AutoCad :: Publishing Drawings To DWF - Hidden Lines Appearing As Dashed / Solids
Apr 28, 2011
A coworker is trying to publish a bunch of drawings to dwf and is having problems with the linetypes. Essentially, after publishing, the hidden lines are showing up dashed in some drawings and solid in others. We've tried setting the ltscale to 1 and the psltscale to 0. We are using AutoCAD 2007. Additionally, when we look at one tab in paperspace, the lines look correct, on another, the dashes look smaller. I'm at a loss as to what to do.
View 3 Replies
ADVERTISEMENT
Nov 23, 2012
I have an assembly with some hidden solids in which are turned to invisible in both part and assembly but they show on the drawing.
how to not show these in the drawing but still show the unhidden soild.
View 2 Replies
View Related
Mar 24, 2011
I guess the title pretty much says it all Dashed lines in my drawing turn solid when i switch to the layout area, and when i try to plot. I've tried fiddling with line type scale, but it hasn't solved the problem. I've attached one of the drawings i'm having trouble with.
I think i might have figured it out, when i set lts to 0.05 the show up fine in the layout area, but in the drawing are it looks like the line type scale is way too low. why the dashed lines don't show up the same in the drawing and layout areas?
View 2 Replies
View Related
Jun 28, 2012
I need to have hidden lines on a 3D object dashed. So basically I need all the lines but those lines that are at the back of a cube(wich are normaly hidden), they need to be dashed. See the attachment
View 9 Replies
View Related
Dec 19, 2012
I have a linetype that is a drain line so it's dashed and has a "D" within it along with an arrow pointing in the direction of flow. The drawing I have contains many of these lines ehich display properly in the viewport meaning you can see the dashes, D's and arrows.
Problem is, I got an as-built from a contractor as pasted it into my drawing. His lines look fine in my model space, but in my viewport the lines appear solid and you don't see the dashes, D's or arrows. I tried MATCHPROP to make the contractors lines match my existing lines but that did not work. I tried andjusting the linetype scale but that doesn't work either.
View 4 Replies
View Related
Oct 9, 2013
I saw some years ago a 3D drawing where hidden lines were dashed after hide command. I tried to find out, how it was made, but nothing. Today I need this solution, but I can't find information, how is it possible.
View 2 Replies
View Related
Mar 14, 2013
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 7 Replies
View Related
Nov 23, 2012
I have an assembly with some hidden solids of a part in, which are turned to invisible in the part but they show on the drawing. How to not show these in the drawing but still show the unhidden solid of the part.
View 2 Replies
View Related
Mar 27, 2013
In the attached drawing you'll see I am trying to print a wireframe view of a 3D object with hidden lines displayed as dashed...in paperspace with an MVIEW viewport. To achieve this, I created a custom visual style called "3D Wireframe with hidden lines" because AutoCAD Mechanical doesn't come with a view preset that will do that for some reason. Even though the viewport looks perfect in paperspace, and is set to print "as displayed", the drawing prints (and previews) with the dashed line as solid instead.
I know I could use VIEWBASE to create a drawing view with hidden lines set to "visible and hidden", but that doesn't mean I don't want to know why AutoCAD is doing this strange behavior with standard viewports.
View 2 Replies
View Related
Aug 3, 2011
I'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
View 0 Replies
View Related
Nov 8, 2011
I have a client who is requesting that I send them ".dwg" files of a particular project. They are asking for both 3D solids AND 2D drawing files.
1.) I can export the assembly files to a 3D DWG easy enough but how do I do it for 83 files using task scheduler or something; I cannot figure it out?
2.) We have used ".dwg" as our native drawing format because we have people here who have a need to open our IV drawings using AutoCAD. Can I just send my client these files, without the supporting part files, and have them open them?
