to adjust.
The apparent order is by creation - first created custom property is listed first, last created is shown last. I really don't want to remake this dynamic block just to get the properties in a logical order.
I was wondering if it is possible to reorder the custom properties as shown in the properties palette?
AutoCAD Dynamic Blocks :: Block Properties Grip NOT Flipping
Jun 27, 2011A simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: Block Properties Table Not Corresponding With Parameter?
Nov 8, 2013The "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedAutoCAD Dynamic Blocks :: How To Use The Properties Block For Preset Definitions
Sep 18, 2013I am new to dynamic blocks. I have figured out how to use the Properites block for "preset" definitions but we offer a product in infine sizes (within limits). For example the width may range from 30" to 200" in fractional increments which is impossible to set up presets. Is there a way that a person can set up the properties block so that a person would be prompted to enter required information, I.E. Width = xx", Height = xx" etc.?
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Keep Block Properties Grip Centered When Lines Are Stretched
Mar 18, 2013I am working on a dynamic block that I figured would be fairly simple. However, it is proving to be a huge annoyance. What I want for it to do is stretch the end of a polyline with a stretch action, while at the same time moving the grip of my block properties table. No matter what I do to it, the block properties grip won't move/stretch.
View 4 Replies View RelatedAutoCAD Dynamic Blocks :: Precision Of Values In Drop Down Menu When Using Block Properties Table
Jun 20, 2012i was wondering if it's possible to change the default precision of values in the drop down menu for linear parameters when using a block properties table from 4 digits to 0.
See attached file, when opening the dropdown menu, the centre-to-centre widths of the chair are displayed in a value with 4 digits "behind the comma" and i would like that to be 0.
AutoCad :: Rearrange Attributes - Battman Messes Up Dynamic Blocks
Jan 16, 2014When i use Battman to re-arrange my attributes (in order to be able to auto-number them easily with a numbering-lisp), all values, rotation actions etc. are messed up and the block becomes unusable.
I use 2009, I've also tried it in ACAD 2014, same story.
The next step would be to create the block from scratch.
AutoCAD Dynamic Blocks :: Flipping Dynamic Block With Multiple Items Not Visible
Jul 25, 2012new to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedAutoCAD Dynamic Blocks :: Create A Dynamic Block For Glass Panel In Balustrade
Feb 28, 2012I need to create a dynamic block for a "Glass Panel" in a balustrade. I need to be able to insert it, in one corner and stretch it in another corner, to suit the staircase angle.
I've created the block, but it isn't working correctly. I've attached a drawing, with the left hand drawing a sketch of how it needs to be. The right hand drawing is my dynamic block attempt. As can be seen, when the block is stretched between the 2 points, it doesn't follow the angle of the staircase correctly (Very slight run off)
AutoCAD Dynamic Blocks :: Insertion Point Of Attribute Changing Within Dynamic Block
Nov 21, 2011I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
AutoCAD Dynamic Blocks :: Pass Attribute Values To Dynamic Block Parameters?
Dec 4, 2013I am looking for a way to use the ATTIN/ATTOUT workflow to bring in data from an excel spreadsheet to drive the size of each of my block's instances. The block will be simple, a rectangle, with width and length parameters. For each entity in my excel/csv file these parameter values are spelled out. I know how to display these parameters in my attributes, but I don't know how, if I were to feed in these values, to drive the geometry. If there's a better way to take a list of width and length values to generate a series of blocks each with a rectangle containing its respective size.
View 1 Replies View RelatedAutoCAD Dynamic Blocks :: How To Disable The Dialog Box Shown When Open A Dynamic Block
Nov 7, 2011I need to do some repetitive task on a lot of dynamic blocks, unfortunately, when I open each file, AutoCAD keeps asking if I want to open it with the block editor.
Is there a way to disable that dialog and open the files as normal dwgs?
A hint: BLOCKEDITLOCK doesn't make it, it shows another dialog...
AutoCAD Dynamic Blocks :: Make Dynamic Block Of Column Radiator
Mar 26, 2012I'm trying to make a dynamic block of a column radiator.
It should be very simple. It's a 46mm wide module that comes in a range of heights (300, 500, 600, & 750mm) and a range of assembly widths (9, 13, 18, 22 & 27 modules wide - more commonly given as mm widths of 414, 598, 828, 1012 & 1242 respectively).
My attempt at constructing it has gone quite well, but when 'stretching' the block a ghost of the core 414 (w) x 300 (h) unit remains. I attach the block to give you a better idea of what I mean.
AutoCad :: Insert Dynamic Block From File With Multiple Dynamic Blocks
Jul 16, 2010I have a drawing ("SURUBURI.dwg") with several dynamic blocks ("M12", "M16", "M18" ... an so on...). I want to insert in my current drawing, one of the blocks from SURUBURI.dwg, for instance the block named "M12".
For that i tried creating a new command "INSERT_M12" that has the following script :
^C^C-INSERT; "I:/Ionut Mihaila/Goodies/SURUBURI.dwg/M12"
Now obvious that doesn't work, but i think it shows clearly what i want to accomplish. So is there an other way to do this?
AutoCAD Dynamic Blocks :: Join Two Dynamic Block To One Common Action?
