I am trying to add an on and off checkmark via lisp to an item in a pull down menu.
It can be done with diesel but only on system variables.
In my case i can't use sysvars - only lisp.
I tried (menucmd ....) but I get nil.
We have developed processes, standard operating procedures, work instructions (whatever you want to call it) for several tasks we do on a regular basis. More importantly, tasks that we don't do on a regular basis. On some processes, performing certain commands is a critical step in the quality of the product. I have also developed a lot of lisps to streamline these processes. Of course there are commands that just don't make sense to try and include into existing lisps.
The problem we're having though, is that people are not following the processes. I don't know if they think they are smarter than the process, or if they don't understand the process, or if they are just complacent.
One of the things that would really work to get everyone to follow the process, is to have my lisp routines check to see what the last entry at the command line was.
For example, if one of my lisps depended on the drawing be saved, well, instead of putting the save command in the lisp, sometimes it would be beneficial to check to see if the drawing was saved in the first place. Kudos to those who do follow the process, they do save the drawing, and then run the lisp. On rather large files, I would prefer not to save the drawing twice, back to back.
There are a lot more benefits to checking to see what the last user entry was, in a certain drawing.
My drawing constitutes of many blocks and other objects , and i need to find specific blocks (with same block name) in my drawing which i cannot find them one by one and i though that i can find them all with lisp routine ..
so , i wanna specify point out of my drawing area and lisp routine will draw to line from basepoint of those blocks to specify point when i select one reference block.
I want autolisp program to check overlap like in closed or open polyline with any other entity in the drawing, whether other entity is overlapping inside the polyline or not, i am beginner in autolisp and want to know exactly which functions are used or the program itself Also if possible to check circular overlap of one polyline with itself.
View 1 Replies View RelatedI have a List with values shown
A=(0 0.1 0.1 0.1 0.2 0.2 0.3 0.3)
I have to check that how many elements are the same and which one is the first and the last in the same elements.
Like 1.0 is the number 1 element and third element the the 3rd element. how can i Manipulate is Visual Lisp.
I've been working on a lisp to set up basic settings such as text styles, dim styles, discipline specific layers and things of that nature.
I have a prompt to ask for a discipline designator as a string. I want to have an If statement or a conditional to read that string and check for a "C" if it finds it I want to have it set up a dimstyle to decimal feet ect and if not do it as architectural units.
This is just a test lisp that I'd like to add to the main one listed above...
(defun c:test(/ disc dsnm dsna)
(setq disc (getstring "
Discipline (G,C,S,M,E,CP): ")) ;Prompt for Discipline
(setq ds (getint "
Dimscale Factor: ")) ;Prompt for Dimscale
[code].......
How do I check, with LISP, if a System Variable is read only? In particular ANNOTATIVEDWG. This one is read/write when there are no annotative objects in a drawing, but read-only if there are.
View 7 Replies View RelatedI have 2 selection sets and I'm looking for a more elegant method of checking if both sets contain the exact same entities (note - the order of entities might be different).
View 9 Replies View RelatedI am trying to write a piece of a program that gets the layers from a drawing, and checks each one against a list of layers. If the layer is not a member of any of the lists it asks the user which layer list to add it to. This is what I have so far, but every time I try to run it I get a bad argument error.
(setq layerspresent (vla-get-layers (vla-get-activedocument (vlax-get-acad-object))))(setq i 0) (repeat (vla-get-count layerspresent)(setq thislayer (vla-get-name (vla-item layerspresent i)))(cond(((progn(or(= nil (member thislayer 0list))(= nil (member thislayer detaillist))(= nil (member thislayer clearancelist))(= nil (member thislayer clearanceelist))(= nil (member thislayer doorsdrawerslist))(= nil (member thislayer hiddenlist))(= nil (member thislayer hiddenelist))(= nil (member thislayer deletelist)))));ifs((progn(initget "0 DEtail CLearance CLEarance-e DOOrs-and-Drawers HIdden HIddEn-E DELete")(setq userchoice (getkword "
[code]...
Depending on the user's choice the layer gets written to an external file where the layer lists get their layers from in the beginning and then adds the layer to the relevant list to use later in the program.
how can I check whether an object has a reactor connected?
I wrote the following
(defun c:**** (/ ogg collegaReactor) (setq ogg (car (entsel))) (setq collegaReactor (vlr-object-reactor (list (vlax-ename->vla-object ogg)) "NOMEAPP" '( (:vlr-modified . testedit) (:vlr-objectClosed . endedit) ) ) ))(defun testedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "testedit"))(defun endedit (notifier-object reactor-object parameter-list / ogg collegaReactor) (alert "endedit"))
If I start two or three or more times the "c:****" and select the same object, when I changethe "alert" appear several times.
