AutoCad 3D :: Solids Taper With Square Base Up To Round Top
May 13, 2010I'm working on this shape: it has square base, goes to the top round , and round top is shiffted off center.
View 9 Replies
ADVERTISEMENT
AutoCAD 2010 :: Adding Round Or Fillets To Solids?
Mar 3, 2012Is there a way to add "Round or Fillets to solids"?
View 2 Replies View RelatedAutoCad 3D :: Solid Square To Round Transition?
Jul 19, 2007Im a trying to solid model a square to round transition.
View 9 Replies View RelatedAutoCAD Inventor :: Square To Round Transition Options
Apr 14, 2012I have a square to round transition that I need formed up and the shop is telling me that they would prefer to split this thing at the corners rather than the flats. I've tried two different ways of doing this but how to handle this part. It's 10.75" OD at the bottom and 2'-4" square at the top and 1'3" in length and made of 1/4" stainless steel plate. The shop wants this in four bent pieces that they can weld together down the corners.
I've tried making just the one side but I'm not getting the results I would like to see. Making the full transition (as in the picture above) gives the finished result I am looking for but I can't separate it into multiple sides.
AutoCAD 2013 :: 3D Modeling Pyramid - Rectangular Base Instead Of Square
Feb 14, 2013Can I make a pyramid has a rectangular base instead of a square?
View 7 Replies View RelatedAutoCAD Inventor :: Weld Round Bar To Square Hollow Section
Mar 22, 2013I have a solid bar which has a diameter equal to the nternal dimensions of a SHS. I am trying to create a weld, basically to fill the gap with a weld. I tried a similar arrangement with a Circular Hollow Section and it worked perfectly. I have tried fillet and groove for the SHS but it will not accept it.
View 3 Replies View RelatedAutoCAD Architecture :: Change Default Square Columns To Round?
Jul 27, 2013I have modeled a house with some colums supporting a deck. Ideally I would like my colums to be round with a spiral twist.. But would be happy to know how to change the default square into a round colum.
View 1 Replies View RelatedAutoCAD Inventor :: Square To Round Transition - Sheet Metal
Oct 18, 2011Here I am attaching a square to round transition duct drawings which is weld assembly & assembly drawing in pdf, This one was made in Inventor from one of our principle maker, I am trying to make this similar in inventor as I couldn’t, I am pretty good in sheet metal able to make the casing well, but couldn’t the assembly of pins and making of cladding sheets on that curved surface.
Autodesk Inventor 2010.
Windows XP.
AutoCad 3D :: Section Of Ductwork Is A Transition From 12x8 Square To 8 Dia Round
Jan 28, 2007Alright, I'm trying to make a section of ductwork that is a transition from 12x8 square to 8 dia round. I've tried all kinds of methods, but nothing has really gotten me an accurate, realistic model.
View 9 Replies View RelatedAutoCAD Inventor :: Smoothing Faces Of A Loft (square To Round Shape)
Oct 16, 2013When I make a loft, from a 12x12 square to an 8" circle (12" high for the sake of arguement), the corners of the square kind of loft up to the circle where it's corners would be...leaving a sharp break between the planes
Is there a way to make it look like the sheet metal lofted flange appears? So that the corners of the square drift to the quadrants of the circle, making a smooth transition?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
GIMP :: How To Round All Square Corners
Aug 5, 2012Suppose we have a standard QR code composed of hundreds of squares and their hundreds of square corners. (e.g., [URL]......)
How can I get Gimp to round all of the internal and external square corners - let's say to a 10 pixel radius?
AutoCAD Inventor :: Unable To Get Exact Flat Pattern Layout For Round To Square Transition
Nov 4, 2013I am able to extract an flat pattern (for round to square) but not exactly as the customers drawing.
The original drawing shows some relief in bending lines which i am not able to add in inventor. after a glance at the attachments you will clearly understand what i want.
Photoshop :: Make Round Coner Of Square
Jun 10, 2004How can round the coners of the square.
View 3 Replies View RelatedPhotoshop :: Make A Square With Round Corners With Certain Radius
Mar 2, 2013I would like to make a square with round corners with certain Radius. I use Rectangular Marque Tool with Feathering set to some value. The thing is that when I cut the shape from Layer I don't get a sharp corner but instead I have shaded corner.
View 9 Replies View RelatedGIMP :: Round Corners Of A Square Or Rectangle Using Two Functions
Dec 2, 2013With Gimp you can round the corners of a square or rectangle using two functions: the problem is that doing so all four corners will be rounded, while I am interested in only the two upper corners. Here's an example of what I would do.
View 1 Replies View RelatedPaint.NET :: Change Paintbrush Type From Round To Square?
Feb 20, 2013How do I change the paintbrush type from a round type to a square type, & make it permanent 'till I changed it?
View 5 Replies View RelatedPaint.NET :: Design Square Icon With Round Corners?
Mar 15, 2013I want to design a square icon with round corners. How do I get rid of the little white triangles in the four corners? I tried to design my icon on a transparent square canvas but I still get the little white triangles in the corners!!! And it does not seem possible to resize canvas to "fit" image size...
View 4 Replies View RelatedIllustrator :: Create Shape With Round And Square Corners?
Feb 4, 2013I haven't used illustrator for a while so I'm really stuck on soemthing that should be simple.
I want to create a shape that has round corners on the bottom and square cormers at the top.
I have created two shapes, one with round corners and one with square one.
I was hoping to put them together then use the pathfinder to unite them but this then make the round corner square.