Sep 18, 2013I'm working on a drawing and I want an action to work on two diffrent dynamic blocks.
In my case, I wish to have two blocks that I can rotate by one rotation grip.
How do I manage to work this out?
AutoCAD Dynamic Blocks :: Stretch Dynamic Block Grip Points
Feb 4, 2011I have successfully created a dynamic block. I can insert it into AutoCAD, and it behaves like I want, except for one thing.
I can select the block and change it by taking a grippoint and place it at another position. So my block is e.q. stretched, just like I wanted.
But then. When I want to use the ordinary STRETCH command of AutoCAD, I can only stretch the insertion point of the block, but not the grippoints. Is there a way to set a grippoint to be select edable by commands like STRETCH.
AutoCAD Dynamic Blocks :: How To Create WAVE Dynamic Block
Mar 1, 2013I would like to create a "wave" dynamic block, see below...
It is made from wipeout.
Is it chance to make a similar?
If I make a list for the length (from 125 to 350), after can I make a table /list /summary where these size are shown?
AutoCAD Dynamic Blocks :: Scaling Objects In Dynamic Block
Jun 27, 2013Why the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.
I tried adding position point and link, etc....I run out options and don't know how to fix this.
LT 2012 user
AutoCAD LT 2012
Windows 7 - 64 bit
AutoCAD Dynamic Blocks :: Grip Point Dynamic Block
Nov 15, 2012I have a dynamic block with several actions and parameters. There are three grip points. Two are visible. One appears when you move one of the other grips. If i insert or paste this block near my template, the X/Y basepoint stays near the template when i drag the block on the template with one of the other two grips.. When i print the drawing the basepoint stays visible and the scale on my printed drawing is not correct (smaller).
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: How To Keep An Object Centered On A Dynamic Block
May 29, 2013I am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered
I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.
AutoCAD Dynamic Blocks :: Create Dynamic Block With Dimension
Jan 4, 2014I have a drawing with dimensions. Now, I want create Dynamic Block Controlling Visibility with dimensions in drawing with name dimension.
LT-don-TD LT-Kdoc-TD LT-Kngang-TDLT-don-thay LT-Kdoc-thay LT-Kngang-thayLT-don-moi LT-Kdoc-moi LT-Kngang-moiH-don-TD H-Kdoc-TD H-Kngang-TDH-don-thay H-Kdoc-thay H-Kngang-thayH-don-moi H-Kdoc-moi H-Kngang-moi
Then, I use command DAL; I can select dimension want use.
AutoCAD Dynamic Blocks :: Stretch A Hatch In Dynamic Block?
Jul 4, 2013How do I stretch a hatch in dynamic block? It does not seem to work if I select the hatch along with other lines of a counter block.
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: Keep Item Centered In Dynamic Block?
Mar 5, 2012I have an X centered as my insertion point.
When I stretch the dynamic block for a larger area the X stretches but into the next single box but not centered within the double space.
how to get the X to be centered in the box when it is enlarged to a double or triple size?
AutoCAD Dynamic Blocks :: Mirrored Rotation Dynamic Block
Jun 14, 2012Is it possible to mirror a rotation within a dynamic block?
See the attached drawing. I am trying to have two rotations within a dynamic block, but only one grip. When the grip is rotated one half of the block rotates while the other half rotates in reverse. The resulting action would be much like the wings of a butterfly.
I have tried many different combinations of parameters, actions and constraints with no luck. The block in the attached file was as close as I could get. Have I reached the end of what AutoCAD is capable of?
AutoCAD Dynamic Blocks :: Dynamic Block Linear Array?
May 5, 2012I have a block of a roof screen. What i want to do is to stretch it & have the slats on the front & also the supports on the rear array @ different intervals. The slats on the front would array every 6-1/2" (The slats are 5-1/2" wide with a 1" gap). The supports array every 4'-0". I have tried to do this multiple ways with mixed results. How to get my desired outcome. I am enclosing my block.
View 5 Replies View RelatedAutoCAD Dynamic Blocks :: Selecting A Edited Dynamic Block?
Mar 28, 2011I have the attached file as a dynamic block.
Last week I opened the drawing and added some visibilty states etc. to the block.
Now when I open the block or insert it into another drawing for whatever reason the cursor or crosshairs stop at the edge of the block. And if you move towards the middle of the block where there isn't any lines etc. the cursor will move to that point until you hit another line then it will stop moving again.
I've been reading some other posts for different dynamic block topics/issues and read that everyone has problems when you get to higher numbers of visibility states, but when I edited last week I only added 7 states. Is that enough to make this happen? It sounds like everyone else that is having problems has far fewer visibility states than on the attached drawing.
AutoCAD Dynamic Blocks :: Moving Dynamic Block With Attributes
Dec 19, 2011I made a dynamic block with attributes. The block was to be moved using Linear parameter + move action, and then a lookup parameter and action.
The block moves as it is suppose to but the attributes are left behind. How can I get the attributes to move with the dynamic block?
The attribute properties are:
Verify = Yes.
Lock position: Yes or No don't seem to make a difference.
Is this a bug in AutoCAD or is there a solution to this?