Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
I want to copy a value/text in cells from excel and paste it in specific mtxt that has been made in existing .DWG file.
I have done it by copy and paste, but it doesn't work effectively since there's too many cells to be pasted.
One of my cells entry which should be copy is in D5 and the coordinate of mtxt in autocad is (17,46 15,03 0,000) both of those file is located in same folder
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
When I copyclip a dimension from one drawing with UCS set to world/north, then paste into another drawing with UCS rotated in Z (south for example), the text remains oriented to north. The original drawing doesn't have to be set to world, just something different from the paste orientation.
Is there a way to have the text orient itself to the current UCS at paste?
I'm a creating a Right Click Menu on VBA Form to copy and paste text in Textboxes. I have got the code to work on one textboxt named "TextCat" in the Mouse up event. I would like to be able to use the same code on all textboxes (some in frames) on a form without having to duplicate this long bit of code and change the textbox name multiple times for every different textbox mouse up event. .
Here is the code for a textbox "TextCAt" mouseup
Private Sub TextCAt_MouseUp(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)'----------------------------------------------------------------------------------------------------'Right Click MenuDim Pt As POINTAPIDim ret As Long If Button = 2 Then hMenu = CreatePopupMenu() AppendMenu hMenu, MF_STRING, 1, "Cut" AppendMenu hMenu, MF_SEPARATOR, 3, ByVal 0& AppendMenu hMenu, MF_STRING, 2, "Copy"
[code].......
I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
View 3 Replies View RelatedI have not got the hang of layers but i need to copy text/letters from a scanned page
How do i do i copy and paste text from one jpg to create another. I have tried Ctl + c to copy but when i click the other layer to then Ctrl + A and then CTRL + P to paste like a youtbe video suggests, instead of the copied text being pasted on i get a dialogue window for the printer.
Why does Revit not allow the copy and pasting of text from, for example, the Formula box in a Family Types Dialog? There are other instances when this also manifests itself but I'm struggling with formulas currently and need to get on.
View 1 Replies View RelatedIllustrator CS5.5 on Mac: When I copy text from one Illustrator document and paste it in a different document, the text canges to Myriad (the deafult font). Is there a setting somewhere to preserve the formatting? Even pasting into an existing text style still changes the font.
View 39 Replies View RelatedIs there a way to copy/paste text in Photoshop without keeping formatting (font, size, color, etc)?
View 4 Replies View RelatedWhen I copied text over from Photoshop to illustrator it kept the text formatting. For example the font, font size, color. Now when I use CC and copy paste text from PS to AI, all text formatting is lost and everything is placed as whatever the current AI text setting is.
HOWEVER, pasting from AI to PS WORKS as it should. All font/text formatting is maintained. Is this a bug or is there a setting for this that I just never knew about?
How can I copy and paste text into a title frame? I have been unable to do anything but add the text manually every time.
View 4 Replies View Relatedi have a 2 artistic text blocks (both with different fonts) in same corel document and when i ctrl+c/ctrl+v from one to other it copy/paste not only the text but also font type/size and color.
I want just the text copied not all the properties.
For some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
We are having problems with text in Illustrator CS6.
1. When we copy / paste text within illustrator all color information is lost.
2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different random colors!!
For example: If we save an Illustrator document with a paragraph of text that is part red and part black when we re-open the same paragraph might be all gray, or orange or (you pick a color).
Mac OSX 10.8.2
So apparently:
Create a path snapped to pixel.
Disable align to pixel on all paths.
Select the entire path and create a new symbol with align to pixel disabled OR (it makes no difference) create a new symbol from a temporary path and then paste in place. Everything looks good. Paths are aligned to pixel.
Exit isolation symbol mode.
Go back into isolation mode.
All your paths are offset by miniscule amounts causing them to bleed into each other. You can't realign your paths with snap to pixel because snap to pixel doesn't work for a set of paths because it snaps to a random path or something.
Or you can enable align to pixel and have the copy paste completely mess up your paths.
Why would you expand paths that are snapped to pixel by a miniscule amount on a paste?
Is this fixed in CS6?
Copy and paste error — Text pastes at half-size.
When I copy and paste text already in my photoshop document, the text retains the styling but the text size is exactly half of what it should be.
I'm using the most recent version of CS6.
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
I am in the course of evaluating Xara, and it has a lot of good things going for it compared to Adobe, particularly in combining many of the features of ID and AI. The graduated color screening on objects is way better than AI.
However, I cannot find how to copy an object or text block and paste multiples at specific intervals. Both Pagemaker and InDesign have this feature, so I can't believe Xara overlooked it, as it is particularly useful when laying out say business cards 12 up on a sheet for printing. Yes, I have done a search on this forum and also studied Xara help files.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI'm simply creating a word on an artboard "Item #1" at 90pt bold and centered to the artboard. I now want to copy it a couple of times on the same artboard by holding down alt + shift and dragging beneath it to create new copies of the word with the goal of printing this artboard and using a paper cutter to make evenly cut labels.
1. How do I create a consistent amount of space between each label when I drag each copy down?
2. If I already have the labels on an artboard, how can I space them out so that there is an even amount of space between them?
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedWhen using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
One of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
I have been having a problem with AutoCad 2012 LT when a am working in the model space I can you the ctrl c and ctrl p commands for a short amount of time and then they will not work. I can open a different model space and they will work in that one, but when I go back to the original one the will not work. I have tried shutting down autocad and the computer, but when I open everything back up the commands still will not work in that model space. I have reinstalled autocad and that brings them back for a short amount of time.
View 5 Replies View Relatedis it possible to copy and paste parts in an assembly but also keeping any constraints set on the part?
I.e. if I had a square block constrained to a flat face of a floor, when I copy and paste the block many times I would like all the copy blocks to still be constrained to the floor.
LT 2011- I place a JPEG of a logo on my sheet in model space. Is there any way to manipulate it as in moving it, making it a tad smaller, etc.? Am I able to copy and paste it
View 1 Replies View Related