would like to set a base point during insertion of one block.When not insert by AutoLISP, just type "b" to be able to change the base point.
But when I'm using an AutoLISP that inserts a block, it does not work, it interrupts the sequence of routine.
Lisp:
(defun c:carrobox()(setq #clayer (getvar "clayer")) (if (= unidades nil)(setq unidades "cm")).....
I need a function that accepts a block name as an argument and will insert the named block without fail no matter if the block was made to scale uniformly or not.
How can I determine if the block should be inserted like:
(command "-INSERT" blkn "0,0" 1 0)
or:
(command "-INSERT" blkn "0,0" 1 1 0)
How do I change the insertion point of a text using "vla-put" ? I've tried using :
(vla-put-InsertionPoint en a)) with a = (4455.94 428.576 0.0)
and I get the following error:
lisp value has no coercion to VARIANT with this type: (4455.94 428.576 0.0)
wondering if is possible to have a lisp routine to:After use the INSERT command, the routine will automatically change the layer of the inserted block to a specific layer according of its name.
i.e.
Step 1 : I will insert a block named Block A using the normal autocad INSERT command (I do not want to insert the block without the Insert window dialog box)
Step 2 : After the insertion, the routine will select the last insertion (or the last object, or any other best way to select this block and will take it's name)
Step 3 : The routine has a list that says:
(If the last insertion (or object) is named Block A, put it in the layer Layer A with color Bylayer and linetype Bylayer)
(If the last insertion (or object) is named Block B, put it in the layer Layer B with color Bylayer and linetype Bylayer)
and so on... I can make the approprieated list by myself folowing my standards.
I think it will be nice to avoid an error if the block is not in the list. So:
(If the last insertion (or object) name is not in the list, do nothing)
To finish, it will be nice to create the layer if it does not exist. Also, Unlock, Thaw and Turn on the layer if it's Locked, Frozen or Off.
How can I find a block with a specific name and get what the coordinates are? What we have is our Bill of Material is attributed blocks. I am attempting to change the first one. Well all of the lines that list the parts are seperate blocks with the same name. Now the Top Line of the Bill of Material is a different named block. If I can find the coordinates of this block I can then select the first line to do what I need to.
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
I have insert blocks in my dwg. It is the circle. While creating the block, i was just pick the point into the circle not exactly at the centre.
Now i want change the insertion point of the block at centre of the circle without moving the objects from the dwg.
Beacuse i had use block editor to change the insertion point. But after changing, all blocks were moved from the original position.
My multileader style uses a block as a content. How can I find world coordinates of insertion point of block entity within multileaders?
View 3 Replies View RelatedWe have several AutoCAD drawings with hundreds of block references inserted with imprecise coordinates. Now we need to dimension all elements and need to correct these positions.
I am searching for a routine to round these positions up or down towards a 5mm precision so I don't have to manually move every single block element.
Is there any way to automate the task or do you know any workaround (like inserting the elements into a drawing with poorer unit precision settings)?
I've have code to test if the insertion point is within a closed polygon. But prior to testing the insertion point I use ssget to trim the selection set initially..
(ssget "CW" Pnt_List (list (cons 0 "INSERT")(cons 2 BlockName)))
this requires that the whole Crossing Polygon is visible, so I do a zoom first. This requires time. Is there a way I can do this that does not require the zoom?
We have been modifying a trim-around-block routine to have as few clicks as possible and though it feels like we'd be able to have the line to be broken auto-selected based off of the insertionpoint that was set as a variable.
;(setq pnt1 (getvar "lastpoint")
; sst1 (osnap pnt1 "nea")
;end setq
;(setq ss (ssget '((0 . "LWPOLYLINE")))) ; limited to Polylines
; (while (> (sslength ss) 0) ; as long as there's anything in [or remaining in] the selection set))
; (setq ent (ssname ss 0)
; paramcount 1
; ) ; first entity in [or remaining in] the selection set paramcount 1); end setq
are about the closest snippets of code that we've managed to find but neither of these are working.
How we can force the program to break the line without the user having to select the line (because they will have already selected the insertpoint, and using osnap nearest would find the line that requires breaking)
I have a drawing with various layouts that when I do a Zoom Extents the drawings is reduced to the size of a point.
