I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
How to create a lisp to automatically export attributes from selected blocks to defined txt file without having to everytime confirm the file name, location and if the file shall be replaced?
Meaning is that I often export attributes to txt file for further use. It is always the same file (I just overwrite it always).
The way I do it now is selecting blocks, using ATTOUT command, then going to the desktop, selecting ATT.txt file and confirming that it is to be replaced.
Is there a way to make lisp or script that will just do all it in at once?
I found on forum such a lisp as below, but it exports all ablocks on drawing and it exports to txt file which is located in same place as drawing and with same name as drawing. Tried to modify it but without success:
(defun cut-att ()
(load "attout")
(setq fna (strcat (getvar "dwgprefix")
(acet-filename-path-remove (acet-filename-ext-remove (getvar "dwgname")))
".txt"
))
(setq ss (ssget "X" '((0 . "INSERT") (66 . 1))))
(bns_attout fna ss)
)
Same question for ATTIN - I use attin and always same file name from same location - how to automate it with one command?
I was on an older cad and am now moving to 2014.. my previous cad was heavily customized the old school way, I have decided to learn the CUI (and dynamic blocks)
My old cad has blocks on a drop down menu.. click BATH menu than WC icon, a macro sets the correct layer than inserts the WC.. took time to setup but pretty simple and straight forward (see attached for menu syntax). I also made a toolbar BATH and on that toolbar I made a WC icon.. that’s what I use the most
couple of questions
1) do I have to make a new command in CUI for each block to do the same thing?
2) I looked into the design center, but seems like its too many steps but it seems a toolbar with an icon on it, clicking the icon and a macro sets layer and insert block is still pretty quick..??
3) if a toolbar with an icon is still a fast and less step method, can I open the block and somehow make an icon of it? if so where do I put it?
I have this code w/ which I can open up Block Library Blocks for editing. We have R2012 installed w/out VBA.Our MIS department is impossible to deal with. We have this new fangled permission hysteria so I cannot install VBA myself.Is there any other way to open up my blocks? What I can I do instead?
(defun CpL () (prompt "...Open Library Block or Xref...")(terpri)
(setq a (entsel)) (setq b (car a )) (setq c (entget b)) (setq d (assoc 2 c))
(setq e (cdr d)) (setq ff (strcat e ".dwg")) (setq PP (findfile FF))
(setq opath (strcat "acadapplication.documents.open ""PP"""))
(command "vbastmt" opath))
My drawing constitutes of many blocks and other objects , and i need to find specific blocks (with same block name) in my drawing which i cannot find them one by one and i though that i can find them all with lisp routine ..
so , i wanna specify point out of my drawing area and lisp routine will draw to line from basepoint of those blocks to specify point when i select one reference block.
We've recently converted all our microstation drawings to autocad now that the company has decided to go with one cad program company wide.
One of the issues we are having after getting the drawings back from the this co. converting them is the cells to blocks convertion inside the drawing. when we open a drawing and see a "Fuse" block for instance and if it a has multiple inserts, it named them:
Fuse
Fuse_1
Fuse_2 etc....
is there a lisp routine or some command that would replace the "Fuse_*" blocks with "Fuse"..I've been searching the forums and know about the express tool Replace Block but need to be able to automate somehow.
I thought about trying to rename each of the "Fuse_*" but of course it won't let you rename to a block name that already exists..
would like to set a base point during insertion of one block.When not insert by AutoLISP, just type "b" to be able to change the base point.
But when I'm using an AutoLISP that inserts a block, it does not work, it interrupts the sequence of routine.
Lisp:
(defun c:carrobox()(setq #clayer (getvar "clayer")) (if (= unidades nil)(setq unidades "cm")).....
I've been trying tons of different solutions to solve this problem: insert a block that has an attribute which happens to be the last object id.
This is the best code I tried so far but without any succss.
(defun c:q1()
(command "_.PLINE")
(while (= (getvar "CMDNAMES") "PLINE")
(command pause)
[Code] .....
I wanted to flatten arcs, circles and lines inside a block using the following lisp (which I found in this forum). I found that sometimes this lisp is unable to flatten the ARCs inside the blocks. I do not understand why it is not working for all the blocks. I have attached a drawing in which this lisp is not working.
