My drawing constitutes of many blocks and other objects , and i need to find specific blocks (with same block name) in my drawing which i cannot find them one by one and i though that i can find them all with lisp routine ..
so , i wanna specify point out of my drawing area and lisp routine will draw to line from basepoint of those blocks to specify point when i select one reference block.
I having real difficulty finding a lisp that will find and replace blocks. There are plenty out there and AutoCAD 2013 and lower has a Find and Replace Blocks. However, the frustrating catch is I can seem to find a routine that will allow me to replace only those blocks that I select with a selection set of my choosing. The built in function replaces all of them and will not let you exclude some. We have PID drawings that we want to replace valves on, but not all valves. We don't want to rename. We don't need to BEDIT the existing block.
1) Pick group of blocks
2) specify a new block that will replace all instances of old block
3) replace inserted block with different block. Leaving others alone.
I'm thinking this should be easy, but my search has failed. The blocks in question are not dynamic or attributed either.
I am trying to add an on and off checkmark via lisp to an item in a pull down menu.
It can be done with diesel but only on system variables.
In my case i can't use sysvars - only lisp.
I tried (menucmd ....) but I get nil.
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedI was on an older cad and am now moving to 2014.. my previous cad was heavily customized the old school way, I have decided to learn the CUI (and dynamic blocks)
My old cad has blocks on a drop down menu.. click BATH menu than WC icon, a macro sets the correct layer than inserts the WC.. took time to setup but pretty simple and straight forward (see attached for menu syntax). I also made a toolbar BATH and on that toolbar I made a WC icon.. that’s what I use the most
couple of questions
1) do I have to make a new command in CUI for each block to do the same thing?
2) I looked into the design center, but seems like its too many steps but it seems a toolbar with an icon on it, clicking the icon and a macro sets layer and insert block is still pretty quick..??
3) if a toolbar with an icon is still a fast and less step method, can I open the block and somehow make an icon of it? if so where do I put it?
I have this code w/ which I can open up Block Library Blocks for editing. We have R2012 installed w/out VBA.Our MIS department is impossible to deal with. We have this new fangled permission hysteria so I cannot install VBA myself.Is there any other way to open up my blocks? What I can I do instead?
(defun CpL () (prompt "...Open Library Block or Xref...")(terpri)
(setq a (entsel)) (setq b (car a )) (setq c (entget b)) (setq d (assoc 2 c))
(setq e (cdr d)) (setq ff (strcat e ".dwg")) (setq PP (findfile FF))
(setq opath (strcat "acadapplication.documents.open ""PP"""))
(command "vbastmt" opath))
how to check snap errors in drawing in a specified layer against some other layer. means first layer should end with second layer otherwise place error.both layers have linear features.
View 7 Replies View RelatedWhat would be the ideal way to find out the overlapping text.
View 9 Replies View RelatedI would like to get the cell with a specific name in Excel.
In Excel you can give a cell a custom name like "Project_Name".
How do I get the sheet and cell(row,column) of the cell with this custom name ?
We use multi-leader objects in our drawings. When the multi-leader and its value are to be replicated throughout the drawing, we create mleaders with fields that show the contents of the first mleader. That way we can update only the value in the first mleader and all of its children will update as well. It works nicely for us.
Here comes one snag. If one of us opens a drawing with which we are not intimately familiar, we don't know which mleader is the parent of which children. There might be fifty parents and four hundred children in a drawing so going through them by hand is a big productivity drain.
What I need to do is write a routine that will let the user select the mleader that includes the field and have the routine highlight and/or zoom to the parent object.
I thought I should be able to find that info in the dxf codes for the mleader, but I am either missing it or it's not there.
We've recently converted all our microstation drawings to autocad now that the company has decided to go with one cad program company wide.
One of the issues we are having after getting the drawings back from the this co. converting them is the cells to blocks convertion inside the drawing. when we open a drawing and see a "Fuse" block for instance and if it a has multiple inserts, it named them:
Fuse
Fuse_1
Fuse_2 etc....
is there a lisp routine or some command that would replace the "Fuse_*" blocks with "Fuse"..I've been searching the forums and know about the express tool Replace Block but need to be able to automate somehow.
I thought about trying to rename each of the "Fuse_*" but of course it won't let you rename to a block name that already exists..
would like to set a base point during insertion of one block.When not insert by AutoLISP, just type "b" to be able to change the base point.
But when I'm using an AutoLISP that inserts a block, it does not work, it interrupts the sequence of routine.
Lisp:
(defun c:carrobox()(setq #clayer (getvar "clayer")) (if (= unidades nil)(setq unidades "cm")).....
I've been trying tons of different solutions to solve this problem: insert a block that has an attribute which happens to be the last object id.
This is the best code I tried so far but without any succss.
(defun c:q1()
(command "_.PLINE")
(while (= (getvar "CMDNAMES") "PLINE")
(command pause)
[Code] .....
I wanted to flatten arcs, circles and lines inside a block using the following lisp (which I found in this forum). I found that sometimes this lisp is unable to flatten the ARCs inside the blocks. I do not understand why it is not working for all the blocks. I have attached a drawing in which this lisp is not working.
