Why does Revit not allow the copy and pasting of text from, for example, the Formula box in a Family Types Dialog? There are other instances when this also manifests itself but I'm struggling with formulas currently and need to get on.
View 1 Repliesis there a way to cut/copy a view off of a sheet and paste it onto another sheet in the same exact location (paste aligned)?
For example i have three elevations on one sheet...i would like to keep one on that sheet and cut and paste the other two onto another sheet in the same locations...possible?
I am having a problem with copy/paste of drafting elements (detail lines, detail items) from one view to another. Basically, I am copying a detail of section created in a ‘Drafting View’ onto an actual wall ‘Section View’. Then I receive an error message that cannot be ignored saying [Cannot paste view-specific elements from different views]. So I am not sure what is happening. The elements that I am copying and pasting are mainly drafting work.
I also noticed that copy/paste part of the drafted work sometimes work. But when I copy the whole drafted work from ‘Drafted View’ to ‘Section View. It gives me the error!!
I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
View 3 Replies View RelatedI have not got the hang of layers but i need to copy text/letters from a scanned page
How do i do i copy and paste text from one jpg to create another. I have tried Ctl + c to copy but when i click the other layer to then Ctrl + A and then CTRL + P to paste like a youtbe video suggests, instead of the copied text being pasted on i get a dialogue window for the printer.
Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
Illustrator CS5.5 on Mac: When I copy text from one Illustrator document and paste it in a different document, the text canges to Myriad (the deafult font). Is there a setting somewhere to preserve the formatting? Even pasting into an existing text style still changes the font.
View 39 Replies View RelatedIs there a way to copy/paste text in Photoshop without keeping formatting (font, size, color, etc)?
View 4 Replies View RelatedWhen I copied text over from Photoshop to illustrator it kept the text formatting. For example the font, font size, color. Now when I use CC and copy paste text from PS to AI, all text formatting is lost and everything is placed as whatever the current AI text setting is.
HOWEVER, pasting from AI to PS WORKS as it should. All font/text formatting is maintained. Is this a bug or is there a setting for this that I just never knew about?
How can I copy and paste text into a title frame? I have been unable to do anything but add the text manually every time.
View 4 Replies View Relatedi have a 2 artistic text blocks (both with different fonts) in same corel document and when i ctrl+c/ctrl+v from one to other it copy/paste not only the text but also font type/size and color.
I want just the text copied not all the properties.
I want to copy a value/text in cells from excel and paste it in specific mtxt that has been made in existing .DWG file.
I have done it by copy and paste, but it doesn't work effectively since there's too many cells to be pasted.
One of my cells entry which should be copy is in D5 and the coordinate of mtxt in autocad is (17,46 15,03 0,000) both of those file is located in same folder
For some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER}
I know I can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
When I copyclip a dimension from one drawing with UCS set to world/north, then paste into another drawing with UCS rotated in Z (south for example), the text remains oriented to north. The original drawing doesn't have to be set to world, just something different from the paste orientation.
Is there a way to have the text orient itself to the current UCS at paste?
We are having problems with text in Illustrator CS6.
1. When we copy / paste text within illustrator all color information is lost.
2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different random colors!!
For example: If we save an Illustrator document with a paragraph of text that is part red and part black when we re-open the same paragraph might be all gray, or orange or (you pick a color).
Mac OSX 10.8.2
Copy and paste error — Text pastes at half-size.
When I copy and paste text already in my photoshop document, the text retains the styling but the text size is exactly half of what it should be.
I'm using the most recent version of CS6.
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
I'm a creating a Right Click Menu on VBA Form to copy and paste text in Textboxes. I have got the code to work on one textboxt named "TextCat" in the Mouse up event. I would like to be able to use the same code on all textboxes (some in frames) on a form without having to duplicate this long bit of code and change the textbox name multiple times for every different textbox mouse up event. .
Here is the code for a textbox "TextCAt" mouseup
Private Sub TextCAt_MouseUp(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)'----------------------------------------------------------------------------------------------------'Right Click MenuDim Pt As POINTAPIDim ret As Long If Button = 2 Then hMenu = CreatePopupMenu() AppendMenu hMenu, MF_STRING, 1, "Cut" AppendMenu hMenu, MF_SEPARATOR, 3, ByVal 0& AppendMenu hMenu, MF_STRING, 2, "Copy"
[code].......
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
I am in the course of evaluating Xara, and it has a lot of good things going for it compared to Adobe, particularly in combining many of the features of ID and AI. The graduated color screening on objects is way better than AI.
However, I cannot find how to copy an object or text block and paste multiples at specific intervals. Both Pagemaker and InDesign have this feature, so I can't believe Xara overlooked it, as it is particularly useful when laying out say business cards 12 up on a sheet for printing. Yes, I have done a search on this forum and also studied Xara help files.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedIf it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
I have autocad lt 2009, previously when I wanted to trace a drawing I would go to paint, copy the drawing and then paste it in autocad on one layer and do the drawing on another layer worked great, But now when I do the same process it doesn't work.....previously I could draw on the image, could edit the lines, copy, erase, move etc. But now when do this if I have to copy a line I select copy and when I click on the line I want to copy the jpg drawing goes away, or if I try to erase a line the drawing will get deleted, Do I need to uninstall autocad and reinstall?
View 5 Replies View RelatedI have two layered PSD files the same pixel size.
How can I drag and drop or copy and paste one layer from one doc to another but keep its original location on the "art board"? (X and Y coordinates).
I am running Windows Vista Home Premium 64-bit. I am having trouble copying and pasting things. The issue is that after I copy something/Print Screen, it takes several pastes for Photoshop to finally realize the change. Basically, the first couple of times I paste, the thing that was previously copied gets pasted it. I don't know if it's making a difference but it switches the paste to the latest thing that was copied faster after I minimize and maximize back the program. It's extremely annoying especially because then I have to either undo each time/delete the layers. Plus, I do a lot of frame comparisons between different video sources and it's hard to tell whether the thing being pasted was changed or not.
View 1 Replies View RelatedHow do I do a simple copy of one pixel and paste it to another place (I have zoomed in a lot) or if I have't zoomed in that close, copy some area and paste it to another place?
View 4 Replies View Relatedwhen I copy and paste sometimes the paste is put exactly where I copy from and sometimes PSCS2 (not got CS3 yet) pastes where ever it likes?
View 8 Replies View Relatedhow I can simply copy and paste an area of an image back onto the same image?
On my previous graphics software it was simply a case of highlighting the required area, click 'copy' then click 'paste' and bingo! To copy and paste on Photoshop seems much more involved including a number of complicated steps.
When i copy or copy merged and paste into a new canvas or layer, i get like a small Gradient round the sides of the image, the Gradient goes white. I know its a Copy problem because if i paste the layer selection into MS Paint it still gets that gradient around the sides.
View 2 Replies View Related