AutoCAD 2010 :: Adding Round Or Fillets To Solids?
Mar 3, 2012Is there a way to add "Round or Fillets to solids"?
View 2 RepliesIs there a way to add "Round or Fillets to solids"?
View 2 RepliesWhen I am adding blends or fillets to a 3D model, sometimes after picking a few edges I will inadvertently select a wrong edge. Can I deselect the edge and resume selecting edges for the fillets or do I have to start over from the beginning?
View 5 Replies View RelatedI'm working on this shape: it has square base, goes to the top round , and round top is shiffted off center.
View 9 Replies View RelatedI'm using AutoCAD 2010 32bit on Windows XP with built-in video - so no hardware rendering, etc. I have a situation where a 3D solid that I have created looses its fillets while creating a PDF.
The solid was built using Union, Subtraction, Slicing and Fillet operations. I have attached the DWG and two PDFs - one with fillets, the other without. Both PDFs were created within moments of each other from the same DWG. Notice in the DWG that the solid model has rounded edges (fillets) along most edges, but they are missing in the bad PDF, and show in the good PDF. I create the PDFs using ACAD's Output | Export PDF feature on a single Layout in Paperspace. When the PDF is generating, for about two seconds you see the solid edges loose their fillets, and then sometimes return to normal, but other times the DWG changes and I have to add the fillets again.
BTW: I tried a fresh OS and ACAD install and problem persists.
PDS 2014/Win8 64/32GB RAM/256GB SSD RAID1/Asus P9X79 Deluxe/i7 3820/nVidia Quadro K2000D/Dual 27" LCD
Is it possible to add text and lines into round parts? Those are for the manufacturer so they can see where exactly all the stuff will be painted on.
View 5 Replies View RelatedI'm using 2D wireframe as my default view while extruding some solid pipes. Everything appears to work fine, but when I switch to any other shademode eg. 3D wireframe, some of the pipes disappear. In Navisworks they show up as listed objects in the selection tree but cannot be displayed and more imporantly do not get considered in clash detection.
I can't see anything different about the properties of the "hidden" pipes over any others that can be seen.
If I slice the "hidden" solids, then one half or both halves become visible like a normal solid again.
I have hundreds of pipes to model and clash so need to resolve what's happening here. Attached is a small sample file.
I have an assembly with some hidden solids in which are turned to invisible in both part and assembly but they show on the drawing.
how to not show these in the drawing but still show the unhidden soild.
Is there a way in Autocad to create a solid that moves, for instance I have a piece of equipment on a hinge and i wanted to show how the equipment looks in use and then how the equipment looks once it moves on the hinge.
View 1 Replies View RelatedI have this 3D refrigerator block from GE and I want to extract 2d front, plan, sides. I tried flatshot and all the sol's solprof, soldraw, solview and I get a message saying there are no solids or surfaces to extract.
View 2 Replies View RelatedI have noticed that "Data Extraction" does not give you geometry information of a 3D solid such as position X, Y, and Z, and Length, Width, and Height. This information IS available in "Properties". Is there a way to extract this info to csv or some other format?
View 6 Replies View RelatedI am beginner at 3D modeling, I have to solids and trying to subtract them. I have done it many time on this particular drawing but for some reason it is not working now. Here is my command prompt
Command: _subtract Select solids, surfaces, and regions to subtract from ..
Select objects: 1 found
Select objects:
Select solids, surfaces, and regions to subtract ..
Select objects: 1 found
Select objects:
Dimension disassociated.
Here is an image of what I need to subtract. Why is it not working?
how I can Identify invalid solids without having to select each solid individually.I would think that a lisp routine would be the way to go, but I cannot find what makes a solid invalid as opposed to being valid.
View 3 Replies View RelatedI am looking for a way to get my dimensions to round up instead of to the nearest.
For example... when I have one line that is 11-15/32" and one that is 11-17/32" and I need them to round up to the nearest 1/4". I want it to round up, showing 11-1/2" and 11-3/4" but instead i get 11-1/2" for both.
Round off of the value (length) of an inserted field, I wanted to make a round off for the field value that represents the length of a line but sounds that there is no option to do so.
For example:
the 2568 will be rounded off to be 2570
the 2563 will be rounded off to be 2565
This option is available for the dimension objects and wondering why it not offered for the inserted fields.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Is there another way to retract fillets? I've tried the ctrl, shift, and both at once. None of those key selections did nothing with my 3D drawing. Is there something I could do in my settings to adjust this?
View 9 Replies View RelatedI recently started drawing in cad, and i have a couple problems. At time now i am trying to learn more of isometric drawing and i have couple questions about drawing a particular figure:
21.jpg
So in there i don't know how to draw that "thing" witch i highlighted in red. I don't know at witch angle i should draw it's center(center length should be 50 cm). If I would know that, i could easily draw a isocircle above. So how do i find this "right" angle?
