Copy and paste error — Text pastes at half-size.
Â
When I copy and paste text already in my photoshop document, the text retains the styling but the text size is exactly half of what it should be.
Â
I'm using the most recent version of CS6.
I've been working on a project, and I created all the elements separately in JPG, gif, etc...
However, when pasting them in the final document, they look even smaller, but they should be only half the size.
When I cut, and copy an image to the clipboard and then paste the image into a new, blank page, it pastes the image multiple times (about 20) on the one page. How can I revert to it pasting just one image?
View 1 Replies View Relatedsize changing when I copy and paste a layer from one file to the next. I will use a hypothetical for an example but the concept and process has been confusing me on many projects.
•Ok I have a new document blank page 5’’x5’’.
•I would like to put a circle on there covering approximately 1/4.
•I open up another file 2.5’’x.2.5’’. Place my circle on there going almost all the way to the edges. (lets pretend the circle is detailed and I do not want to resize it again)
•I copy my circle, go over to the 5’’x5’’ image and paste. The pasted layer is always much larger then what it started. Not a 2.5’’ circle.
I know about smart images and how to resize without distortion. My problem always occurs when I copy and paste. Well not problem but operator error.
I'm sick en tired of copy pasting text and get another output of my font size. For example: I copy a text with a font sz of 16 px, that size become 15.98px.
Â
What's the problem with Photoshop CS6? I only have this problem since i've updated my software.
I do a 8.5 x 11 reso around 75 or up to 150. I lasso out something and paste it to my doc and sometimes it is tiny. Is that because my reso is to high?
View 1 Replies View RelatedI have 2006 AutoCAD LT and have been trying to copy and paste something from one drawing to another and
ARX ERROR: eDuplicateKey
keeps popping up!
I have a question, quite a tricky one. Is there any way how can I copy and paste position and size of two objects?
Â
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
Â
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Â
Something like copy + paste in place with a different logics. I hope You understand what I want.
Â
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
 I am using Visual Studio 2010 and AutoCAD 2012 64bit on a Windows 7 64 bit machine 8GB of ram. I am trying to copy a user selection and then paste the selection in another drawing or the same drawing based upon buttons on my form.  The user will specify a base point and then select all of the objects to copy.  I store the objects in a selection set so that the user could paste the selection multiple times into various drawings.  The copy works correctly and I get a selection set from which I obtain the object Ids along with a point to transform my objects.  My problem occurs during my paste routine. The Deep Clone Objects or WblockCloneObjects seems to be working correctly and then I get into my code to transform the entities. I'm also storing some information about the blocks so that I can manipulate our proprietary database later via another function call.  It seems like everything works correctly, but when I select a large number of objects I receive a fatal error. FATAL ERROR: Unhandled Access Violation Reading oxffbc4008 Exception at ed010939h.  It seems that the number of objects that people can copy varies on each user's computer.
View 2 Replies View RelatedI am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe by phone and chat. I am on a new iMac and have no third party plug-ins installed.
View 3 Replies View Relatedhow can I copy and paste position and size of two objects?
Â
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
Â
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Â
Something like copy + paste in place with a different logics. I hope You understand what I want.
Â
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
Is there a way to copy/paste text in Photoshop without keeping formatting (font, size, color, etc)?
View 4 Replies View RelatedWhen I copied text over from Photoshop to illustrator it kept the text formatting. For example the font, font size, color. Now when I use CC and copy paste text from PS to AI, all text formatting is lost and everything is placed as whatever the current AI text setting is.
Â
HOWEVER, pasting from AI to PS WORKS as it should. All font/text formatting is maintained. Is this a bug or is there a setting for this that I just never knew about?
I have not got the hang of layers but i need to copy text/letters from a scanned page
How do i do i copy and paste text from one jpg to create another. I have tried Ctl + c to copy but when i click the other layer to then Ctrl + A and then CTRL + P to paste like a youtbe video suggests, instead of the copied text being pasted on i get a dialogue window for the printer.
Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
Why does Revit not allow the copy and pasting of text from, for example, the Formula box in a Family Types Dialog? There are other instances when this also manifests itself but I'm struggling with formulas currently and need to get on.
View 1 Replies View RelatedIllustrator CS5.5 on Mac: When I copy text from one Illustrator document and paste it in a different document, the text canges to Myriad (the deafult font). Is there a setting somewhere to preserve the formatting? Even pasting into an existing text style still changes the font.
View 39 Replies View RelatedAny way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
How can I copy and paste text into a title frame? I have been unable to do anything but add the text manually every time.
View 4 Replies View Relatedi have a 2 artistic text blocks (both with different fonts) in same corel document and when i ctrl+c/ctrl+v from one to other it copy/paste not only the text but also font type/size and color.
I want just the text copied not all the properties.
I want to copy a value/text in cells from excel and paste it in specific mtxt that has been made in existing .DWG file.
I have done it by copy and paste, but it doesn't work effectively since there's too many cells to be pasted.
One of my cells entry which should be copy is in D5 and the coordinate of mtxt in autocad is (17,46 15,03 0,000) both of those file is located in same folder
For some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
I am using AutoCad 2014
I want to paste text (numbers) into the command line as I am drawing a line.
In AutoCad 2011/2012 if I paste (CTRL+V), then the numbers in the clipboard will be pasted into the command line and all I have to do is push enter.
In AutoCad 2014 if I paste (CTRL+V), AutoCad will paste the clipboard contents as an mtext object into the drawing.
How do I change the behavior of AutoCad so that I can use "CTRL+V" in the command line?
For clarification these are the exact steps I am trying to do:
1. {type L}
2. {click a point in the drawing}
3. {type CTRL+V} // paste a number as a distance into command line
4. {type ENTER} Â
I know I Â can right click the command line and select paste. This option is unnacceptable for my use. I want to be able to CTRL+V text into the command line.
When I copyclip a dimension from one drawing with UCS set to world/north, then paste into another drawing with UCS rotated in Z (south for example), the text remains oriented to north. The original drawing doesn't have to be set to world, just something different from the paste orientation.
Is there a way to have the text orient itself to the current UCS at paste?
We are having problems with text in Illustrator CS6.
1. When we copy / paste text within illustrator all color information is lost.
2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different random colors!!
For example: If we save an Illustrator document with a paragraph of text that is part red and part black when we re-open the same paragraph might be all gray, or orange or (you pick a color).
Mac OSX 10.8.2
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing  text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from  the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
I'm a creating a Right Click Menu on VBA Form to copy and paste text in Textboxes. I have got the code to work on one textboxt named "TextCat" in the Mouse up event. I would like to be able to use the same code on all textboxes (some in frames) on a form without having to duplicate this long bit of code and change the textbox name multiple times for every different textbox mouse up event. .
Here is the code for a textbox "TextCAt" mouseup
Â
Private Sub TextCAt_MouseUp(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)'----------------------------------------------------------------------------------------------------'Right Click MenuDim Pt As POINTAPIDim ret As Long If Button = 2 Then hMenu = CreatePopupMenu() AppendMenu hMenu, MF_STRING, 1, "Cut" AppendMenu hMenu, MF_SEPARATOR, 3, ByVal 0& AppendMenu hMenu, MF_STRING, 2, "Copy"
[code].......
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
I am in the course of evaluating Xara, and it has a lot of good things going for it compared to Adobe, particularly in combining many of the features of ID and AI. The graduated color screening on objects is way better than AI.
However, I cannot find how to copy an object or text block and paste multiples at specific intervals. Both Pagemaker and InDesign have this feature, so I can't believe Xara overlooked it, as it is particularly useful when laying out say business cards 12 up on a sheet for printing. Yes, I have done a search on this forum and also studied Xara help files.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedOur supplier sent us some wierd size pdfs that are not full size or half size. I am trying to resize them to full size pdfs (Arch D) but am unable to figure this out in Acrobat.
My work-around is to insert them in AutoCAD and scale them based on known dimensions, then print to pdf. Unfortunately the resulting file is collosal and the quality degraded.