I have redined AutoCAD's copy command alias to C, but to also do other things, like set a few important variables in the background. One of the lisps I've incororated are making new viewports, that also create layers that are visibly specific to the viewport being created.
We were tasked a while ago to do an easy job of copying entities (dimensions, text and what not) in a layout. The problem is, users are copying the viewports too, which is bit more ineffificent than using the create viewport command I developed.
Is there a way to see if a selection set includes (0 . "VIEWPORT") entities? If the check returns nil, well then all is good. If the check returns "true", then I can prompt the user that a "VIEWPORT" entity is selected. I can then exit the command, or ask the user if they are sure they want to copy the "VIEWPORT" entity.
I have a block with:
tag1: XX
tag2: YYYYYY
tag3: ZZZZZZZZ
I have an external file check.txt with string:
XXYYYYYYZZZZZZZZ
I would like to create a lisp program that check the attributes of block using an external database, if tag1+tag2+tag3 = XXYYYYYYZZZZZZZZ ok end program, if not make a circle on block :
Without opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
How can I get the position (POPn ) where a menu is, considering the other menus loaded (ACAD, Expres.. etc)
For example:
File Edit View Insert . .Express WIndow Help DOBLADO PCSMEN. .. and I need to know the position of DOBLADO.
I have tried to find information about this, but I am having a hard time. So i need to explain what I am doing.
I would like to be able to use commands stored in the cui menu file, initially this is done using our tablets, but our tablet drivers cannot work with windows 7 and autocad, nor can i get any that do, (i have tried over 20 different drivers).
So, instead of making a lisp function for every macro. I need to be able to use some of them.
Can I execute one of these macros using "MENUCMD" ? , I have all the information i need to do it but cannot figure it out menucmd does not seem to have an option to actually run the macro, and if it does It only seems to be able to do that with popup menus.
Currently i use the ribbon and add them in there, but want to know If i can do so just with lisp. and create my own on-screen tablet menu.
Here is an example of one of the macro's in the cui i need to use.
And here it is in the cui menufile:
UNDER-> <MacroGroup Name="User">
<MenuMacro UID="MMU_WT1[A-5]">
<Macro type="Any">
<Revision MajorVersion="17" MinorVersion="1" UserVersion="1" />
<ModifiedRev MajorVersion="17" MinorVersion="2" UserVersion="1" />
<Name xlate="true" UID="XLS_6804">WT1[A-5]</Name>
<Command>^C^CDTEXT C .125 0 </Command>
</Macro>
So.. that is my question how can i use that command via lisp..
I would like to use the following macro from the LDD 2004 Civil menu (yes, we are still using 2004!): ^C^C^C^P(cd_mnl)(zz_sdsk '(ad_xsutl 2));LDD. The macro is Zoom to Station from the Cross Section pulldown menu. How to use this in a LISP routine, or an equivalent LISP command? (The user won't be supplying the station number. The station number will be extracted from a selection set of objects with attribute blocks with equivalent station numbers.)
Each cross section has an attribute block associated with it, which lists all the details for that section, including station. The macro must be using that block (listed in a database, perhaps?) to find the station in the dwg.
I am upgrading from 2010 to 2013 and am having a problem with my image tile menu not showing my slides. The dialog box comes up but none of the slides can be viewed. I am using the macro $I=acadbja.GENPLAN1 $I=* Is there an updated command the super cedes this command?
View 1 Replies View RelatedDuring the creation of an Enterprise CUI, I somehow was left with Unresolved Menu groups, as shown in the attachment. Any thoughts on how these can be removed?
View 9 Replies View RelatedWe have had custom toolbars for many years that included custom pop menus etc. Now that we are running cuix customizations how do I edit these customized pop menus? Do I need to rewrite this stuff in lisp, vba, .net, whatever?
View 1 Replies View RelatedI would like a small menu to pop up near the cursor like the middle mouse button menu, but based on some other function key or quick key shortcut.
View 2 Replies View RelatedI have some legacy menus that are quite large. I have tried to create a new workspace, and that seemed to work o.k.
UNTIL I used menuload to try to load the old menu. At the point all the defualt workspaces were wiped out somehow.
I would like to have access to both the default workspaces and then also by switching to a custom workspace, my legacy menus.
