I have an assembly with some hidden solids in which are turned to invisible in both part and assembly but they show on the drawing.
how to not show these in the drawing but still show the unhidden soild.
A coworker is trying to publish a bunch of drawings to dwf and is having problems with the linetypes. Essentially, after publishing, the hidden lines are showing up dashed in some drawings and solid in others. We've tried setting the ltscale to 1 and the psltscale to 0. We are using AutoCAD 2007. Additionally, when we look at one tab in paperspace, the lines look correct, on another, the dashes look smaller. I'm at a loss as to what to do.
View 3 Replies View RelatedI have an assembly with some hidden solids of a part in, which are turned to invisible in the part but they show on the drawing. How to not show these in the drawing but still show the unhidden solid of the part.
View 2 Replies View RelatedIn 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
I have a client who is requesting that I send them ".dwg" files of a particular project. They are asking for both 3D solids AND 2D drawing files.
1.) I can export the assembly files to a 3D DWG easy enough but how do I do it for 83 files using task scheduler or something; I cannot figure it out?
2.) We have used ".dwg" as our native drawing format because we have people here who have a need to open our IV drawings using AutoCAD. Can I just send my client these files, without the supporting part files, and have them open them?
3.) If I just send them a copy of our native ".dwg" files are they going to be able to re-use that geometry somehow? There isn't a real IP concern as these are just pipe supports and platforms made from available steel shapes but I certainly wouldn't want them to be able to take our work and re-use it on a different project without us. If they have to do some crazy stuff like explode and scale and re-dimension these things in order for them to be re-usable on a different project, I would at least prefer that to them just being able to reuse them easily. I guess what I'm saying is that if they are going to re-use this content, I am not going to make it easy for them that's for sure!
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I'm using 2D wireframe as my default view while extruding some solid pipes. Everything appears to work fine, but when I switch to any other shademode eg. 3D wireframe, some of the pipes disappear. In Navisworks they show up as listed objects in the selection tree but cannot be displayed and more imporantly do not get considered in clash detection.
I can't see anything different about the properties of the "hidden" pipes over any others that can be seen.
If I slice the "hidden" solids, then one half or both halves become visible like a normal solid again.
I have hundreds of pipes to model and clash so need to resolve what's happening here. Attached is a small sample file.
Is there a way in Autocad to create a solid that moves, for instance I have a piece of equipment on a hinge and i wanted to show how the equipment looks in use and then how the equipment looks once it moves on the hinge.
View 1 Replies View RelatedI have this 3D refrigerator block from GE and I want to extract 2d front, plan, sides. I tried flatshot and all the sol's solprof, soldraw, solview and I get a message saying there are no solids or surfaces to extract.
View 2 Replies View RelatedI have noticed that "Data Extraction" does not give you geometry information of a 3D solid such as position X, Y, and Z, and Length, Width, and Height. This information IS available in "Properties". Is there a way to extract this info to csv or some other format?
View 6 Replies View RelatedI am beginner at 3D modeling, I have to solids and trying to subtract them. I have done it many time on this particular drawing but for some reason it is not working now. Here is my command prompt
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Dimension disassociated.
Here is an image of what I need to subtract. Why is it not working?
Is there a way to add "Round or Fillets to solids"?
View 2 Replies View Relatedhow I can Identify invalid solids without having to select each solid individually.I would think that a lisp routine would be the way to go, but I cannot find what makes a solid invalid as opposed to being valid.
View 3 Replies View RelatedCan I get AutoCAD to show hidden lines from a 3d drawing created in AutoCAD 2012?
View 2 Replies View RelatedI used these commands years ago and cant remember what they are. I am designing furniture in 3D and want to view the object at SE Isometric, then rotate an additional 18 degrees, then take a screenshot that will basically give me a block that is a line drawing of the object with lines hidden. This is a question with two parts:
#1: How do I rotate from SE Isometric 18 degrees to get the view angle I want?
#2: How do I take a screenshot of the object that will produce a block with hidden lines?
There are two seperate commands for each of these, I just can't remember what they are.
Attached is a picture of the final product I'm looking for.
I have a drawing & when I pan I can see a lot of extra information hidden by wipeouts.