3.) If I just send them a copy of our native ".dwg" files are they going to be able to re-use that geometry somehow? There isn't a real IP concern as these are just pipe supports and platforms made from available steel shapes but I certainly wouldn't want them to be able to take our work and re-use it on a different project without us. If they have to do some crazy stuff like explode and scale and re-dimension these things in order for them to be re-usable on a different project, I would at least prefer that to them just being able to reuse them easily. I guess what I'm saying is that if they are going to re-use this content, I am not going to make it easy for them that's for sure!
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 3 Replies
View Related
Jan 28, 2013
I've started having a problem with the Publish command when publishing multiple drawings to PDF.
When I plot a drawing using the plot command, I don't have a problem.
When I publish one drawing using the Publish command it is also fine.
It is only when I try to publish multiple files that the problem occurs- the PDFs are produced, but the it is as if the drawing contents (paper space) has been shifted up by 10mm or so, cutting off the top of the drawing, and creating a larger margin at the bottom of the drawing. I use exactly the same page setup as for the single drawing plot.
There seems to be no setting that would change this, and the fact that publishing a single drawing works suggests that there is some kind of bug. At the moment i have to plot every drawing individually (or get my colleague to do it- it works fine on his machine, same page setup file!)
See attached example.
View 8 Replies
View Related
Oct 4, 2011
I've got a persisitant problem with the publishing feature in autocad. I know how to set up bulk print of drawings using publish.
However the drawings are a mixed lot (some in paper some in layout). Is there a way to determine the state of the drawing without opening each one. In my case there is thousands of drawings and of course i do not have the manpower to inspect each one.
View 5 Replies
View Related
Jul 22, 2010
I need to transform a lot of dashed (single) lines into separate lines... Who can tell me how to do this in a few clicks. I don't need an outline of the dashed line. So the black dashes I need, the white in between the dashes I want to loose.
See the example. I need the second lines.
View 8 Replies
View Related
Sep 7, 2013
I must be missing something fundamental when trying to change a line from a solid line to a hidden or dashed line in Autocad 2000. I use the ltype command then load either Hidden, or dashed ISO,or both, and invariably the scale is way off in that I always end up with a still solid line, after using modify properties. After all that, every line I draw after that comes out dashed. Maybe I should fool with the layers? Is there a basic procedure I should follow here?
View 2 Replies
View Related
Oct 11, 2012
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies
View Related
Apr 10, 2012
We use a specific program for our line of work (KCL) in which the blocks of equipment we bring into autocad dashed lines only show up with an LTS scale of 10. By doing this I can never get our regular dashed or hidden lines to show up at that scale so I have to adjust the properties of each line to .025 or something like that for it to read. Is there something globally to change to make this work better?
Also, does PSLTSCALE have anything to do with it? What should this be set to?
View 2 Replies
View Related
Nov 11, 2011
Why I can't see my dashed lines in my layout tab? They are drawn in my model space, but just can't see them when i get ready to plot.
View 7 Replies
View Related
Oct 5, 2012
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
View 8 Replies
View Related
Mar 22, 2011
I've been customizing acad.lin like a maniac for the last couple of days and there's a recurring problem that I can't resolve by myself.I have this line...
*EX-DASH,[G] Existing - - EX - - - - EX - - - - EX - -
A,.125,-.0625,0.127,-.254,["EX",STANDARD,S=.127,U=0,X=-.127,Y=-.0635],-.2,.125,-.0625,.125,-.0625
The result is similar to...
- - EX - - - - EX - - - - EX - - - - EX - - - - EX - - - - EX - -
Let's say that the pattern of the line ("- - EX - -", because that's the part that's being repeated) takes 50 units to display at a given scale. I draw a PLINE and one section of the line is like 75 units long. If the line I'm drawing can't contain the pattern of my custom line, it won't display correctly. Given these numbers, the pattern would only display right once (75 / 50 = 1.5).
I get that and it's ok. HOWEVER, one thing I don't get is why autocad displays the pattern once and then fill the rest with a continuous line. It's okay for all my continuous custom lines with text because it keeps the same base line and it feels transparent (and it's also the reason I never realized it was reacting this way until I started working with dashed lines).
