When I use the copy with base point command in paper space and try to paste it into paper space of another drawing it seems to come in on a different axis or something. I can see the view ports as they are supposed to be however the text just shows as a line. It would be as if I were to put text in model space on top view and see it just fine then go to a front view and see just a line.
View 5 RepliesI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
Using the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
Having a problem copy selection with base point and trying to past it in another drawing...
View 2 Replies View RelatedI am just trying to migrate from VBA to VB.net, I want to know, how we can manipulate the Ctrl+Shift+C, in vb.net, if it is not possible at all, then what is the best way I can find the alternate to this.
OR
If I try to use the wblockclone() then, how do I control the location of the objectcollection when I clone it in my new drawing.
in other words, when I in the proces of clonning I should be able to specify a base point.
I am taking some AutoCAD classes at the local community college, using AutoCAD 2012.
Using previous versions of AutoCAD the copy with base point is in the on screen right click drop down window.
To use the Copy With Base Point The Clip Board icon needs to be selected. How to get the Copy with Base Point and other paste commands in the drop down window as in all previous versions.
We have upgraded to AutoCAD Mechanical 2012, and I am having a little trouble finding where AutoDesk has relocated a few of the 2009 commands.
Where is the new location for Copy With Base Point? I used to go EDIT > Copy With Base Point.
I am enjoying a lot of the new features of AM 2012. It will just take a while to get used to where everything is at.
Is it possible to copy text using a base point in an idw? As I have been doing for years in AutoCAD...
Inventor Professional 2014.
Windows 7 64 bit.
When I'm copying an object like a bubble note callout (number 1 with a circle around it) I want to be able to snap to the end of the text string so I can copy it uniformly and spaced evenly.
View 2 Replies View RelatedWhen I download a drawing from some suppliers I find that I cannot do a "copy with base point" and paste that copy into my drawing except using "paste special" which leaves me with an unmanageable image. The source drawing has all the normal (it seems) attributes of a .dwg file and can be edited as a normal drawing; it just refuses to be "pasted" into my drawing. What am I missing here!
View 5 Replies View Relatedmany times, when I copy an object with the a dimension to it. It keeps the base point of the dimension and has a crazy long leg of the dimension that starts from the original place. how can I stop this from happening?
View 9 Replies View RelatedSince 2 days i can paste objects any more wich i copy with base point from another drawing.
When i say paste it doesnt give the question to wich point i wanna paste.
I cant find the problem did i hit a hotkey wich disable it or?
How to set 0 quardinates without screwing with the copy paste base point?
I use the command UCS, Object, Select my base point and measure from there rather than cluttering measurement lines; however, without using UCS, Previous when ever i copy and paste the base point for the copy paste is off.. yes i can reset just wondering why it does this.
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies View RelatedI have been using copy paste with base point on block from drawing to drawing but sometimes the block insert but it is not showing. I go to insert block is there but does not show in the drawing. Then tried to purge it and it does not let me because it is in the drawing but I can find it any where. Then I tried to do the insert block look for the block and inserted as a block and the same result.
View 3 Replies View RelatedHaving problem of trying to Move, Copy, Stretch etc an object and instead of being able to select a base point...Displacement (which is the default at the command prompt) is somehow selected and your object goes off to coordinate points? It's probably just a setting or its my mouse, but I didn't change anything and I'm just starting to see the problem.
View 2 Replies View RelatedWhat's the difference between the "Point" Parameter and the "Base Point" Parameter in the Block Authoring Parameter Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
I'm inserting blocks into my drawing and the block has a basepoint and a 0,0,0 point. The CAD guy who usually works with me is off today but he has a keyboard method of switching between the 2 points when inserting the block.
Its a fairly straight forward thing on his keyboard, nothing he has set up but standard in autocad.
I've had a try hitting a few keyboard buttons this morning but can't seem to do it.
I use point filters allot when measuring distances. I noticed today using Full CAD 2010 that when i measured a distance (Say 2m) using a "Y" point filter, between two objects not directly below one another the answer i got was wrong. It seemed to give me the distance of where my crosshairs where at the time of finishing the command.
I have tried this on another full system of CAD 2010 and a light version. Problem occurs on all.
I know that if you just measure between the points CAD will give you the (-Y) answer in the command line, but using point filters is an old habbit hard to kick.
Version of the CHSPACE.lsp command that has a "copy" option like the one from Intellicad?This version makes a copy of the selected objects first then moves them into the space you want, leaving the original objects alone in their original space.
View 3 Replies View RelatedWhenever I place a copy or paste from the clipboard AutoCAD freezes for about 5 -8 seconds and is very annoying. Time is money people. I know it's not a RAM issue. I don't have the problem with 2011 when I go back to it. What gives Autodesk? When is the next service pack due? This only happens with teh copy command
View 9 Replies View RelatedWhen I make a standard print of any object, I normally offer two or three views, I also include an isometric view of the object that I draw in a 3-D program, and I cut and paste a screen shot of that image into my Autocad file. I do this for the few of our Brothers who have a problem reading standard blueprints for their own reasons. After cut and paste, I find that the image quality is extremely poor, with ragged and unclear edges, I am not sure but I think the poor quality edges are called tesselation. Is there a solution to this condition?
View 2 Replies View RelatedWhen I draw an object (let's say a line that's 10 inches long) and paste it into corel the size varies based on how much I'm zoomed in.
fwiw I'm using 'paste special' and using picture (metafile) this way I can keep the points. if I just paste as autocad I loose the points, and an arc might become a rectangle as far as points go...
I'm having the same problem with DesignCAD actually.
is it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?
View 9 Replies View RelatedHow Can i Get the distance between two base point of any two block in any UCS and WCS
View 3 Replies View RelatedI received a 3rd party drawing which contains a block to indicate directions. The block does not display its base point and I am unable to find it. why this block is not displaying the base point.
View 9 Replies View RelatedIm using A.cad Mech 13 I'm having a problem with the base view command on the layout tab,I have a 3D object in model space I then click the base view command,select my object and select display in layout 1, I then select my views top,side and Isometric when I hit enter to confirm all views disappear leaving my template empty.
View 2 Replies View RelatedI have lots of block in a file in different places. How to change the base point of that block with out changing the position of that?
View 1 Replies View RelatedI encounter this.... after i select object for scaling, can't select base point.
View 2 Replies View RelatedCurrently, I have the base or insertion point of some of my blocks in an undesirable spot and I would like to move it. When I insert a drawing or block I have difficulty in placement due to a poor choice in the drawing or block I am trying to insert.
View 6 Replies View Related