Is it possible to unite shapes with different corners.
CorelDRAW X3 :: Crop Image And Make Edges Round Instead Of Square?
Mar 17, 2008I want to crop an image and make the edges round instead of square. Do I do this with a mask? Can't figure out how to use a mask. I went to Mask Outline->Smooth and it cut the image out and left the round edges.
View 12 Replies View RelatedGIMP :: Extend Drawing Border And Change It From Square Outer Border To Round
Nov 11, 2012I have a drawing that has a white background.
I would like to add more to the white background to make it bigger without having to stretch it and distort the image.
I want to place a circle shaped outline border around the original image with a set border thickness and color and be able to crop/remove the portion of the image beyond the outline, changing it from a square/rectangle image to a circular image.
If I am not able to change the drawing to have a round outer border from square, how can I make the outer parts past the newly created circular outline transparent?
AutoCAD Civil 3D :: Add Base Or Sub-base Depth To Transition Lane?
Apr 6, 2011Is it possible to add a base depth to the transition lane assembly? I need to do volumes for my road, (pavement, base) but there is a section with a transition (which only has one depth), so that section is off.
View 5 Replies View RelatedAutoCad 3D :: Extrude Along A Taper
Jun 1, 2011I have a hat section brake shape that I want to extrude along a taper. But so far when I try to do this I don't get the results that I want. When I chose EXT, then "T" for taper and put in the angle of 9° and a length of 12, I get a very short piece which tapers in the wrong plane.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Diesel Expression - Display Area In Square Feet Not Square Inches?
Feb 16, 2010How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
AutoCAD Civil 3D :: Pavement Thickness Taper (not Lane Width)
Aug 1, 2012I have an "ultimate" profile that has be set for a proposed roadway the first 1500' of the roadway will be constructed at this final profile while the last 900' will be constructed for an interim design not at the full depth pavement. So my typical for the final is 9.25 inch of pavement over 14" of stone and the interim is 4" over the same 14" of stone when we transition from the 4" to the 9.25" we are using a 20:1 taper the question is how to model this taper condition and have you had any success.
View 1 Replies View RelatedAutoCad 3D :: Draw Octagonal Luminaire Arm With Slight Taper For Light Pole?
Jun 26, 2013I am trying to draw an octagonal luminaire arm with a slight taper for a light pole by sweeping along a polyline profile. Sometimes it lets me do it, most of the time it doesn't. I can do a scaled sweep along a straight path and an unscaled sweep along a curved path, but I cannot do a scaled sweep along a curved path.
View 9 Replies View RelatedAutoCad 3D :: Taper To Create Sloped Wedge Indentation On Edge Segment?
Jul 17, 2013I need to create a 3D model of a segment of a jogging path/trail that has a drainage feature called a knick. I pasted a freehand drawing of what a knick looks like below this post. It's a semi-circular area that slopes to one side at a small angle on a trail that is otherwise flat. I need a model of a trail segment with two of these sloping indentations that is just a smooth, gray object- nothing fancy. I managed to create a simple 3D model for a second trail design that has a slope to one side throughout the trail- made a box with a tapered edge and rendered it gray.
Since to my eye a knick looks like a lemon wedge indented into the face of a box- that's what I've been working towards. Made a box, made a cylinder, moved the cylinder so half of its base sits on top of the box face on which I want the indentation, and then used pushpull and subtract to take out a shallow semi-circular cut off the top of the box (did two of these about 20 units apart on the same face).
I don't know how to taper the semicircular cut so that it actually slopes off the face to the edge and doesn't look like a clean cut depression. I need it to slope to the edge at a 2% angle. I've tried tapering many times, but I don't think I completely understand the concept of the tapering axis because all I end up doing is tapering the various faces of the box and the knick cut stays the same. I also tried out all the tools on the ribbon that look like they can be used for filling in or smoothing edges, but without any luck. Should I be approaching the process of making the knick from a completely different set of commands?
AutoCAD 2010 :: Taper Circular Object 1-1/2" High On 45 Degree Angle?
Jan 20, 2012I'm trying to figure our how to taper a circular object 1-1/2" high on a 45 degree angle from the top down (that is the lower part goes in like a pie pan). Taper doesn't seem to work.
View 2 Replies View RelatedPaint.NET :: Put Round Text Into Blank Round Space?
Apr 10, 2011I have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
GIMP :: Make Free Select Non-square Selection Perfect Square
Mar 22, 2013I used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedAutoDesk Smoke :: Taper Image / Surface In Action?
Feb 10, 2013Is there a way to taper an image/surface in action?
To explain: for my project I am taking hi res stock photography, separating out the mid, fore and backgrounds saving as individual layers then bringing into action.
With my current image there is a sea and sky. To make the illusion of 3d scenes I am angling the surfaces down there natural line of perpective to add depth so that when I slowly track the camera from right to left there appears to be depth and parallax.
For this example I am tilting the sea from being perpendicular to the camera to being tilted right back. When I do this the top of the picture which is now further away from the camera eye appears smaller. To compensate for this I would like to 'taper' the object. I know I can set the surface to being bicubic but then I have to work with bezier handles as moving the vertices bends it all around.
Is there either a way to make the handles have no beziers or is there a simple taper tool I can use?
Photoshop :: Can't Select (stroke Path) In CS6 To Taper Pen Tool Edges?
May 29, 2012For some reason I can't select the "stroke path" option with the pen tool in photoshop to add tapers to my pen tool strokes. I can only get dead lines. why is this not working?
View 4 Replies View Related