I need to transform a lot of dashed (single) lines into separate lines... Who can tell me how to do this in a few clicks. I don't need an outline of the dashed line. So the black dashes I need, the white in between the dashes I want to loose.
See the example. I need the second lines.
I have exported a dashed line from some CAD software (KASEMAKE) as a PDF. When viewed in acrobat and zoomed in, you can clearly see the dashes. When opening in Illustrator it comes in as one solid line. Corel Draw opens it correctly too. I cannot find any import settings for bringing in a PDF in Illustrator. I have uploaded the PDF file to a dropbox so that people can see it. [URL].
View 3 Replies View RelatedWhen I define a dashed line, then go back to edit a new dash, the dash/gap settings must first be deleted. Is there a simple way to delete these numbers without selecting and deleting each one? I happen to be using CS5 but this feature has not changed since AI was introduce, if I can remember right.
I know I should save multiple dash "styles", but even stroke profiles are saved for quick reuse. Why not dashed lines?
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
View 6 Replies View RelatedIt's me again w/the same tut at: [URL]
Where I am confused is that once the line is drawn from top to bottom and I go to draw the line across the upper area the anchors stay connected.
I tried the Alt key + click to cut the path but (as you advanced folk probably already know) it didn't work.
way to make the bottom Anchor an end Anchor? Does that even exist?
Honestly I am not even sure what I ought to be looking for in the manual etc.
I tried just drawing the shape for the Glossy effect and then filling it with the required gradient but frankly it just looks odd ... it looks flat and basically UGLY
The blue line that goes across is the problem for me.
I should also mention, if you go to the tutorial ... it says that I am suppose to Duplicate the Inner Circle but I made too many goofs and somehow all my layers ended up on one layer so rather than doing what the tut instructs I just made a New Layer and then drew a new circle with the Ellipse tool.
Even so, I actually couldn't grasp why or how I was suppose to go about intergrating the new circle with using the Pen Tool to draw the Glossy effect object. So, I skipped that part and just used the Pen tool to draw the needed shape as shown above in pink.
I would like to place a small square in front of multiple lines of text. I want to use it like a square that would be used as a checklist.
1. Where I can find a square in the Glyphs panel?'
2. If I create a square shape, and want to place it front of each line of text layed out in a text box, what is the best way to line the square on each line with each line of text?
How do you draw dashed lines with the line tool?
View 7 Replies View Relatedhaven't found a good dashed line tutorial. I don't want the one using brushes where the result is dots. I want dashes.
I want to be able to put them horizontally and vertically around a block of text.
In the sample file, RAC Advanced Sample File, there is an entry canopy. It is constructed as a generic roof placed on level 2.
I noticed that on the first floor plan, this roof slab shows as dashed lines. How is this done? I tried copying/duplicating this roof, but dashed lines do not show.
What is the best way to get overhead information, like dashed lines for headers or doorless openings to show up in plan?
View 1 Replies View RelatedWe use a specific program for our line of work (KCL) in which the blocks of equipment we bring into autocad dashed lines only show up with an LTS scale of 10. By doing this I can never get our regular dashed or hidden lines to show up at that scale so I have to adjust the properties of each line to .025 or something like that for it to read. Is there something globally to change to make this work better?
Also, does PSLTSCALE have anything to do with it? What should this be set to?
Why I can't see my dashed lines in my layout tab? They are drawn in my model space, but just can't see them when i get ready to plot.
View 7 Replies View Relatedwhen I apply a clipping mask - the picture gets a dashed line border that remains even when the image is saved as JPEG. Is there a way to get rid of the dashed line border?
View 3 Replies View RelatedWhen I join 2 lines that are dashed (or dotted, I don't know which is the correct name) there's no "corner". See picture below. In one of the corners the lines doesn't meet. In the other there's a "cut-out".
View 14 Replies View RelatedCan I make a dashed line using the line tool? if not, does Photoshop allow one to make/get a dashed line?
View 8 Replies View RelatedI need to have hidden lines on a 3D object dashed. So basically I need all the lines but those lines that are at the back of a cube(wich are normaly hidden), they need to be dashed. See the attachment
View 9 Replies View RelatedI've been customizing acad.lin like a maniac for the last couple of days and there's a recurring problem that I can't resolve by myself.I have this line...
*EX-DASH,[G] Existing - - EX - - - - EX - - - - EX - -
A,.125,-.0625,0.127,-.254,["EX",STANDARD,S=.127,U=0,X=-.127,Y=-.0635],-.2,.125,-.0625,.125,-.0625
The result is similar to...
- - EX - - - - EX - - - - EX - - - - EX - - - - EX - - - - EX - -
Let's say that the pattern of the line ("- - EX - -", because that's the part that's being repeated) takes 50 units to display at a given scale. I draw a PLINE and one section of the line is like 75 units long. If the line I'm drawing can't contain the pattern of my custom line, it won't display correctly. Given these numbers, the pattern would only display right once (75 / 50 = 1.5).
