I've just recently been having a problem with the base view command. While trying to create the base view from model space all I get is the move command. Also from inventor the command changes to fillet. I've uninstalled AutoCad 2013 completly then reinstalled but continue to have the same problem.
View 9 RepliesIs it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
Im using A.cad Mech 13 I'm having a problem with the base view command on the layout tab,I have a 3D object in model space I then click the base view command,select my object and select display in layout 1, I then select my views top,side and Isometric when I hit enter to confirm all views disappear leaving my template empty.
View 2 Replies View RelatedWhen making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedI am using 2013 and have a few 3D objects in the modeling space that I am using view base to put different views of each into the paper space. When I do this and export to PDF, I get an extra green line from the paper space. I have deleted and replaced the view and have tried different views with varying sucess.
Some pieces simply need a different view, however I have one that will not go away. The different view does really solve the problem either because I need the view with the problem. I have attached a picture of the issue, but it is just a chunk to protect information that I cannot share. The gray in the drawing is the part, the green line should not be there. The green line only shows up on the PDF, not in modeling space or paper space.
Using the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
If there was a way to retain original object layer properties when in base view. IE I have 4 layers, each with a different color. I would like to create a base view, and still keep the object layer colors. Is there a work around for this? Or should I just do an elevation and work through VP's?
View 2 Replies View RelatedAt my company, we do a large amount of work with sheet metal parts and assemblies. On our drawings, we like to do "detail" views of the flat patterns of each part of the assembly. Basically, how we do it now is insert a base view of the assembly and the BOM onto the first sheet and then on separate sheets, we place base views of the flat patterns for each of the components that will be cut on our cnc plasma table. We use the item number to denote which part it is in the assembly. Is there any way to pull the item number from the assembly BOM and use it as a parameter that can be inserted into the view label? Right now, it's a nightmare if the assembly BOM is modified because we have to go back in to each view label and manually change the item number.
View 5 Replies View RelatedI created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
(pic 1 )- shows the usless view
pic 2 - shows previous view without any issues
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I am using AutoCad Mechanical 2013. I am trying to section in 3D but, when I press the Section Plane tool, it doesn't respond. See the picture below. At the bottom of drawing area its says "Command: _sectionplane Unknown command "SECTIONPLANE"."
View 2 Replies View RelatedI am using AutoCAD 2013 - Educational Version, and I want to convert my linework into a column grid. For some reason the COLUMNGRIDADD command is not being recognized by the program. When I type it in the command line, it just says Unknown Command.
Additionally, my Build Panel is missing from the ribbon, which is the other source for the column grid tools. I tried to reload or change the CUI, but so far this has not been successful.
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View Relatedhow to show section view in base view with out projection the component.
View 2 Replies View RelatedEach time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedI run fbxexport from the file pulldown, and it does not ask me to select objects, and says none of the objects in the drawing can be exported.
I type the command and it works fine.This was mentioned in past posts on 2012.
I am thinking it has something to do the the bug where 2014 could not export shape files, so you had to get a new providers.xml.
My IMX-Export command is also acting funny where it does not ask a filename to export, it uses the current dwg name.
[URL]
I had command shortcuts created in 2012 (in the acad.pgp file) for AECC commands like drawing feature lines, trimming feature lines, etc. My shortcut commands that began with AECC aren't working in 2013, perhaps becasue these now pull up a dialogue boxes before the command is shown in the command window? How I can get keyboard commands to work for this? I'm lost now looking for all sorts of buttons!
View 2 Replies View RelatedWhen I use the copy with base point command in paper space and try to paste it into paper space of another drawing it seems to come in on a different axis or something. I can see the view ports as they are supposed to be however the text just shows as a line. It would be as if I were to put text in model space on top view and see it just fine then go to a front view and see just a line.
View 5 Replies View RelatedI was wondering if there was a way to change the model my base views were linked to.
If I wanted to link the base view to a different model, would this be possible.
When I double click on the base view it shows the file path for the model that is currently chosen; however, it is all grey and I am unable to edit it or choose another file path.
