Since 2 days i can paste objects any more wich i copy with base point from another drawing.
When i say paste it doesnt give the question to wich point i wanna paste.
I cant find the problem did i hit a hotkey wich disable it or?
When I download a drawing from some suppliers I find that I cannot do a "copy with base point" and paste that copy into my drawing except using "paste special" which leaves me with an unmanageable image. The source drawing has all the normal (it seems) attributes of a .dwg file and can be edited as a normal drawing; it just refuses to be "pasted" into my drawing. What am I missing here!
View 5 Replies View RelatedHaving a problem copy selection with base point and trying to past it in another drawing...
View 2 Replies View RelatedHow to set 0 quardinates without screwing with the copy paste base point?
I use the command UCS, Object, Select my base point and measure from there rather than cluttering measurement lines; however, without using UCS, Previous when ever i copy and paste the base point for the copy paste is off.. yes i can reset just wondering why it does this.
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies View RelatedI have been using copy paste with base point on block from drawing to drawing but sometimes the block insert but it is not showing. I go to insert block is there but does not show in the drawing. Then tried to purge it and it does not let me because it is in the drawing but I can find it any where. Then I tried to do the insert block look for the block and inserted as a block and the same result.
View 3 Replies View Relatedmany times, when I copy an object with the a dimension to it. It keeps the base point of the dimension and has a crazy long leg of the dimension that starts from the original place. how can I stop this from happening?
View 9 Replies View RelatedUsing the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I am just trying to migrate from VBA to VB.net, I want to know, how we can manipulate the Ctrl+Shift+C, in vb.net, if it is not possible at all, then what is the best way I can find the alternate to this.
OR
If I try to use the wblockclone() then, how do I control the location of the objectcollection when I clone it in my new drawing.
in other words, when I in the proces of clonning I should be able to specify a base point.
I am taking some AutoCAD classes at the local community college, using AutoCAD 2012.
Using previous versions of AutoCAD the copy with base point is in the on screen right click drop down window.
To use the Copy With Base Point The Clip Board icon needs to be selected. How to get the Copy with Base Point and other paste commands in the drop down window as in all previous versions.
We have upgraded to AutoCAD Mechanical 2012, and I am having a little trouble finding where AutoDesk has relocated a few of the 2009 commands.
Where is the new location for Copy With Base Point? I used to go EDIT > Copy With Base Point.
I am enjoying a lot of the new features of AM 2012. It will just take a while to get used to where everything is at.
Is it possible to copy text using a base point in an idw? As I have been doing for years in AutoCAD...
Inventor Professional 2014.
Windows 7 64 bit.
When I'm copying an object like a bubble note callout (number 1 with a circle around it) I want to be able to snap to the end of the text string so I can copy it uniformly and spaced evenly.
View 2 Replies View RelatedWhen I use the copy with base point command in paper space and try to paste it into paper space of another drawing it seems to come in on a different axis or something. I can see the view ports as they are supposed to be however the text just shows as a line. It would be as if I were to put text in model space on top view and see it just fine then go to a front view and see just a line.
View 5 Replies View RelatedI was wable to write some code that makes some already drawn objects on autocad into a selection set. What I need to do next is copy the selected objects and move them over like a distance of 50 to the right.
View 7 Replies View RelatedI am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
I have objects in Visio that I want to place into an AutoCad DWG. They can go in as a block. How do I do that?
View 6 Replies View RelatedI am using Visual Studio 2010 and AutoCAD 2012 64bit on a Windows 7 64 bit machine 8GB of ram. I am trying to copy a user selection and then paste the selection in another drawing or the same drawing based upon buttons on my form. The user will specify a base point and then select all of the objects to copy. I store the objects in a selection set so that the user could paste the selection multiple times into various drawings. The copy works correctly and I get a selection set from which I obtain the object Ids along with a point to transform my objects. My problem occurs during my paste routine. The Deep Clone Objects or WblockCloneObjects seems to be working correctly and then I get into my code to transform the entities. I'm also storing some information about the blocks so that I can manipulate our proprietary database later via another function call. It seems like everything works correctly, but when I select a large number of objects I receive a fatal error. FATAL ERROR: Unhandled Access Violation Reading oxffbc4008 Exception at ed010939h. It seems that the number of objects that people can copy varies on each user's computer.
View 2 Replies View RelatedWe installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I have AutoCAD 2013. I am trying to paste a block from another drawing to the one I am working on but when I paste the block, the color is different than what it should be. The drawing that I am trying to paste it on was already created for me.
View 3 Replies View RelatedStill getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
list all known reasons for pasting and inserting geometry to the DWG might fail.
1) Block that was not created by Autocad application was inserted to the drawing.E.g. the guy who does installation network sent you the file, and you happily inserted his work to your DWG.Bummer, copy paste stopped working.
SOLUTION: Weed out all of his blocks see Block removal thread. Design center might be of use (ADCENTER).
PREVENTION: Before inserting any outside work to your drawing do open it in Autocad and do EXPORTTOAUTOCAD command, than -PURGE /r, -PURGE /a, audit SAVE, CLOSE, RECOVER, SAVE. After that you can use the data more safely and insert to your drawing.
Do check block and attribute names and change to your needs. Try not to have same names if the actual block or attribute is really not the same.Check all the layer names, styles and line types too so you do not inherit what you do not need.
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
Can I do that? I want to import a surface from another drawing to my design drawing.
View 4 Replies View RelatedI'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies View RelatedI can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.
when i copy paste another persons drawing into mine,all the xrefs get placed well away from the the original drawing.
View 7 Replies View Relatedi'm guessing in track view/curve editor or in the parameter editor...
View 1 Replies View Relatedwhen i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.