I have done all the usual, ie: look for extra entities that are "out in space" so to speak and there are none.
I wonder if I have a block or image which may have an insertion point "out in space" and if this may be the issue.
Is there some way to Select all entities or Blocks (insertion point) that may exist outside a particular area ie: drawing limits.
Is there a way to modify the text insertion point of multileaders using lisp? We have a problem with some of our multileaders getting a landing distance set to a negative value. My lisp routine will correct these to a default value, but then the text jumps a bit. If I could get the insertion point prior to changing the landing distance then I could restore that point after changing the landing distance.
;;-------------------------------------------------------------------------------------------------(defun c:zld (/ e th dogleg doglegllength sf ss c mlss mlcount) (setqss (ssget (ssget "X" (list (cons 0 "MULTILEADER"))))DWATxtHgt (getvar "userr1")sf 1dogleg (/ 3 32.0)th (if dwatxthgt dwatxthgt dogleg)c 0mlcount 0mlss (ssadd)) (IF ss (while (< c (sslength ss)) (setq e (vlax-ename->vla-object (ssname ss c)) c (1+ c) ) (= (vla-get-ObjectName e) "AcDbMLeader") (progn;;change the dogleglength if
[code].......
(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
I have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedCreate a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
I was on an older cad and am now moving to 2014.. my previous cad was heavily customized the old school way, I have decided to learn the CUI (and dynamic blocks)
My old cad has blocks on a drop down menu.. click BATH menu than WC icon, a macro sets the correct layer than inserts the WC.. took time to setup but pretty simple and straight forward (see attached for menu syntax). I also made a toolbar BATH and on that toolbar I made a WC icon.. that’s what I use the most
couple of questions
1) do I have to make a new command in CUI for each block to do the same thing?
2) I looked into the design center, but seems like its too many steps but it seems a toolbar with an icon on it, clicking the icon and a macro sets layer and insert block is still pretty quick..??
3) if a toolbar with an icon is still a fast and less step method, can I open the block and somehow make an icon of it? if so where do I put it?
I have this code w/ which I can open up Block Library Blocks for editing. We have R2012 installed w/out VBA.Our MIS department is impossible to deal with. We have this new fangled permission hysteria so I cannot install VBA myself.Is there any other way to open up my blocks? What I can I do instead?
(defun CpL () (prompt "...Open Library Block or Xref...")(terpri)
(setq a (entsel)) (setq b (car a )) (setq c (entget b)) (setq d (assoc 2 c))
(setq e (cdr d)) (setq ff (strcat e ".dwg")) (setq PP (findfile FF))
(setq opath (strcat "acadapplication.documents.open ""PP"""))
(command "vbastmt" opath))
My drawing constitutes of many blocks and other objects , and i need to find specific blocks (with same block name) in my drawing which i cannot find them one by one and i though that i can find them all with lisp routine ..
so , i wanna specify point out of my drawing area and lisp routine will draw to line from basepoint of those blocks to specify point when i select one reference block.
We've recently converted all our microstation drawings to autocad now that the company has decided to go with one cad program company wide.
One of the issues we are having after getting the drawings back from the this co. converting them is the cells to blocks convertion inside the drawing. when we open a drawing and see a "Fuse" block for instance and if it a has multiple inserts, it named them:
Fuse
Fuse_1
Fuse_2 etc....
is there a lisp routine or some command that would replace the "Fuse_*" blocks with "Fuse"..I've been searching the forums and know about the express tool Replace Block but need to be able to automate somehow.
I thought about trying to rename each of the "Fuse_*" but of course it won't let you rename to a block name that already exists..
I've been trying tons of different solutions to solve this problem: insert a block that has an attribute which happens to be the last object id.
This is the best code I tried so far but without any succss.
(defun c:q1()
(command "_.PLINE")
(while (= (getvar "CMDNAMES") "PLINE")
(command pause)
[Code] .....
I wanted to flatten arcs, circles and lines inside a block using the following lisp (which I found in this forum). I found that sometimes this lisp is unable to flatten the ARCs inside the blocks. I do not understand why it is not working for all the blocks. I have attached a drawing in which this lisp is not working.
