AutoCad 3D :: Solid Square To Round Transition?
Jul 19, 2007Im a trying to solid model a square to round transition.
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Square To Round Transition Options
Apr 14, 2012I have a square to round transition that I need formed up and the shop is telling me that they would prefer to split this thing at the corners rather than the flats. I've tried two different ways of doing this but how to handle this part. It's 10.75" OD at the bottom and 2'-4" square at the top and 1'3" in length and made of 1/4" stainless steel plate. The shop wants this in four bent pieces that they can weld together down the corners.
I've tried making just the one side but I'm not getting the results I would like to see. Making the full transition (as in the picture above) gives the finished result I am looking for but I can't separate it into multiple sides.
AutoCAD Inventor :: Square To Round Transition - Sheet Metal
Oct 18, 2011Here I am attaching a square to round transition duct drawings which is weld assembly & assembly drawing in pdf, This one was made in Inventor from one of our principle maker, I am trying to make this similar in inventor as I couldn’t, I am pretty good in sheet metal able to make the casing well, but couldn’t the assembly of pins and making of cladding sheets on that curved surface.
Autodesk Inventor 2010.
Windows XP.
AutoCad 3D :: Section Of Ductwork Is A Transition From 12x8 Square To 8 Dia Round
Jan 28, 2007Alright, I'm trying to make a section of ductwork that is a transition from 12x8 square to 8 dia round. I've tried all kinds of methods, but nothing has really gotten me an accurate, realistic model.
View 9 Replies View RelatedAutoCAD Inventor :: Unable To Get Exact Flat Pattern Layout For Round To Square Transition
Nov 4, 2013I am able to extract an flat pattern (for round to square) but not exactly as the customers drawing.
The original drawing shows some relief in bending lines which i am not able to add in inventor. after a glance at the attachments you will clearly understand what i want.
AutoCad 3D :: Solids Taper With Square Base Up To Round Top
May 13, 2010I'm working on this shape: it has square base, goes to the top round , and round top is shiffted off center.
View 9 Replies View RelatedAutoCAD Inventor :: Weld Round Bar To Square Hollow Section
Mar 22, 2013I have a solid bar which has a diameter equal to the nternal dimensions of a SHS. I am trying to create a weld, basically to fill the gap with a weld. I tried a similar arrangement with a Circular Hollow Section and it worked perfectly. I have tried fillet and groove for the SHS but it will not accept it.
View 3 Replies View RelatedAutoCAD Architecture :: Change Default Square Columns To Round?
Jul 27, 2013I have modeled a house with some colums supporting a deck. Ideally I would like my colums to be round with a spiral twist.. But would be happy to know how to change the default square into a round colum.
View 1 Replies View RelatedAutoCAD Inventor :: Smoothing Faces Of A Loft (square To Round Shape)
Oct 16, 2013When I make a loft, from a 12x12 square to an 8" circle (12" high for the sake of arguement), the corners of the square kind of loft up to the circle where it's corners would be...leaving a sharp break between the planes
Is there a way to make it look like the sheet metal lofted flange appears? So that the corners of the square drift to the quadrants of the circle, making a smooth transition?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
GIMP :: How To Round All Square Corners
Aug 5, 2012Suppose we have a standard QR code composed of hundreds of squares and their hundreds of square corners. (e.g., [URL]......)
How can I get Gimp to round all of the internal and external square corners - let's say to a 10 pixel radius?
Photoshop :: Make Round Coner Of Square
Jun 10, 2004How can round the coners of the square.
View 3 Replies View RelatedPhotoshop :: Make A Square With Round Corners With Certain Radius
Mar 2, 2013I would like to make a square with round corners with certain Radius. I use Rectangular Marque Tool with Feathering set to some value. The thing is that when I cut the shape from Layer I don't get a sharp corner but instead I have shaded corner.
View 9 Replies View RelatedGIMP :: Round Corners Of A Square Or Rectangle Using Two Functions
Dec 2, 2013With Gimp you can round the corners of a square or rectangle using two functions: the problem is that doing so all four corners will be rounded, while I am interested in only the two upper corners. Here's an example of what I would do.
View 1 Replies View RelatedPaint.NET :: Change Paintbrush Type From Round To Square?
Feb 20, 2013How do I change the paintbrush type from a round type to a square type, & make it permanent 'till I changed it?
View 5 Replies View RelatedPaint.NET :: Design Square Icon With Round Corners?
Mar 15, 2013I want to design a square icon with round corners. How do I get rid of the little white triangles in the four corners? I tried to design my icon on a transparent square canvas but I still get the little white triangles in the corners!!! And it does not seem possible to resize canvas to "fit" image size...
View 4 Replies View RelatedIllustrator :: Create Shape With Round And Square Corners?
Feb 4, 2013I haven't used illustrator for a while so I'm really stuck on soemthing that should be simple.
I want to create a shape that has round corners on the bottom and square cormers at the top.
I have created two shapes, one with round corners and one with square one.
I was hoping to put them together then use the pathfinder to unite them but this then make the round corner square.
Is it possible to unite shapes with different corners.
AutoCad 3D :: Round Over Existing Solid Forms
Dec 22, 2013Can you round over existing solid forms in autocad 2010. My solid is 30mm thick and I want to round-over the edges with a 6.5mm radius.
View 2 Replies View RelatedCorelDRAW X3 :: Crop Image And Make Edges Round Instead Of Square?
Mar 17, 2008I want to crop an image and make the edges round instead of square. Do I do this with a mask? Can't figure out how to use a mask. I went to Mask Outline->Smooth and it cut the image out and left the round edges.
View 12 Replies View RelatedGIMP :: Extend Drawing Border And Change It From Square Outer Border To Round
Nov 11, 2012I have a drawing that has a white background.
I would like to add more to the white background to make it bigger without having to stretch it and distort the image.
I want to place a circle shaped outline border around the original image with a set border thickness and color and be able to crop/remove the portion of the image beyond the outline, changing it from a square/rectangle image to a circular image.
If I am not able to change the drawing to have a round outer border from square, how can I make the outer parts past the newly created circular outline transparent?
AutoCAD Visual LISP / AutoLISP :: Diesel Expression - Display Area In Square Feet Not Square Inches?
Feb 16, 2010How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
Paint.NET :: Put Round Text Into Blank Round Space?
Apr 10, 2011I have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
GIMP :: Make Free Select Non-square Selection Perfect Square
Mar 22, 2013I used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Select Non-solid Entities On Solid Layer
Mar 19, 2012We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
AutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
AutoCAD Civil 3D :: Import 3D As Solid Objects Or Convert Polymesh To Solid
Jun 18, 2013I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?
Sep 16, 2013How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
AutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedAutoCad 3D :: Trim Diagonal 3D Solid To Top Of Horizontal 3D Solid In Picture?
Jul 10, 2013Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedAutoCAD Inventor :: Make Solid / Change Parameter Of Solid
Nov 18, 2012I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
AutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern
Dec 13, 2012i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View Related