AutoCAD LT :: Copy And Paste In Same Drawing Doesn't Work
Aug 20, 2013
I'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4Â
I have two DWG files and I want to paste the content of the first into the second file with the original coordinates. It sounds very easy (and I am sure it is) but I am still failing. I open the first file, select all (crtl a), copy all (crtl a), open the other file and want to chose the function: right click > paste with original coordinates. But this open is not active (grey) and can not be clicked. Actually there is no paste function available to click on if I do a right click.
list all known reasons for pasting and inserting geometry to the DWG might fail.
1) Block that was not created by Autocad application was inserted to the drawing.E.g. the guy who does installation network sent you the file, and you happily inserted his work to your DWG.Bummer, copy paste stopped working.
SOLUTION: Weed out all of his blocks see Block removal thread. Design center might be of use (ADCENTER).
PREVENTION: Before inserting any outside work to your drawing do open it in Autocad and do EXPORTTOAUTOCAD command, than -PURGE /r, -PURGE /a, audit SAVE, CLOSE, RECOVER, SAVE. After that you can use the data more safely and insert to your drawing.
Do check block and attribute names and change to your needs. Try not to have same names if the actual block or attribute is really not the same.Check all the layer names, styles and line types too so you do not inherit what you do not need.
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried -purge r, purge a, audit, save -wblock explode, purge a, audit, save to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
I've got a user that when he clicks on an item to highlight it, he can't drag it anywhere, can't copy and paste it, and can't delete it. I've uninstalled and resinstalled the application more than once. After an uninstall, I went through all directories and deleted all remaining files and folders that had either Autodesk or AutoCAD in the name and spent 1 1/2 hrs sifting through the registry and eliminating all Autodesk and AutoCAD entries. I then reinstalled the application (AutoCAD 2010), and the user is still having the same issues.Â
You can copy both the surface and the original (in this case contour polylines) data or only the surface. In both cases paste operation results into a copy of both data and surface.
Ok, But when paste and rebuild, the distance from original base point and destination point is applied in turn to the surface itself. Maybe it is a BUG ?
I have problem with attached block (also with other similar blocks with field). This block include field in block attribute. Works fine if I copy and paste this block. When I drag and drop from Tool Pallete field disappeary.
Why doesn't CS2 photoshop do a copy paste when you want to merge 2 images liek it does in CS3 photoshop. I can never print screen the image to start off in CS2 photoshop.
I just got Gimp 2.8 for Mac. I can open a picture, do a blur and export. The copy paste is giving me problems. It worked once. I make a selection with the rectangle and do a control c. I also tried the menu. The selection doesn't go to the clipboard. After 6 tries, the same original copy was the only one in there.
I keep finding that when I copy something in one Photoshop document, then go to another Photoshop document and hit CMD V to paste and nothing happens. So I hit CMD V again and it pastes. This happens all the time. Why doesn't it paste the first time?
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:Â
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
 I tryed audit/purge, and copying the HATCH again,  - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH!  AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts  above  20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH. Â
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.Â
I found, that with HATCH object some blocks is ALWAYS copying  from one file to another.
I have AutoCAD 2013. I am trying to paste a block from another drawing to the one I am working on but when I paste the block, the color is different than what it should be. The drawing that I am trying to paste it on was already created for me.
Still getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. Â I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. Â I have attached a screenshot of the command history while trying to paste as block. Â I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
When I download a drawing from some suppliers I find that I cannot do a "copy with base point" and paste that copy into my drawing except using "paste special" which leaves me with an unmanageable image. The source drawing has all the normal (it seems) attributes of a .dwg file and can be edited as a normal drawing; it just refuses to be "pasted" into my drawing. What am I missing here!
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Â Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
I recently downloaded a .SAT part from 3dcontentcentral.com and i would like to use it in an assembly i am creating. Problem is, once i pulled it into Inventor, I am unable to edit the part to match the dimensions necessary for my assembly. How do i go about editing this part? Is there a way that i can copy the components of the part and paste into a new drawing, save as a normal part, then edit? I have attached a screenshop of the part so you can see the Model tree.Â
p.s. I would simply redraw the part, however i am having a lot of difficulty getting it to look as i want it to.
In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
Anytime I copy and paste anything from one drawing to another (which I do often) it pulls in Layers, Dimstyles, and Blocks that aren't even in the drawing I am copying from?! I don't understand it. I have purged everything from each drawing prior to copying and pasting but after I paste, the items I just purged reappear. It is getting extremely annoying to have to purge CERTAIN items from a drawing that I don't want. I can't even do a purge all because there are blocks that I have in my prototype that I want to keep but don't necessarily use all the time.
I do not get into lisp commands, certain block items, 3d, etc. but am familiar with just about everything but I have ALWAYS had this problem. Just recently I have started to really concern myself with keeping my drawings "clean". I do not want dimension styles in my drawings that are not used and/or are not mine! Same with blocks! I would understand if I was copying block items into my new drawings that it might pull in some thing that are used inside the block that you may not see but this is happening when I pull in SINGLE LINES!!! ON LAYERS THAT ARE ALREADY IN MY DRAWING! It will pull in completely unused layers.
In AutoCAD 2011 in mapclassic mode I removed some buttons that I don't use from the Modify toolbar and now the copy command doesn't work. I can't even type in the command line.Â
I have been having trouble with the reselect tool for a while now. I often select something and then use new layer via copy ( J). The problem is that I cannot reselect after doing that (the option is grayed out), and it doesn't matter if I do the new layer copy with the shortcut or menu. Â I am using CS5 with Mac 10.8.4, just recently switched from 10.6.8 (it hasn't worked in either). I do know that I have successfully used reselect after J before, but it was on a work computer -- I believe that computer was running 10.6.8 but it might have been CS4 if I recall correctly. Â There are definitely workarounds like saving a selection or path, but they are still a little slower to use when it is something that I don't need to keep around for a while. I sometimes can use command-click on the layer icon but that selects the newly copied pixels, which can sometimes be different than what I had selected -- for example, if I copied a portion of a layer of linework, it will select the lines alone but not the area that I had.