Example: I want to display "- - EX - - - - EX - -" but would only have space for "- - EX - - - - E". Acad will display "- - EX - -" once + continuous line for the remaining space.
I know that if there's no space to fit a second "EX" it can't be displayed, and that's all right, but how come it doesn't fill the rest of my line with dashes instead of a continuous line? With PLINEs, every time I turn a corner, I get this continuous line segment on each corner before it starts displaying the dashes (because I can't always draw lines that fits perfectly the pattern).
How to force it to display dashes when there's not enough space to repeat the pattern one last time?
View 2 Replies
View Related
Jan 3, 2014
I have some text in vanilla Autocad 2014 that is showing up as dashed lines
View 9 Replies
View Related
Feb 13, 2013
I am trying to plot a drawing, Visual style: wireframe, occluded edges: dashed. The drawing has millimeters as the unit of measurement. I have tried this (taken from a website some of you might be familiar with):
[URL]
but it does not work. I set the ltscale as low as 0.01 but without result. I tried printing from "model" and "Layout" (everything is set at Wireframe and dashed occluded edges).
I have finished the drawings and documentation and this is holding me back from printing and sending what I have done.
View 9 Replies
View Related
Jul 14, 2011
I have two drawings, both in unit: meters, UCS world (however I think that doesn't matter). How come that a hatch with same scale appears denser in one drawing than the other?
View 8 Replies
View Related
May 2, 2012
I'm new to AutoCAD and I'm having trouble in one of my designs. I've attached the photo so you can see it. The problem is, I need the line that currently defines the left edge of my curve to follow the curve of the cylinder. I want it to be flush with the surface so that the line becomes a twist.
View 1 Replies
View Related
Jun 28, 2013
I have just added all my attributes to the main template, but the default for the attributes is four dashed lines ----
so if the attribute has data it puts it in, but if it does not it just uses these dashed lines and I cannot seem to remove them. I don't want to make them invisible and don't particularly want to have to use code, but I have never come across this before .
I have attached a screenshot.
View 9 Replies
View Related
May 1, 2009
dashed lines are showing as continuous in both model and paperspace the property tab shows the linetype as by layer when i click on the line and under the layers proper manager the linetype for the layer says dashed
View 9 Replies
View Related
Mar 23, 2011
I have a map which I devided to
3 layouts (scale 1:1 = 1)
+
1 layout where general map is shown (scale is 1:5 = 0.2)
On scale 1:1 I want line to be shown as dashed (same as in Model). But in scale 1:5 I want line to be shown as continuous.
how can I show dashed line as continuous in single layout. Which settings for layout must be changed?
View 7 Replies
View Related
May 11, 2012
I am having problem with drawing dotted lines. I know how to draw them but the spacing between them is way too wide.
Please refer to the attachment for more information.
How do I get them to be more narrower? SOLA4012 Pluto205.dwg is my .DWG file.
Capture.PNG
I am unsure if this is unit related. However, I have changed to "mm" setting. Yet, when drawing 1.000 unit of line it seems to be be 1 inch!?
View 3 Replies
View Related
Oct 23, 2013
I have have small gray shaded boxes showing up on drawings plotted in Civil 3D, they are never anywhere I can see in the drawing and they never show up in the print preview. I have tried using multiple printers and still get the same thing. I think it may have something to do with viewports as they only show up inside a viewport window when plotting from paperspace and don't show up when I plot from modelspace.
View 9 Replies
View Related
Dec 10, 2013
I wanted to know why is it that everytime i create a layout as a pdf on a4 the dashed lines ( non printable area) size is different?
View 3 Replies
View Related
Aug 20, 2012
I am having trouble presenting segmented lines with a dashed line type in AutoCadMap 3D 2011. When the segments are small (as in curves) the dashes float together and the lines appear to be continous. This is not the case in for example TopoCad and ArcGIS.
Is there some kind of system setting in AutoCad where you can chose drawing technique? So that the dashed line segment starts with the blank part instead of the dashed?
View 2 Replies
View Related
