AutoCAD 2013 :: 3D Modeling Pyramid - Rectangular Base Instead Of Square
Feb 14, 2013Can I make a pyramid has a rectangular base instead of a square?
View 7 Replies
ADVERTISEMENT
AutoCAD 2010 :: Create Pyramid Where Base And Top Are Rectangles Not Squares?
Feb 17, 2012How would I create a pyramid where the base and top are rectangles not squares?
View 6 Replies View RelatedAutoCad :: Rectangular Pickbox Instead Of Usual Square
Jan 11, 2007Using: AutoCAD 2004
For some reason unbeknownst to me, my pickbox (and my crosshair aperture) has changed to a rectangle instead of the usual square. My resolution and screen size is all fine, and I've not changed anything in my settings.
AutoCad 3D :: Creating A Square / Rectangular Geometry On Inclined Surface
May 12, 2013This is a very old project and even with more knowledge in 3D, still unable to do it. I have a stool with incline legs using the LOFT command (Extrude with Path can also do it). Now I need to add a tranverse section. I wanted to have the tranverse section same dimension as the leg.
Given the inclination of the leg, it is impossible and futile to align ucs using 3 points or face because there is no 90 deg between the two edges. Further more given there is no extrude to face as in inventor, it is sound difficult to extrude between the "/" form and the "" form of the two legs.
D problem? On geometry, is there a rule to adapt here with respect to section dimension?
AutoCad 3D :: Solids Taper With Square Base Up To Round Top
May 13, 2010I'm working on this shape: it has square base, goes to the top round , and round top is shiffted off center.
View 9 Replies View RelatedAutoCAD Inventor :: Sheet Metal ILogic Rule Not Executing On Non-rectangular Base Sketch?
Aug 5, 2013I have a template that I have created, in it I have a rule that changes the stock number and description based on which sheet metal rule is selected. The weird thing is it works correctly if the first sketch is a rectangle. If you sketch a circular shape and make that the face it will not work. It blanks out the values for the stock number and description.
I'm running Inventor 2014 update 2.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 33212 StartFragment: 314 EndFragment: 33180 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimiPropValAsString=""
DimiPropDesAsString=""
SelectCaseSheetMetal.GetActiveStyle()
[code]...
Xara :: Auto Detect Foreground Image (non-square / Non-rectangular)
May 23, 2011I'm new to Xara Photo & Graphic Designer 6 and to graphics in general.
In layman's terms I would like to know how this programme can auto detect a foreground image (any non-square/non-rectangular image), select it and then delete everything else around it.
Whatever is deleted around it needs to be transparent, not white, so that I can copy and paste the sole foreground image into Powerpoint so that the image doesn't end up with a square white background around it (especially when my Powerpoint template has a non white background).
I'm not working with finnicky images or detailed photos. They're mostly two colour stock images like black silhouettes of people against white backgrounds, so I thought that kind of image would be relatively easy to 'smart select' and separate from the contrasting background colour.
Can this Xara programme do this for me? If not, is there any other basic and cost effective programmes that can do this for me? It's literally the only editing function I need in a graphics programme.
Photoshop Elements :: Put Rectangular Photos On Square White Backgrounds?
Feb 17, 2014I have 6 rectangular photos and I'd like to put each of them on 6 square white backgrounds and then save the resulting images (it's for posting on Instagram - it's crazy that they don't allow you to post rectangles, but there you go). What would the most time-efficient way of doing this be?
View 4 Replies View RelatedPhotoshop :: Why Layer Masks Now Square With Circle In Middle Not Rectangular White / Black
Jun 9, 2013Why would my Layer Masks in Adobe Photoshop CS5 extended Now be a square with a round circle in middle and not rectangular & black or white like they were originally ?
View 6 Replies View RelatedAutoCAD Inventor :: Skeletal Modeling - Cannot Use 3D Sketch Lines In Skeleton Base Part
Sep 14, 2011Why can i use lines from a 3d sketch to constraint a part to a skeleton base part?
I have attached a example where i try to constraint the tube.ipt using 3D geometry lines of the part Layout_3d_sketch.ipt in the assembly teste.iam, but i'm unable to select any lines from that file.
Why can't i use this 3D sketch lines in a skeleton base part?
3ds Max Modeling :: Rectangular Marquee Is Not Selecting All Polygons?
Aug 8, 2013My rectangular marquee is not selecting all polygons within the rectangular selection.
View 5 Replies View RelatedPhotoshop :: Square Pixels Or Rectangular Pixels For Video
Sep 12, 2005If I am constantly making frames in photoshop for use in the video world (ie. They will be on TV) the pixels need to be rectangular (or 4x3) in aspect and not square.
I know in programs like After Effects and Combustion you can set when saving an image whether or not it is square or rectangular pixels.
How do I do this in Photoshop if it can be done?
3ds Max Modeling :: Merging Square And A Circle?
Jun 13, 2013Im trying to merge two shapes....a square and a circle. (see attached image)
Ive tried using Boolean options and the Attach command but although it links them it doesnt remove the interior geometry. Im sure this is the easiest question ever posted on this forum but I just cant figure it out.
Im trying to get one single shape that I can extrude.
AutoCAD 2013 :: Editing The Rectangular Part Numbering Tag?
Sep 20, 2012Can the rectangular box around the number tag be edited or removed all together?