(defun c:FlattenRaj ( / blocks stpt enpt inspt )
(vl-load-com)
(setq blocks
(vla-get-blocks
(vla-get-activedocument
[code].......
I'm using the attached lisp to change the parameters of a dynamic block. In particular, I use the function chgdynprop
(defun c: test () (setq oggfreccia (car (entsel))) (chgdynprop (Vlax-ename-> vla-object oggfreccia) "Distanze1"300.0))
The lisp function works properly, because if I select the block from the bar I can see that property Distanze1 = 300.0
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies View RelatedI want to find a Lisp routine for building rooms (bedroom, bath, kitchen etc). example: I want to build a bedroom and every bedroom has the following blocks: smoke detector, door, window, bed, night stand, closet. Is there a way to run a lisp routine that would just ask me for basepoints and rotation angles of all those blocks? Basically it would automate building a bedroom by inserting all the blocks for me and just prompting me for basepoints + rotation angles.
Would a macro be better suited for this? I want to do one for every room - kitchen, bath, bedroom, living, dinning etc. I already have a nice collection of blocks.
I'd like to use AutoLisp to modify and in some cases replace existing dynamic blocks in a drawing. How can I retrieve existing values and then modify values for the following:
1. Visibility states
2. Distances
3. Rotation angles
4. Flip states
I have an XREF that contain block inserts sometimes nested 2 or 3 levels deep. Given the block names, is it possible to find and translate the insertion point of the nested inserts to the current World UCS?
Ideally I would give a routine the block name and it would scan the current drawing and return a list of the translated insertionpoints>
Lisp routine to count the number of dynamic blocks of a specific name ("FD") by windowing an area of the drawing. I have a routine that I've been using to accomplish this, but i don't understand why it doesn't count dynamic blocks.
(DEFUN C:LOCATEFD(/ BLKNAME BLOCKSET TOTAL)
(SETQ BLKNAME "FD")
(PROGN(SETQ BLOCKSET(SSGET(LIST(CONS 2 BLKNAME))))
(IF(= BLOCKSET NIL)
[Code] ....
I want to explode all anonymous blocks, but how do I create a selection set of them.?(ssget "x" '((2 . "*U*"))) doesn't work, and is dangerous if you have any blocks with the letter 'u' in them.
View 9 Replies View RelatedI need a function that will allow me to do a "divide" with blocks but I need the single attribute to remain intact.
I need the blocks to align with object and keep the attribute. I did get it to work with constants but the function that I need to run next failed because of the constant. My variable is preset and locked.
i have created an Autolisp routine that creates a drawing made up of structural members, x-refs & surfaces based on a few different user inputs. I now want the program to insert the drawing as a block rather than individual elements. My Idea was simply to use the block command in the lisp routine to create a block and then have the drawing create itself in block editor, and close once it has done. however I am having difficulty thinking of a way that I can get AutoCAD to automatically name this block depending on other blocks in the drawing, i.e. in sequence. The name is irrelevent really, but it would make sence for it to be logical, so... if the last block inserted was "b7" then the next one should be "b8" and so on.
Is there a better way of doing it all together? I have read a bit into "entmake" but i'm not sure on how to use that function.
I have 30 blocks per drawing about 60 drawings. Each block starts with the jobname has other block info and then the block type. For example
Bldg31-MechEquip_ABC
Bldg33-MechText_DEF
Bldg45-ElecEquip_GHI
I want the output to be just ABC, DEF, and GHI.
I have a rename script but I dont know where to go from here. How can I tell it to remove everything up and including the "_" symbol?
i need a vlisp program to draw polyline between two blocks.
View 3 Replies View RelatedI want to code this lisp. The problem which I face is, In some drawings which come from the client, there are a lot of blocks.
I want to detect the blocks which has no sub-entities (but attribute) and add a rectangle inside this block, If it is an attribute add a line from 0,0, to insertpoint of attribute.
I wonder if it is possible to have a routine that captures the visibility name of a dynamic block and place it in a text in the drawing?
For example, I have a block with 10 visibilities. I copied this block 10 times in the project and I put each one with a different visibility. Now I would like to make a label with the name of each visible state next to each block.
