I am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
Noticed a change in the trim command between 2013 & 2014?
In 2013 (with out selecting trim all) the trim line didn't have to intersect the line you wanted to trim. We just upgraded to 2014 and I noticed that if I want to trim a line that the lines have to intersect. A line that doesn't intersect with the selected trim line will not trim.
[URL] Basically, when I accidentally input a typo into the command line there is a massive lag before AutoCad comes back to life. Nearly three seconds.
This happens on our AutoCad 2014 LT installations too.
I have all the predictive/corrective command line features turned off.
I have also uninstalled 360 and online content services, prior to the problem, to no avail.
Our office internet is proxied, and there are no ports opened for any Autodesk products.
It's losing us valuable seconds / minutes / days / weeks / months, depending on how you look at it.
The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
I'm having a problem with 2014 version. Property palette doesn't show the property of any object. It shows blank and same thing with quick select as well.
I am using AutoCad Mechanical 2013. I am trying to section in 3D but, when I press the Section Plane tool, it doesn't respond. See the picture below. At the bottom of drawing area its says "Command: _sectionplane Unknown command "SECTIONPLANE"."
I am using AutoCAD 2013 - Educational Version, and I want to convert my linework into a column grid. For some reason the COLUMNGRIDADD command is not being recognized by the program. When I type it in the command line, it just says Unknown Command.
Additionally, my Build Panel is missing from the ribbon, which is the other source for the column grid tools. I tried to reload or change the CUI, but so far this has not been successful.
I've just recently been having a problem with the base view command. While trying to create the base view from model space all I get is the move command. Also from inventor the command changes to fillet. I've uninstalled AutoCad 2013 completly then reinstalled but continue to have the same problem.
I had command shortcuts created in 2012 (in the acad.pgp file) for AECC commands like drawing feature lines, trimming feature lines, etc. My shortcut commands that began with AECC aren't working in 2013, perhaps becasue these now pull up a dialogue boxes before the command is shown in the command window? How I can get keyboard commands to work for this? I'm lost now looking for all sorts of buttons!
In the properties and quick properties dialog box the drop down box that shows diffrient arrowhead types to choose from have disappeared, and is blank.
Im trying to use the array command in lt2014, using the rectangular I can nearly get there apart from where is the old "row offset" and "column offset" buttons gone? If I don't know the offset as its on say louvre blade block by others I just want to snap to 2 points to set the distance. How is this done with the new array command?
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
For some reason when I start up Inventor 2014 it is preset to the centerpoint command. How do I change this to where it will not automatically do this?
I have made some changes to the CUII (URL....) and now when starting Civil 3D the command line stops. Hitting <Enter> bring the command line back to the "Type a command" prompt.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014 Dell Precision T1650 Windows 7 Professional SP1 64-bit Intel E3-1270 V2 3.5GHz / 32G RAM Nvidia Quadro 2000, Driver 331.82 Space Navigator, Driver Version 6.17.7
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on - if I plot to a real device or in PDF - if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Undo Command still turning off (disabled) constantly even after dumping the temp folder, and the turn off, turn on solution does not seem to work either.
Any solutions to this nagging issue other than re-install?
I recently migrated to the Inventor 2014 release and immediately encountered several issues.
One that I haven't found reported on this site is the problem related with the 3D mouse (3D connexion Space Navigator). I've been working with it beautifully with R2012-2013 but now that I started working on Inventor 2014 it stalls and stops working suddenly. It's so bad that I stopped using the 3D mouse entirely.
[URL]
I uninstalled and re-installed the latest mouse drivers and checked that it's not the device malfunctioning. I also installed the Inventor update available on Autodesk site. No change...
Interesting find this morning. In C3D 2014, the MAPEXPORT asks to save the file name, give the file a name, and then nothing happens. I have done a repair and to no avail, nothing. The dialog box does not appear, and no file is created.
Since upgrading to AutoCAD Architecture 2013 I've noticed that the sequence in which I type my commands no long works. I used to be able to highlight various items and then type in the command I want to apply to these items - i.e. Mirror, Erase, Scale, etc. But now with 2013 I will select the items, then type in the command, and the it asks me to again select the items I wish to apply the command to. What settings I need to change in order to fix this?
I am trying to take a custom counter I created as a family and have it show a material in my project. It seems that no matter how I apply the material parameter to the family type object, type or instanced, the material does not change in the project when I apply any new material. I have opened up other countertops I have used from the Revit Default Casework Family and I can't seem to find a difference in the setup between mine and Revit. I wanted to use an instanced parameter so I can change the material per room where the object is used.
I recently installed Inventor 2014. With Inventor 2013, I was able to do a Save Copy As on an IDW file to save it as either a DXF file or AutoCAD DWG file without any issues. In Inventor 2014, doing this produces the following dialog boxes in succession:
No DXF or DWG is produced. I tried doing this to a new, blank drawing from one of the default IDW templates and I get the same result. What can I do to fix this?
We use mandatory roaming profiles for our students and have done for some 14 years with all previous versions of our Autodesk products.
Now Inventor 2014 Pro (running on Windows 7 SP1 x64) will not open with a mandatory profile applied all I get is the new "Send AutoDesk your error box" Remove the mandatory profile and let the user create a local profile from the same default profile used to create the mandatory profile, Inventor works. The only clue I get to what might be happening is in the infocenter.log (within the Appdata section of the profile) where it states that the inventor.xml is not found. Without the mandatory applied the log is clear and the inventor.xml exists in the same folder.