View 1 Replies View RelatedAutoCAD 2013 :: Possible To Erase Some Items Of A Rectangular Associative Array
Dec 4, 2012In Autocad 2013, Is it possible to erase somme items of a rectangular associative array. I have seen that we can replace an object with a different one.
View 8 Replies View RelatedAutoCAD 2013 :: Can't Find Option To Use Angle In Rectangular Array
Jun 24, 2012I can't find the option to use angle in rectangular array in AutocAd 2013. I am using the classic view mode.
View 7 Replies View RelatedAutoCAD 2013 :: Copy With Text As A Base Point
Nov 11, 2013When I'm copying an object like a bubble note callout (number 1 with a circle around it) I want to be able to snap to the end of the text string so I can copy it uniformly and spaced evenly.
View 2 Replies View RelatedAutoCAD 2013 :: View Base With Extra Lines
May 28, 2013I am using 2013 and have a few 3D objects in the modeling space that I am using view base to put different views of each into the paper space. When I do this and export to PDF, I get an extra green line from the paper space. I have deleted and replaced the view and have tried different views with varying sucess.
Some pieces simply need a different view, however I have one that will not go away. The different view does really solve the problem either because I need the view with the problem. I have attached a picture of the issue, but it is just a chunk to protect information that I cannot share. The gray in the drawing is the part, the green line should not be there. The green line only shows up on the PDF, not in modeling space or paper space.
AutoCAD 2013 :: Base View Command Not Working
Dec 17, 2013I've just recently been having a problem with the base view command. While trying to create the base view from model space all I get is the move command. Also from inventor the command changes to fillet. I've uninstalled AutoCad 2013 completly then reinstalled but continue to have the same problem.
View 9 Replies View RelatedAutoCAD Inventor :: How To Start Edit Base Solid In 2013
Apr 20, 2012How to start menu Edit Base Solid in Inventor 2013?
When i choose Edit Solid in Inventor . start Inventor Fusion
AutoCAD 2013 :: Multiple Dimensions Will Not Scale In Base Views
Oct 31, 2012How can I set the multiple dimensions "ordinates" to scale correctly in base views. The old vanilla ordinate dims work fine, but power dims ordinate give me improper scaling.
View 2 Replies View RelatedAutoCAD 2013 :: Base View Layer Properties Retention
Dec 19, 2012If there was a way to retain original object layer properties when in base view. IE I have 4 layers, each with a different color. I would like to create a base view, and still keep the object layer colors. Is there a work around for this? Or should I just do an elevation and work through VP's?
View 2 Replies View RelatedAutoCAD Civil 3D :: Add Base Or Sub-base Depth To Transition Lane?
Apr 6, 2011Is it possible to add a base depth to the transition lane assembly? I need to do volumes for my road, (pavement, base) but there is a section with a transition (which only has one depth), so that section is off.
View 5 Replies View RelatedAutoCAD 2013 :: Detach All Xrefs When Exiting A Base File Instead Of Unloading Them
Nov 15, 2013We prefer to detach all xrefs when exiting a base file instead of unloading them. Is there a way to have autocad remember which xrefs were used in the base file so that they can be reloaded all at once next time.
View 4 Replies View RelatedAutoCAD 2013 :: Copy With Base Point - Paste Options Inactive
Aug 5, 2013I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies View RelatedAutoCAD Inventor :: 2013 Drawing / Using Item Number As Base View Name
Aug 7, 2013At my company, we do a large amount of work with sheet metal parts and assemblies. On our drawings, we like to do "detail" views of the flat patterns of each part of the assembly. Basically, how we do it now is insert a base view of the assembly and the BOM onto the first sheet and then on separate sheets, we place base views of the flat patterns for each of the components that will be cut on our cnc plasma table. We use the item number to denote which part it is in the assembly. Is there any way to pull the item number from the assembly BOM and use it as a parameter that can be inserted into the view label? Right now, it's a nightmare if the assembly BOM is modified because we have to go back in to each view label and manually change the item number.
View 5 Replies View RelatedAutoCAD 2013 :: How To Make A Square Map Grid
May 27, 2012I have been issued the task of putting map grids on building plans. I have a number of building plans that I must put a square grid on top, with 2 meter between grid lines according to plan scale.
View 2 Replies View RelatedAutoCAD 2013 :: Command Copy Sets Base Point To 0 / 0 / 0 And Objects Vanish
May 8, 2013Using the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
AutoCAD 2013 :: Create Base View Doesn't Show Anything And Jumps To 0,0,0 Coordinates
Dec 30, 2013I created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
(pic 1 )- shows the usless view
pic 2 - shows previous view without any issues
AutoCAD 2013 :: Obtaining Square Footage Of Area
Mar 11, 2013I used to be able to obtain the sqare footage of an area with the AREA command. A list would generate about seven or eight lines, listing the square footage, inches, perimeter etc.
Now all i see is one line; the area/perimeter (see attachment). Did i change a setting somewhere to obtain this simplify version of the AREA cmd? Something is not right...
I tried the MASSPROP and MEASURE GEOM, those will not show the square footage. This used to be so easy, what am i missing...
AutoCAD 2013 :: Measuring Square Footage On Floor Plan
Apr 8, 2013I am trying to find a way to that I can very quickly measure the remaining square footage on a floor plan and/or equipment cabinet on a regular base. I have been working with AutoCAD for over 10 years so I am well aware of the typical command such as Distance, Measure & Area. I am wondering if with the latest AutoCAD 2013 there is a new command to do this faster.
View 3 Replies View Related