1) I want to search the drawing for the pre-define block names given in the program.
2) If the are there, I want to replace them with the new version.
3) Program replaces the first block it finds, then tries to insert that block.
I would like to batch rename all blocks in a drawing to NEWJOB01, NEWJOB02 ,etc. I can't use wildcards with RENAME command because the old names don't always have a common name. I prefer to use a lisp routine.
View 9 Replies View RelatedThe code below collects empty blocks with the intent to delete them.However, it appears that if an Xref is currently 'unloaded' it apparrently collects that too. I could probably just test to see if the block is an Xref and avoid it... but how could I modify this to check if it is loaded and still empty?
(defun NullBlocks (/ block *thisdwg* block nullblocks)
(setq *thisdwg* (vla-get-activedocument (vlax-get-acad-object)))
(vlax-for block (vla-get-blocks *thisdwg*) ;iterate block table
(vla-get-Name block)
(if (= 0 (vla-get-count block))
(setq nullblocks (cons (vla-get-name block) nullblocks))
)
)
nullblocks
)
This time I'm wrestling with getting the values from multiple blocks. The blocks all have the same name but at least the attributes have names this time. Each block have exactly 4 attributes, like: att1 (a number representing chronological order), att2 (some data), att3 (the actual date as a string of when the data was added), att4 (some more data)
I need to get and store the attribute's values. I was hoping to make a selectionset of the blocks and step through using the chronological order number.
At this point I have tried several combinations of foreach and ssget "x" (list (cons 2 MYBLOCK)), but I keep getting errors that I'm sure are telling me that I'm not passing the correct information to the function for iterating through. I'm banging my head.
(DEFUN c:GFOR (/ ATTLST REVBLK CNT CNT1 BLK RBLK ATTVAL ATT REV#)
(SETQATTLST(LIST "R#" "INIT" "DATE" "DESC")REVBLK(ssget "x" (list (cons 0 "INSERT") (cons 2 "REVISION")))CNT0CNT10 )
(vlax-ldata-put "dict" "RevTotal" (BLKCNT "REVISIONS")) (FOREACH BLK REVBLK (SETQ RBLK (ssname BLK CNT1)) (setq ATTVAL (mapcar '(lambda (x) (vla-get-TextString x)) (vlax-invoke (vlax-ename->vla-object RBLK) 'GetAttributes))) (foreach ATT ATTLST (SETQ REV# (STRCAT "REVISION" (1+ CNT)))
(vlax-ldata-put "dict" REV# (member ATTVAL)) (setq CNT (1+ CNT)) ) (SETQ CNT1 (1+ CNT1)) ) (PRINC))
how to open an dynamic block DWG using a script and not have the "This drawing contains authoring elements. Do you want to open in block editor" message?
I cannot seem to get rid of this message and everytime I have to manually say "No" and let the script run.
i have found the following lisp in a previous thread: (shows XY coordinates of the selected blocks)
(defun C:MyFunc (/ ss Index Ename Lst)
(while (or (not ss) (= 0 (sslength ss))) (setq ss (ssget '((0 .
"INSERT")))))
(if ss
[Code]....
I want this information to be added to the blocks as hidden attributes so that i can extract them by attout. The work to be done is : attout to excel, autofill an attribute (numbering) then attin.
but my problem is that i cant think of a way to number those blocks IN ORDER (ie top to bottom or left to right) unless by sorting them in excel first by their x or y coordinates
I want unexplodable blocks to be explodable. I know thr is explodable property of a block.but don't know to use lisp...
View 6 Replies View RelatedI have a lisp routine that uploads all the blocks contained within a specific folder and inserts or redefines all blocks of the same name within the current drawing.
My problem is that when I run the routine I prompts me that it can't fine the folder? I created a folder called "blocks" and is located straight onto my C:..........but it still doesn't work.
;FUNCTION TO UPDATE ALL BLOCKS WITHIN A DRAWING
;FROM A SPECIFIC DIRECTORY
(defun c:bup()
(SETVAR "cmdecho" 0)
(setq sst (ssget "X" (list (cons 0 "INSERT"))))
(setq c1 0)
[code].......