I read Robert Bell's document “Migrating from MNU to the CUI” (Autodesk University 2007) with interest. I have been using 2005 up until now and I am finally forcing myself to get to grips with 2010.
I managed to get it to work after much trial and error through the CUI transfer interface.My customizing makes use of a lot of swapping pull-down menus, which swap in and out based on current later setting.A typical command would be:
(MENUCMD "P15=RCASPOPS.mfireeqp") where RCASPOPS is my swapping menu loaded at POP15.
Then I would use (MENUCMD "P15=*") to force the “mfireeqp” area of the pull-down menu to display.Trouble is, when I CUIload RCASPOPS, it does not seem to recognize the various areas of the menu.Here is a part of that subsection of RCASPOPS:
***MFIREEQP
[FireProtEquipLayers]
[--]
[0]0;
[defpoints]defpoints;
[X-Refs]x----ref;
[code]...
Typically the whole of RCASPOPS is loaded but when I try to force it to display, the whole of it pops on the screen (well, the top of the file does anyway) and not just the subsection I want.
Is this a syntax issue with the newer AutoCad?Also notice that I use the -> and <- for fly-out sections of the menu - is there a syntax issue with this? I notice that the future support of drop down swapping menus is not guaranteed. What is the alternative?
I have made an extra CUI that is loaded as a partial CUI.
Now I want to add a context-sensitive shortcut menus like this: POP504, OBJECT_AEC_DOOR.
The problem is that this shortcut menu only shows up if I add the shortcut menu to the main CUI file. If I add it in some partial CUI it never shows.
Does shortcut menus only work from within the main CUI?
Switching from 2010 win xp to 2014 win 7. I need my specific user interface , and cant replicate it because of this issue :
I used to press context menu key on keybard to make edit menus pop up . In 2014 even though its same settings (show context menus and time sentive click) i ve lost this ability .
Either menus dont appear at all or they are replaced by the small command line context menu. I think this suggest new command line features are messing with right click options any variable i can turn off , or else to go back to normal.
I have a company .cuix menu that is loaded as a partial menu to the main acad.cuix file. I want to delete all the toolbars and pull down menus associated with it and leave the other stuff in place. This is in Autocad 2011 but should also translate to 2013. So far, I have tried opening the CUI menu, going to the company.cuix partial menu and deleting the toolbars. Then I hit save, then Apply. Toolbars disappear and pulldown menus go away. But when I reload AutoCAD they come back.
View 1 Replies View Relatedthrough the groups here I have found the redefine screenmenu command, but I cannot find how to get the screen menu up on the screen as it is not an option in the display options any longer.
View 4 Replies View RelatedI doubt there is since they aren't listed in the control keys list in the help file, but it doesn't hurt to ask. I'm trying to simulate the CTRL+PG UP/DN feature of Excel to switch between tabs. I'm might just have to 'up' and 'down' arrow keys.
View 8 Replies View RelatedI have a small number of drawings that I use very often. I would like to make a menu item to open a certain drawing but I keep getting stuck when the drawing name should be entered automatically.I use the code
^C^Cfiledia;0;open;"test.dwg";filedia;1;
The drawing is my support file search path and the name is unique. How do I get this to work properly?When running this command:
Command: filedia
Enter new value for FILEDIA <1>: 0
Command: open
Enter name of drawing to open <C:previous.dwg>:
*cancel*
Command: "test.dwg"
Unknown command ""TEST.DWG"". Press F1 for help.
Command: filedia
Enter new value for FILEDIA <0>: 1
It asks what file to open and suggests the last opened file, and whatever I tried so far this keeps happening.
*.scr files are not allowed on our network, I can't create or rename files to *.scr. Of course I could ask the admins to allow this but I think our security policy is more important than me having a button to open a file.
i have in Drive C a file "Steel.lsp" have function called IPE
in this function have this line
(setq n (getstring "
Enter IPE Height :"))
i loaded it
i created a menu and command in it called "Amr"
no i need when i click Amr Run IPE with string 270 then click enter
i need all this happen automaticlly when i click on "Amr" on menu
how???
Technique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
have had the good fortune to have recieved a Christmas present (o.k. to myself) a new Dell 30" monitor with 2560 x 1600 resolution.
The only thing I am finding troublesome as you might be able to see by the attached screen shot, is that now my autocad menus are, as expected at the top of the screen. This new size of monitor brings with it the problem that you now have to travel your mouse a great distance to reach the menu bar items.