I get that and it's ok. HOWEVER, one thing I don't get is why autocad displays the pattern once and then fill the rest with a continuous line. It's okay for all my continuous custom lines with text because it keeps the same base line and it feels transparent (and it's also the reason I never realized it was reacting this way until I started working with dashed lines).
Example: I want to display "- - EX - - - - EX - -" but would only have space for "- - EX - - - - E". Acad will display "- - EX - -" once + continuous line for the remaining space.
I know that if there's no space to fit a second "EX" it can't be displayed, and that's all right, but how come it doesn't fill the rest of my line with dashes instead of a continuous line? With PLINEs, every time I turn a corner, I get this continuous line segment on each corner before it starts displaying the dashes (because I can't always draw lines that fits perfectly the pattern).
How to force it to display dashes when there's not enough space to repeat the pattern one last time?
I have some text in vanilla Autocad 2014 that is showing up as dashed lines
View 9 Replies View RelatedI am trying to plot a drawing, Visual style: wireframe, occluded edges: dashed. The drawing has millimeters as the unit of measurement. I have tried this (taken from a website some of you might be familiar with):
[URL]
but it does not work. I set the ltscale as low as 0.01 but without result. I tried printing from "model" and "Layout" (everything is set at Wireframe and dashed occluded edges).
I have finished the drawings and documentation and this is holding me back from printing and sending what I have done.
I have just added all my attributes to the main template, but the default for the attributes is four dashed lines ----
so if the attribute has data it puts it in, but if it does not it just uses these dashed lines and I cannot seem to remove them. I don't want to make them invisible and don't particularly want to have to use code, but I have never come across this before .
I have attached a screenshot.
dashed lines are showing as continuous in both model and paperspace the property tab shows the linetype as by layer when i click on the line and under the layers proper manager the linetype for the layer says dashed
View 9 Replies View RelatedThe attachment below shows some of our thicker linestyles that we need for our life safety plans in the form of detail lines. In ACAD we could produce "squared" corners in stead of this spraypaint look.
Is there a way to get what we want in Revit or do we just need to accept yet another limitation of this program?
I have a map which I devided to
3 layouts (scale 1:1 = 1)
+
1 layout where general map is shown (scale is 1:5 = 0.2)
On scale 1:1 I want line to be shown as dashed (same as in Model). But in scale 1:5 I want line to be shown as continuous.
how can I show dashed line as continuous in single layout. Which settings for layout must be changed?
I am having problem with drawing dotted lines. I know how to draw them but the spacing between them is way too wide.
Please refer to the attachment for more information.
How do I get them to be more narrower? SOLA4012 Pluto205.dwg is my .DWG file.
Capture.PNG
I am unsure if this is unit related. However, I have changed to "mm" setting. Yet, when drawing 1.000 unit of line it seems to be be 1 inch!?
I have a linetype that is a drain line so it's dashed and has a "D" within it along with an arrow pointing in the direction of flow. The drawing I have contains many of these lines ehich display properly in the viewport meaning you can see the dashes, D's and arrows.
Problem is, I got an as-built from a contractor as pasted it into my drawing. His lines look fine in my model space, but in my viewport the lines appear solid and you don't see the dashes, D's or arrows. I tried MATCHPROP to make the contractors lines match my existing lines but that did not work. I tried andjusting the linetype scale but that doesn't work either.
I wanted to know why is it that everytime i create a layout as a pdf on a4 the dashed lines ( non printable area) size is different?
View 3 Replies View RelatedI am having trouble presenting segmented lines with a dashed line type in AutoCadMap 3D 2011. When the segments are small (as in curves) the dashes float together and the lines appear to be continous. This is not the case in for example TopoCad and ArcGIS.
Is there some kind of system setting in AutoCad where you can chose drawing technique? So that the dashed line segment starts with the blank part instead of the dashed?
I saw some years ago a 3D drawing where hidden lines were dashed after hide command. I tried to find out, how it was made, but nothing. Today I need this solution, but I can't find information, how is it possible.
View 2 Replies View RelatedI guess the title pretty much says it all Dashed lines in my drawing turn solid when i switch to the layout area, and when i try to plot. I've tried fiddling with line type scale, but it hasn't solved the problem. I've attached one of the drawings i'm having trouble with.
I think i might have figured it out, when i set lts to 0.05 the show up fine in the layout area, but in the drawing are it looks like the line type scale is way too low. why the dashed lines don't show up the same in the drawing and layout areas?
A coworker is trying to publish a bunch of drawings to dwf and is having problems with the linetypes. Essentially, after publishing, the hidden lines are showing up dashed in some drawings and solid in others. We've tried setting the ltscale to 1 and the psltscale to 0. We are using AutoCAD 2007. Additionally, when we look at one tab in paperspace, the lines look correct, on another, the dashes look smaller. I'm at a loss as to what to do.
View 3 Replies View RelatedI have drawn a site plan in model space at 1to1 scale. I try to draw hidden lines to show demolition. In paper space the scale is set to 1"=50" to fit on paper. But all the hidden lines plot solid. I had changed LTSCALE, PSLTSCALE, to 1. This problem keeps happening in most every thing I draw.
View 8 Replies View Related