(defun c:FlattenRaj ( / blocks stpt enpt inspt )
(vl-load-com)
(setq blocks
(vla-get-blocks
(vla-get-activedocument
[code].......
I'm using the attached lisp to change the parameters of a dynamic block. In particular, I use the function chgdynprop
(defun c: test () (setq oggfreccia (car (entsel))) (chgdynprop (Vlax-ename-> vla-object oggfreccia) "Distanze1"300.0))
The lisp function works properly, because if I select the block from the bar I can see that property Distanze1 = 300.0
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies View RelatedI want to find a Lisp routine for building rooms (bedroom, bath, kitchen etc). example: I want to build a bedroom and every bedroom has the following blocks: smoke detector, door, window, bed, night stand, closet. Is there a way to run a lisp routine that would just ask me for basepoints and rotation angles of all those blocks? Basically it would automate building a bedroom by inserting all the blocks for me and just prompting me for basepoints + rotation angles.
Would a macro be better suited for this? I want to do one for every room - kitchen, bath, bedroom, living, dinning etc. I already have a nice collection of blocks.
I'd like to use AutoLisp to modify and in some cases replace existing dynamic blocks in a drawing. How can I retrieve existing values and then modify values for the following:
1. Visibility states
2. Distances
3. Rotation angles
4. Flip states
I have an XREF that contain block inserts sometimes nested 2 or 3 levels deep. Given the block names, is it possible to find and translate the insertion point of the nested inserts to the current World UCS?
Ideally I would give a routine the block name and it would scan the current drawing and return a list of the translated insertionpoints>
Lisp routine to count the number of dynamic blocks of a specific name ("FD") by windowing an area of the drawing. I have a routine that I've been using to accomplish this, but i don't understand why it doesn't count dynamic blocks.
(DEFUN C:LOCATEFD(/ BLKNAME BLOCKSET TOTAL)
(SETQ BLKNAME "FD")
(PROGN(SETQ BLOCKSET(SSGET(LIST(CONS 2 BLKNAME))))
(IF(= BLOCKSET NIL)
[Code] ....
I want to explode all anonymous blocks, but how do I create a selection set of them.?(ssget "x" '((2 . "*U*"))) doesn't work, and is dangerous if you have any blocks with the letter 'u' in them.
View 9 Replies View RelatedI need a function that will allow me to do a "divide" with blocks but I need the single attribute to remain intact.
I need the blocks to align with object and keep the attribute. I did get it to work with constants but the function that I need to run next failed because of the constant. My variable is preset and locked.
i have created an Autolisp routine that creates a drawing made up of structural members, x-refs & surfaces based on a few different user inputs. I now want the program to insert the drawing as a block rather than individual elements. My Idea was simply to use the block command in the lisp routine to create a block and then have the drawing create itself in block editor, and close once it has done. however I am having difficulty thinking of a way that I can get AutoCAD to automatically name this block depending on other blocks in the drawing, i.e. in sequence. The name is irrelevent really, but it would make sence for it to be logical, so... if the last block inserted was "b7" then the next one should be "b8" and so on.
Is there a better way of doing it all together? I have read a bit into "entmake" but i'm not sure on how to use that function.
I have 30 blocks per drawing about 60 drawings. Each block starts with the jobname has other block info and then the block type. For example
Bldg31-MechEquip_ABC
Bldg33-MechText_DEF
Bldg45-ElecEquip_GHI
I want the output to be just ABC, DEF, and GHI.
I have a rename script but I dont know where to go from here. How can I tell it to remove everything up and including the "_" symbol?
i need a vlisp program to draw polyline between two blocks.
View 3 Replies View RelatedI want to code this lisp. The problem which I face is, In some drawings which come from the client, there are a lot of blocks.
I want to detect the blocks which has no sub-entities (but attribute) and add a rectangle inside this block, If it is an attribute add a line from 0,0, to insertpoint of attribute.
Where I can find the DXFIN command code? I want to examine it to see how it does what it does.
View 2 Replies View RelatedI want to know the correct way to find the offset origin of a layout in an AutoCAD drawing. Let say I have a drawing that has many items on it. And I create a layout showing just the items in the lower right corner of the drawing. I want to know the offset origin of this layout relative to the Model space.
I came across some LISP commands that are supposed to do just that:
(vl-load-com)(setq activelayout (vlax-get (vla-Get-ActiveDocument (vlax-Get-Acad-Object)) 'ActiveLayout ))(setq activeplotorig (vlax-get activelayout 'PlotOrigin))
Unfortunately, the commands don't seem to work because it always returns (0.0 0.0). That cannot be right.
How can I find a block with a specific name and get what the coordinates are? What we have is our Bill of Material is attributed blocks. I am attempting to change the first one. Well all of the lines that list the parts are seperate blocks with the same name. Now the Top Line of the Bill of Material is a different named block. If I can find the coordinates of this block I can then select the first line to do what I need to.
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
Actually I am not a Autocad Lisp person but I need to refer Autocad drawing for my workflow.
Is there a way in Lisp to find a certain, text or attribute in all files in a folder and if the file
contains that text to get the filename written to a txt file.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013