(defun c:FlattenRaj ( / blocks stpt enpt inspt )
(vl-load-com)
(setq blocks
(vla-get-blocks
(vla-get-activedocument
[code].......
I'm using the attached lisp to change the parameters of a dynamic block. In particular, I use the function chgdynprop
(defun c: test () (setq oggfreccia (car (entsel))) (chgdynprop (Vlax-ename-> vla-object oggfreccia) "Distanze1"300.0))
The lisp function works properly, because if I select the block from the bar I can see that property Distanze1 = 300.0
I am looking for a routine that will replace all blocks named "DgnMisc_nodepoleind" with a block named "DgnMisc_nodepoleind2" keeping the insertion point. I could use (command "-insert" "DgnMisc_nodepoleind=Y:/ACAD2007/DA settings/Library_new_scale1/DgnMisc_nodepoleind2.dwg" NIL ) but my problem is that the block I want to replace is used on two different layers and I only want to replace the ones on layer "TPSYM01".
View 3 Replies View RelatedI want to find a Lisp routine for building rooms (bedroom, bath, kitchen etc). example: I want to build a bedroom and every bedroom has the following blocks: smoke detector, door, window, bed, night stand, closet. Is there a way to run a lisp routine that would just ask me for basepoints and rotation angles of all those blocks? Basically it would automate building a bedroom by inserting all the blocks for me and just prompting me for basepoints + rotation angles.
Would a macro be better suited for this? I want to do one for every room - kitchen, bath, bedroom, living, dinning etc. I already have a nice collection of blocks.
I'd like to use AutoLisp to modify and in some cases replace existing dynamic blocks in a drawing. How can I retrieve existing values and then modify values for the following:
1. Visibility states
2. Distances
3. Rotation angles
4. Flip states
I have an XREF that contain block inserts sometimes nested 2 or 3 levels deep. Given the block names, is it possible to find and translate the insertion point of the nested inserts to the current World UCS?
Ideally I would give a routine the block name and it would scan the current drawing and return a list of the translated insertionpoints>
Lisp routine to count the number of dynamic blocks of a specific name ("FD") by windowing an area of the drawing. I have a routine that I've been using to accomplish this, but i don't understand why it doesn't count dynamic blocks.
(DEFUN C:LOCATEFD(/ BLKNAME BLOCKSET TOTAL)
(SETQ BLKNAME "FD")
(PROGN(SETQ BLOCKSET(SSGET(LIST(CONS 2 BLKNAME))))
(IF(= BLOCKSET NIL)
[Code] ....
I want to explode all anonymous blocks, but how do I create a selection set of them.?(ssget "x" '((2 . "*U*"))) doesn't work, and is dangerous if you have any blocks with the letter 'u' in them.
View 9 Replies View RelatedI need a function that will allow me to do a "divide" with blocks but I need the single attribute to remain intact.
I need the blocks to align with object and keep the attribute. I did get it to work with constants but the function that I need to run next failed because of the constant. My variable is preset and locked.
i have created an Autolisp routine that creates a drawing made up of structural members, x-refs & surfaces based on a few different user inputs. I now want the program to insert the drawing as a block rather than individual elements. My Idea was simply to use the block command in the lisp routine to create a block and then have the drawing create itself in block editor, and close once it has done. however I am having difficulty thinking of a way that I can get AutoCAD to automatically name this block depending on other blocks in the drawing, i.e. in sequence. The name is irrelevent really, but it would make sence for it to be logical, so... if the last block inserted was "b7" then the next one should be "b8" and so on.
Is there a better way of doing it all together? I have read a bit into "entmake" but i'm not sure on how to use that function.
I have 30 blocks per drawing about 60 drawings. Each block starts with the jobname has other block info and then the block type. For example
Bldg31-MechEquip_ABC
Bldg33-MechText_DEF
Bldg45-ElecEquip_GHI
I want the output to be just ABC, DEF, and GHI.
I have a rename script but I dont know where to go from here. How can I tell it to remove everything up and including the "_" symbol?