How to change this? Is this even possible? Is it because I have annotated the drawing view that I am unable to change the model path?
what could have happened in an assembly when I've changed the cube front view (3D)? The projection has changed automatically (the view) in 2D. In other assemblies didn't happened the thing I've mentioned before even if I did the same thing meaning that I've modified the front view but 2D stayed in the same projection.
View 1 Replies View RelatedWhen starting a new idw, my first action is placing the base view. I would very much like to start a new 2D and have the "Drawing View" window automatically pop up. I'm not sure how to do this. Would it be part of the idw template, or is there a setting I'm oblivious to?
View 6 Replies View RelatedWe've got a new dwg template and we found that when we bring in a base view on a new drawing, the drawing changed to an idw format.
View 5 Replies View RelatedI'm trying to develop a program where I can use a base view based on the current view of a single part. The idea is basically export the contour of the part to the DXL format and save it to be used on cutting machines.
I've found something similar here, but in the context, it was necessary to use the path of the part to work, and I need it to recognize the part that is already opened.
I have a project with several parts that all fit together. I understand how to freeze all of the parts that I don't want in a viewport but how can I do the same for a base view?
I would like to have one layout with an exploded overview of all the parts and then a separate layout for each of the parts. Is it possible to freeze the parts I don't want within a base view like you can within a viewport?
I have this problem with my drawing. before I decided to post here, I first ask mr. google about the problem but to no avail. anyway, here's my problem:
I have this drawing. 3d object. with multiple items. and would like to create a 2d detailed view of the items.
what i did was isolate the first item and did the base view command. after the command, I then hid the first item and isolate again the second item. but then I always get this pop-up menu that says "A model has changed" and my item is missing. I ignored the warning and poceeded with my second model and so, on. after the process I unisolated all my items and most of the drawings are there and some are lost. Is there a proper way of doing this base view for multiple objects without disrupting the previous drawing that I objects?
I kept the code simple
fname = ThisDoc.FileName(False) 'without extension fpath = ThisDoc.PathoPartDocPath = fpath+""+fname+".ipt"oPartDoc = ThisApplication.Documents.Open(oPartDocPath, False)oDrawDoc = ThisApplication.ActiveDocument oSheet = oDrawDoc.Sheets.Item(1)oTG = ThisApplication.TransientGeometryoPoint1 = oTG.CreatePoint2d(5, 5)oBaseView = oSheet.DrawingViews.AddBaseView(oPartDoc, oPoint1, DrawingViewScale, kFrontViewOrientation, kHiddenLineDrawingViewStyle, "Default")
it is a local rule in an idw file that has been saved with an ipt file of the same name saved in the same directory. Now I get the most useless error message ever devised by manking
"The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))"
I need, using a macro, the ability to pre set the file that I am going to use as a "Base View" on a IDW file.
I call the ipt file "FRED.IPT", when I run the macro, it opens a new clean idw sheet and pre-sets the "Base View" to "FRED.IPT".
or
Automatically open a clean idw sheet and place the file "FRED.IPT" on the sheet, automatically.
I'm having a problem with Inventor 2011 professional on a 64Bit machine. I can make any size assembly with no problem but as soon as I go to make an idw the program crashes and shuts down. It doesn't matter if the base view is one part or 1000 parts as soon as I go to place the view inventor shuts down and I get an error.
View 9 Replies View RelatedWhen creating a new view of flighting on a tube part of it shows up like it should and part shows up as dashed lines and when you turn on "shaded" the parts that are dashed do not shade. All of the flighting parts come out of the same file and the tube is from a different file.
View 5 Replies View RelatedI'm pretty sure there's a way to do this but I am not sure on what code to use. I would like to have the "number" field on my title block template always get the "part number" attribute from the first base view (or first part/assembly) on sheet 1. This will be regardless of what sheet I am using the title block on. I could even store it as a custom property or something as I won't ever have two different part numbers in one drawing.
To clarify on that, we may have a welded assembly that has one single part number, but as I'm designing it, I just add a -1, -2, etc. to the end of the part number for each component being made. In the end when they're all welded together, it's one part number. Since no one else needs to see my -1, -2 etc, I'd like it to pull the part number from the assembly on sheet 1 for every sheet.
Somehow my IDW location box is got empty while placing the view in Inventor 2012.
I would like to return it back to normal.
[URL]