Second question would be about isofillets - i read here in forums that i should do them in isocircles, and i did that and i got good results - it looks very good, but the problem is, that in this drawing, it shows that those isocircles should have a defined radius - R6, R16 and etc, but if i do round corners with isocircles, i dont get that result(in R16 case radius is even way too big). So maybe there is a way to do them "right" and have them defined? I attached that drawing .
I have a shape that happens to have many nodes; it was simple to extrude it (inventor saw it as a complete shape) but adding fillets is another story. each tiny segment requires a click to select it. is there any way to simplify this — either through simplifying the path somehow or by selecting the edge in some other manner?
i saw a thread on the forums about imported 2d vector files with a similar issue. I did import my file but it came from rhino. everything is fine except this one issue. i guess i could go back to rhino but i would prefer not to.
i have attached a small screenshot of one area of my sketch.
I have come to Inventor after using Pro-Engineer and Solidworks. How to find the inspect tools difficult to use? The effort required to find the radius of a fillet (for example on imported parts) is huge. I am using IV 2013.
View 3 Replies View RelatedI'm using AutoCAD 2010 32bit on Windows XP with built-in video - so no hardware rendering, etc. I have a situation where a 3D solid that I have created looses its fillets while creating a PDF.
The solid was built using Union, Subtraction, Slicing and Fillet operations. I have attached the DWG and two PDFs - one with fillets, the other without. Both PDFs were created within moments of each other from the same DWG. Notice in the DWG that the solid model has now lost all the fillets on the edges, but they were there when the good PDF was generated. I create the PDFs using ACAD's Output | Export PDF feature on a single Layout in Paperspace. When the PDF is generating, for about two seconds you see the solid edges loose their fillets, and then sometimes return to normal, but other times the DWG changes and I have to add the fillets again.
I know about using the Print option, and also 3rd PDF generators but they also fail - plus, I want to use Output because it's more convenient. I like AutoCAD, but I am thinking of dumping it for SolidWorks (which I just evaluated for 30 days). I can't be putting a lot of time into models that loose their fillets. This same issue happened to me about a year ago, and I finally had to re-create the model from scratch to solve. It's ridiculous that this doesn't work, it's kinda fundamental.
BTW: I tried a fresh OS and ACAD install and the problem persists.
I would like to place arrowheads on the vertical sectioning lines (for the hatched view on the right), as well as on the horizontal line (for the bottom view), but I couldn't succeed in doing this. So, I left it just as line without arrowheads. Also, I would like to know if there are options for dimensioning fillets, as the one in my drawing comes with round symbol of portion of circle upon which the arrowhead touch (instead of on the fillet itself) - see R.12 and R.50.
View 9 Replies View RelatedI have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
how to make the fillets goes the opposite direction.I want the fillets to round the edges not join the edges together
View 6 Replies View RelatedI just made a 3D model with ACAD 2011.
fixed_pedestal.dwg
It has chamfers and fillets. When i copy the 3D model, the copy doesn't have any chamfers or fillets .
I have a part that requires a large number of fillets. What would be the best approach, so it doesnt take 5 hours to update the model everytime i update something on the model?
View 2 Replies View RelatedI am using Inventor 2012 and have recently experienced a problem with the fillet not working correctly. I have a curve and a straight line that connect and when I select fillet it will allow me to select the curve but not the straight line. I have been able to do this in the past with no problems.
View 4 Replies View RelatedI have a tube steel frame and need to show weldments between the tubes except for the inside fillets. I then need to show sanding the welds flush. Also I need to show a rounded edge where the mitered point meets the outside edge of the tube beside it. I'm very new with inventor Attached is my curret drawing file.
View 1 Replies View RelatedI currently click on a shape to see the grips. Then I put the cursor on a grip and see a window open that gives me the options of Stretching a vertex, Adding a vertex, or Removing a vertex. Is there a way when adding a vertex that you can add Mulitple vertexs without having to click on add vertex every time.
View 3 Replies View RelatedI would like to add text to my dimension but as I have overridden my FONTALT variable it does not display. The dimension on the LHS is exactly the same as the one on the RHS (during edit). Neither will display the text I want which in this instance is WEB.
View 5 Replies View RelatedI made a drop down menu for offset commands back on a 2010 version. I wish to bring it over but I'm having a bit of trouble. I have read through and watched a few videos and they all tell me the same thing. Go into the CUI, click on Load Partial Customized File. I do this, select my cui file and I get an error that says:
Partial customization file cannot have the same Customization Group Name as the main customization file.
The name of my file is OFFSET MENU. I'm running 2012 version and I have finally gotten almost everything setup except for this.
How do I add the ribbon to 2010? I just have pull downs and tool bars.
View 4 Replies View RelatedI have a drawing with the x and y as grid references, I have an excel spreadsheet with point information with grid references which are within the range on the drawing. How do I put the excell info onto the drawing?
View 8 Replies View Related