AutoCAD Inventor :: Copy Components Of Part And Paste Into New Drawing
Dec 3, 2012
I recently downloaded a .SAT part from 3dcontentcentral.com and i would like to use it in an assembly i am creating. Problem is, once i pulled it into Inventor, I am unable to edit the part to match the dimensions necessary for my assembly. How do i go about editing this part? Is there a way that i can copy the components of the part and paste into a new drawing, save as a normal part, then edit? I have attached a screenshop of the part so you can see the Model tree.
p.s. I would simply redraw the part, however i am having a lot of difficulty getting it to look as i want it to.
View 2 Replies
ADVERTISEMENT
Jan 10, 2014
If you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
View 4 Replies
View Related
Jan 17, 2013
I am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
View 8 Replies
View Related
Jan 29, 2012
I have one image that has a specific texture I want to reuse for my own custom image, but I'm not sure how to use it in the paint brush while working on the other one. Can I do it the way I described?
View 2 Replies
View Related
Oct 19, 2012
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
View 9 Replies
View Related
Oct 12, 2012
I have AutoCAD 2013. I am trying to paste a block from another drawing to the one I am working on but when I paste the block, the color is different than what it should be. The drawing that I am trying to paste it on was already created for me.
View 3 Replies
View Related
Jan 2, 2012
Still getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
View 2 Replies
View Related
Jan 14, 2013
list all known reasons for pasting and inserting geometry to the DWG might fail.
1) Block that was not created by Autocad application was inserted to the drawing.E.g. the guy who does installation network sent you the file, and you happily inserted his work to your DWG.Bummer, copy paste stopped working.
SOLUTION: Weed out all of his blocks see Block removal thread. Design center might be of use (ADCENTER).
PREVENTION: Before inserting any outside work to your drawing do open it in Autocad and do EXPORTTOAUTOCAD command, than -PURGE /r, -PURGE /a, audit SAVE, CLOSE, RECOVER, SAVE. After that you can use the data more safely and insert to your drawing.
Do check block and attribute names and change to your needs. Try not to have same names if the actual block or attribute is really not the same.Check all the layer names, styles and line types too so you do not inherit what you do not need.
View 6 Replies
View Related
May 30, 2012
I'm trying to take some writing from one image and paste it onto another photo.
View 1 Replies
View Related
Jul 28, 2012
Is it possible to copy and paste part of an image in one photo to another in LR4? I have a pc.
View 1 Replies
View Related
Jan 11, 2012
I was using "copy components" inside an .iam without any problem. Suddently, when I tried to copy more instances, inventor was blocked and I was not able to copy anymore components. Then I had to close inventor because it seems to be in a bucle.
View 4 Replies
View Related
Jan 13, 2013
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
View 9 Replies
View Related
Sep 13, 2010
Can I do that? I want to import a surface from another drawing to my design drawing.
View 4 Replies
View Related
Aug 20, 2013
I'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
View 9 Replies
View Related
Oct 11, 2013
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies
View Related
Mar 16, 2012
When I download a drawing from some suppliers I find that I cannot do a "copy with base point" and paste that copy into my drawing except using "paste special" which leaves me with an unmanageable image. The source drawing has all the normal (it seems) attributes of a .dwg file and can be edited as a normal drawing; it just refuses to be "pasted" into my drawing. What am I missing here!
View 5 Replies
View Related
May 13, 2012
I can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.
View 9 Replies
View Related
Mar 6, 2012
when i copy paste another persons drawing into mine,all the xrefs get placed well away from the the original drawing.
View 7 Replies
View Related
Oct 5, 2013
How do I copy one part of a photo and paste in another part of the same photo. element 12
View 2 Replies
View Related
Dec 4, 2013
when i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
View 3 Replies
View Related
Jan 29, 2013
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies
View Related
Mar 24, 2011
Since 2 days i can paste objects any more wich i copy with base point from another drawing.
When i say paste it doesnt give the question to wich point i wanna paste.
I cant find the problem did i hit a hotkey wich disable it or?
View 9 Replies
View Related
Jan 31, 2013
In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
View 8 Replies
View Related
Sep 29, 2011
Anytime I copy and paste anything from one drawing to another (which I do often) it pulls in Layers, Dimstyles, and Blocks that aren't even in the drawing I am copying from?! I don't understand it. I have purged everything from each drawing prior to copying and pasting but after I paste, the items I just purged reappear. It is getting extremely annoying to have to purge CERTAIN items from a drawing that I don't want. I can't even do a purge all because there are blocks that I have in my prototype that I want to keep but don't necessarily use all the time.
I do not get into lisp commands, certain block items, 3d, etc. but am familiar with just about everything but I have ALWAYS had this problem. Just recently I have started to really concern myself with keeping my drawings "clean". I do not want dimension styles in my drawings that are not used and/or are not mine! Same with blocks! I would understand if I was copying block items into my new drawings that it might pull in some thing that are used inside the block that you may not see but this is happening when I pull in SINGLE LINES!!! ON LAYERS THAT ARE ALREADY IN MY DRAWING! It will pull in completely unused layers.
View 1 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Aug 9, 2011
I am having an issue with the visibility of components underneath other, transparent components. The part which needs to be visible is a switch underneath a vacuum formed polycarbonate cover. When the cover is positioned open such that the switch would be partly visible even if the cover is opaque, the switch is rendered. When the cover is positioned closed, the switch is no longer rendered. I have attached JPG's of the two states.
I am on INV PDSU 2012 64 bit.
View 9 Replies
View Related
May 23, 2012
Having a problem copy selection with base point and trying to past it in another drawing...
View 2 Replies
View Related
Jun 14, 2013
Assembly comprised of multiple components all derived from the same master sketch "4 Inch Rail Master Sketch"
Using the sketch to drive geometry, using the parameters to drive various extrude lengths.
Geometry changes seem to propogate quite well, while parameter changes do not...is this a bug or am I doing something wrong? Generally have to open each individual part and "edit derived part" to force changes to propgate...
files attached (move end of part marker down for all .ipts).
View 9 Replies
View Related
Apr 1, 2013
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
View 9 Replies
View Related
Mar 15, 2013
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies
View Related
Apr 9, 2013
I made a simple aluminum frame with clear polycarbonate shields. Somehow, when I put it on drawing sheet, some parts behind the polycarbonate are missing. If i make the polycarbonate invisible, the missing parts appear again. This strange phenomenon started today. It didn't happen before, and no parts were missing behind the clear polycarbonate.
View 6 Replies
View Related
