Is there a way to copy layers and all the objects associated with it from one drawing to another?
For ex: I am trying to copy office numbers and names (on one layer) from one drawing to another furniture plan drawing. Is there a way to import that layer and all the objects (the office numbers and names in this case) instead of copy/paste each object?
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
Eventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
I am trying to copy and paste a surveyors drawing into a drawing I've been working on to place my building on the site for oreintation etc.
When I copy and from his drawing onto my clipboard and paste it into mine it is waaaayyyy small.
The scale his drawing says it is drawn in is 1:1
Mine is 1/4"=1'-0"
When I xreffed it into my drawing it did the same thing. What do I do?
There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?
I have a user that is having a problem with two particular drawings within AutoCAD.
drawing 1 is 4MB
drawing 2 is 17MB
I believe he is attempting to copy some data from drawing 2 to drawing 1.
*nearly* Everytime he opens these two files and switches to 'Model' autocad crashes displaying the message -
--------------------------- AutoCAD LT Alert ---------------------------
AutoCAD LT cannot continue. You can attempt to save changes into the following file up to the start of the last command: S:****************
After you save your changes, you can open or recover the file.
Should AutoCAD LT try to save your changes?
--------------------------- Yes No ---------------------------
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedI have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedI have a company template file with standard layers that I need to match the layer properties of with a drawing I have already created. How do I do this?
View 7 Replies View RelatedIf I have BLOCKA on a layer (or specifically layer 0), how do you copy blockA onto every layers? I'm sure there are 5 ways of doing this.
View 9 Replies View RelatedI've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?
View 5 Replies View RelatedIs there a way to lock the layer setup in a viewport, so when i copy and paste it to another paper space tab in the same or different cad file, it keeps the same setup?? (layers frozen / thawed)?
View 6 Replies View RelatedIf and how can you copy certain linetypes that are in a drawing and use them in other drawing?
View 1 Replies View RelatedI'm using this function to copy blocks from one drawing to another. It works in AutoCAD 2004, 2006 but I need to know whether will it work in AutoCAD 2010. This is the code that I use and my question is if I add these lines to check version is the method will work or not.
If Left(Application.Version, 2) = "18" Then
Set oDbx = GetInterfaceObject("ObjectDBX.AxDbDocument.18")
End If
Here is the full program:
Private Sub CopyBlock(BlockName As String)
Dim oDbx As Object
' 2007 - 2009 ver.
If Left(Application.Version, 2) = "17" Then
Set oDbx = GetInterfaceObject("ObjectDBX.AxDbDocument.17")
End If
[code]....
trying to copy info from one drawing into another have do this 3 time before and not the 4th time i get the message
Copy to clipboard failed
what have a done and how do i fix it???
Have several pages that I'd like to copy to a new drawing file. I care about paper space info. Not concerned with model space or view ports.
View 6 Replies View RelatedI've tried this one Autodesk Developer Guide. But it hangs.
What i need to do is copy all objects into a new drawingtemplate and automaticaly run some code over this.
And close the drawing where i started the program.
I have a question. I have several 3d models i've set up with 3d blocks in each one. They're separate to cut down on drawing size. I want to create a database of blocks so to speak by copying all the blocks into one drawing. I tried going through Design Center to copy the blocks in, but it won't let me just copy them. Is there a simple way to do this?
View 1 Replies View RelatedYou can't copy a sheet within a drawing to duplicate it. So, as a workaround, I saved a copy of the drawing to a different name and tried to copy a sheet back. Pick the view in the browser, right click, copy. Switch to the original drawing, right click paste in the browser. All I keep getting is an error "Invalid input for Request." I even think I remember getting this error before and finding a way around it.
View 3 Replies View RelatedAny issues when copying certain object within my drawing from one part of the drawing to another, after selecting the objects I want to copy, I select the destination point and I cannot see any of the objects that I am copying, the command stops working and then I cannot see any objects in my drawing at all....its like I am zoomed out all the way and nothing is in my drawing...I save the drawing as is (seeing nothing on my screen)...calling it up again and all my linework, etc. is there again...it has happened in two different drawings so far within the last few months, and these dwgs. are not linked to each other at all....
View 2 Replies View RelatedFor inventor drawing, is that possible to copy a view from one drawing to another different drawing?
View 2 Replies View RelatedWe installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
I have been sent a drawing of a building site plan...how do i cut out the area i need and then copy that new area into a new sheet
View 3 Replies View RelatedI have AutoCAD 2013. I am trying to paste a block from another drawing to the one I am working on but when I paste the block, the color is different than what it should be. The drawing that I am trying to paste it on was already created for me.
View 3 Replies View RelatedHow do you copy a non-block item from one drawing to another drawing. With both drawings open, the two methods I've used are the Edit>Copy in drawing 1 and Edit>Paste in drawing or Right mouse button (drop down menu)> Copy in drawing 1 and Right mouse button> Paste in drawing 2. Sometimes one or both methods work and at other times neither works.
Is there another copy method or am I doing something incorrectly?
I was using a 3 MB PDF underlay yesterday and zooming/panning/saving operations were very sluggish.
BTW, when I attach a PDF underlay, AUTOCAD allows me to snap to the lines in the PDF and even measure them. Since it recognizes those lines, is there an easy way to copy the lines from the PDF into the drawing?
Using AutoCad 2011. When trying to 'copy/move to end' a 'layout' tab in a drawing, I keep getting the message:
'ERROR:Copy of layout failed'
I have in the past been very successful operating this command in earlier vers of Autocad.
Still getting used to the new versions of AutoCAD, I'm using AutoCAD 2012 Lt version.
So my problem is, I want to copy something from one drawing and paste it into another drawing, however, when I copy over my lines/polylines etc, it comes into the new drawing as one straight line, I assume it is in some other orthographic projection to my current drawing, and I don't know how to change it (rotate it?) to suit the current drawing....
I am trying to copy the block from another drawing but I can not. With this code until I can, but when you close the drawing of the fatal error.
m_blockInstanceId = InsertBlock("CABECALHOQUADRO", Class_Settings.GetCorrectPoint(new Point3d(line.StartPoint.X, line.StartPoint.Y + Class_Settings.DistCabecalho * escala, line.StartPoint.Z), escala), escala, 0, m_attributeValues, m_dynamicPropertyValues);
[code].......
