I am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I have AutoCAD 2013. I am trying to paste a block from another drawing to the one I am working on but when I paste the block, the color is different than what it should be. The drawing that I am trying to paste it on was already created for me.
View 3 Replies View RelatedStill getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
list all known reasons for pasting and inserting geometry to the DWG might fail.
1) Block that was not created by Autocad application was inserted to the drawing.E.g. the guy who does installation network sent you the file, and you happily inserted his work to your DWG.Bummer, copy paste stopped working.
SOLUTION: Weed out all of his blocks see Block removal thread. Design center might be of use (ADCENTER).
PREVENTION: Before inserting any outside work to your drawing do open it in Autocad and do EXPORTTOAUTOCAD command, than -PURGE /r, -PURGE /a, audit SAVE, CLOSE, RECOVER, SAVE. After that you can use the data more safely and insert to your drawing.
Do check block and attribute names and change to your needs. Try not to have same names if the actual block or attribute is really not the same.Check all the layer names, styles and line types too so you do not inherit what you do not need.
When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
Can I do that? I want to import a surface from another drawing to my design drawing.
View 4 Replies View RelatedI'm attempting to copy paste a block and a line from one tab to another in the same drawing and it doesnt appear. I get
Command: _pasteclip Duplicate definition of block _Oblique ignored.
Duplicate definition of block _ArchTick ignored.
Duplicate definition of block attr_FFL ignored.
i've purged, i've audited, i've even created a new drawing and transfered the information but im still getting this problem.The strange thing is occasionally it works.also, i purge so the drawing it is clean, then i try to paste, then when purging again 1000's of blocks appear in the purge diologue box. A49285 to A55404 & a block called A$C4E2C21A4
I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies View RelatedWhen I download a drawing from some suppliers I find that I cannot do a "copy with base point" and paste that copy into my drawing except using "paste special" which leaves me with an unmanageable image. The source drawing has all the normal (it seems) attributes of a .dwg file and can be edited as a normal drawing; it just refuses to be "pasted" into my drawing. What am I missing here!
View 5 Replies View RelatedI can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.
when i copy paste another persons drawing into mine,all the xrefs get placed well away from the the original drawing.
View 7 Replies View Relatedwhen i copy paste this drawing from autocad architecture 2013 to another drawing it goes into that drawing in multiple scales
before after
I have checked all ins settings, I have tried to block it and unblock it, all items are there, some are just super small, some are normal.
In the past (using Autocad 2007), I could copy my AutoCAD drawing and paste it into a sketch in Solidworks. Since my company updated to AutoCAD 2013, I can't seem to paste anything into the Solidworks sketch.
View 1 Replies View RelatedI recently downloaded a .SAT part from 3dcontentcentral.com and i would like to use it in an assembly i am creating. Problem is, once i pulled it into Inventor, I am unable to edit the part to match the dimensions necessary for my assembly. How do i go about editing this part? Is there a way that i can copy the components of the part and paste into a new drawing, save as a normal part, then edit? I have attached a screenshop of the part so you can see the Model tree.
p.s. I would simply redraw the part, however i am having a lot of difficulty getting it to look as i want it to.
Since 2 days i can paste objects any more wich i copy with base point from another drawing.
When i say paste it doesnt give the question to wich point i wanna paste.
I cant find the problem did i hit a hotkey wich disable it or?
In Autocad 2013, when I highlight a drawing in model space and copy, then go to new drawing and paste to original coordinates, everything comes in fine except for blocks. the blocks get thrown far away from everything else.
View 8 Replies View RelatedAnytime I copy and paste anything from one drawing to another (which I do often) it pulls in Layers, Dimstyles, and Blocks that aren't even in the drawing I am copying from?! I don't understand it. I have purged everything from each drawing prior to copying and pasting but after I paste, the items I just purged reappear. It is getting extremely annoying to have to purge CERTAIN items from a drawing that I don't want. I can't even do a purge all because there are blocks that I have in my prototype that I want to keep but don't necessarily use all the time.
I do not get into lisp commands, certain block items, 3d, etc. but am familiar with just about everything but I have ALWAYS had this problem. Just recently I have started to really concern myself with keeping my drawings "clean". I do not want dimension styles in my drawings that are not used and/or are not mine! Same with blocks! I would understand if I was copying block items into my new drawings that it might pull in some thing that are used inside the block that you may not see but this is happening when I pull in SINGLE LINES!!! ON LAYERS THAT ARE ALREADY IN MY DRAWING! It will pull in completely unused layers.
Having a problem copy selection with base point and trying to past it in another drawing...
View 2 Replies View RelatedEventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
I have a user that is having a problem with two particular drawings within AutoCAD.
drawing 1 is 4MB
drawing 2 is 17MB
I believe he is attempting to copy some data from drawing 2 to drawing 1.
*nearly* Everytime he opens these two files and switches to 'Model' autocad crashes displaying the message -
--------------------------- AutoCAD LT Alert ---------------------------
AutoCAD LT cannot continue. You can attempt to save changes into the following file up to the start of the last command: S:****************
After you save your changes, you can open or recover the file.
Should AutoCAD LT try to save your changes?
--------------------------- Yes No ---------------------------
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I'm working a drawing orginally developed in C3D 2013 and am now working in 2014. I have developed a speadsheet in Excel 2007 and have link pasted a portion of a worksheet into my drawing. Later, i have to re link paste the same portion of the worksheet after making some edits and the object will now not paste into the drawing.I have tried the following without sucess:
-Load drawing into C3D 2013 and try to paste
-Load drawing into C3D 2014 on another machine and try to paste
-Save excel spreadsheet as a .xls file instead of .xlsx and try to paste
-Run audit in 2014 (no errors) and try to paste
Other drawings loaded into 2014 work OK when link pasting.
I can't paste any object only in one drawing
View 9 Replies View RelatedIs there a way to paste the results of a mass properties query to the drawing rather than to a file?
I have a complex shape that I am analyzing and would like the properties as part of the drawing for refence purposes.
If and how can you copy certain linetypes that are in a drawing and use them in other drawing?
View 1 Replies View RelatedI'm using this function to copy blocks from one drawing to another. It works in AutoCAD 2004, 2006 but I need to know whether will it work in AutoCAD 2010. This is the code that I use and my question is if I add these lines to check version is the method will work or not.
If Left(Application.Version, 2) = "18" Then
Set oDbx = GetInterfaceObject("ObjectDBX.AxDbDocument.18")
End If
Here is the full program:
Private Sub CopyBlock(BlockName As String)
Dim oDbx As Object
' 2007 - 2009 ver.
If Left(Application.Version, 2) = "17" Then
Set oDbx = GetInterfaceObject("ObjectDBX.AxDbDocument.17")
End If
[code]....
Is there a way to copy layers and all the objects associated with it from one drawing to another?
For ex: I am trying to copy office numbers and names (on one layer) from one drawing to another furniture plan drawing. Is there a way to import that layer and all the objects (the office numbers and names in this case) instead of copy/paste each object?
trying to copy info from one drawing into another have do this 3 time before and not the 4th time i get the message
Copy to clipboard failed
what have a done and how do i fix it???