Any easy way to erase all of that & leave what I can see, without panning, intact?
When I try to copyclip what I can see it grabs everything including the hidden objects.
Unfortunately whoever did the drawing didn't put all the hidden info on one layer.
How does one prevent copies/other instances of same block from being hidden when REFEDITing block?
View 1 Replies View RelatedWe have been trying to plot some 3D objects in our drawing with a hidden line. We need the drawing to not show the hidden 3D lines but to show the edge lines of the object to plot as a hidden line.
View 2 Replies View RelatedThe “annotation visibility” is turned on, nevertheless, some objects (texts) are hidden!
I’m not sure why some annotative objects (texts) are turned off knowing that the
All layers are turned on;The “annotation visibility” is turned on.
Screenshot below and the attached file.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
In my model i need to display in 3D. When i change the visual style from 2D Wireframe to 3D Hidden nothing is changing.
Its not a problem with the software as if i draw a cube in the model this changes but my model still does not.
Also the model is imported from Tekla Structures in the same way as the 20 a week and this is the only one which i have had problems with.
I have a series of drawings and am unable to make some block text for risers not appear hidden.If I paste the block into another drawing I get the text to appear but then when I try to bring back into this drawing it becomes hidden.
View 5 Replies View RelatedI'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
I'm using Cad 2011,how do u generate 2D drawings from a 3D object,i know that the command only works on layout n on 2013 the command is "Base".So wat is it on 2011?
View 4 Replies View RelatedI am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies View RelatedI need to have two people working in the same dwg, basically at the same time. We call it an Assembly Plan. Everything is done in model space. I want to be able to have each of them basically work in the same dwg and at the end of the day, BOTH of their work is saved in one dwg, but no double lines, etc.
View 2 Replies View RelatedWhat is the best way to get 2D drawings from a 3D model? Flatshot will give a flat view but it does everything in the entire drawing and brings every line with it.
Is there an easy way to get a 2d drawing from one thing in a 3D model? We only have Autocad, no extras like Revit.
Where the majority of people annotate their drawings. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like to add annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
I have built a 3D turbine that combined more than 50 3D parts. Now I want an assembly drawings to show our clients how to put those parts together. Any autodesk software? Some people recommended Inventor and I have never used it. Is this a right software to do some kinds like this project?
View 5 Replies View RelatedRecently I started using AutoCAD 2012 and I ran into one problem which I didn't encounter before.
The problem is that when I try to paste objects from another drawing (through clipboard - usually another instance of AutoCAD) I can't paste them in some drawings only.
The following things happen:
-Autocad behaves normally like when I usually paste objects except there is nothing inserted.
-When I save the drawing after unsuccessful insert, even if I canceled inserting, drawing size increases dramatically (for about 2-4MB).
-If I open new drawing, I can insert objects there.
-Also when I copy to clipboard, autocad takes a lot of time even if it is only few lines.
I tried these thing to fix issue:
-I checked if there are any layers turned off.
-I tried to copy with COPYBASE
-I restarted autocad (sometimes it works but only for some moments or for one insert).
-I did PURGE and AUDIT
-I tried to copy paste in same instance of AutoCAD but that didn't work.
I'm usually using t least 2 instances of AutoCAD (I hope that is not the problem).
I am doing electrical drawings with the architect giving me an exported DWG from Vectorworks. I have XREF the background drawing that when opened is about 6 blocks of the building background and 2 blocks of the electrical devices.
Here is the problem: The architect sent me an updated DWG that only has the electrical updates without any backgrounds. My thought was to purge all and then select all the items and then copy with basepoint. Then open the original architects XREF drawing. Select those two electrical block, erase them (or move them to the size a fixed distance). Then paste as block from the other file. Then move the block to the correct location, explode, done.
Big problem: I just tons of this error in the command line referencing different block group numbers being ignored:
Duplicate definition of block Group-1265-1 ignored.
Then the block that was pasted added a background that wasn't in the old drawing and many of the items in that block was either missing or still had the old symbols. Can't figure out how to update the background with confidence that it is really updated with new information and not keeping old.
If I open a new drawing and paste that block in, everything comes in perfectly